or 1-800-668-1238 in CANADA IMPORTANT MANUAL DO NOT THROW AWAY INTRODUCTION TABLE OF CONTENTS THANK YOU Thank you for buying this quality product. This modern outdoor power tool will provide many hours of useful service. You will find it to be a great labor-saving device. This operator’s manual provides you with easy-tounderstand operating instructions. Read the whole manual and follow all the instructions to keep your new outdoor power tool in top operating condition. PRODUCT REFERENCES, ILLUST

Properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. SAVE THIS MANUAL FOR FUTURE REFERENCE Thank you for buying a Ryobi trimmer. BC30 RY30060B SS30 RY30040B CS30 RY30020B OPERATOR’S MANUAL 30cc String Trimmers and Brushcutters TABLE OF CONTENTS • Introduction ...........................................................................................

WARNING IMPORTANT • Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns. • When checking the machine to make sure that it is okay before using it, check the area around the muffler and remove any wood chips or leaves which have attached themselves to the brushcutter. Failing to do so could cause the muffler to become overheated, and • Note that usi

(OPT2) TIGHTENING TORQUE : 130~174 in-lbs (14.7~19.6 N.m.) (1) Guard-A : 5764-24000 (2) Guard : 5766-24110 (3) Bracket : 3250-24120 (4) Bolt : 0225-10620 (5) Screw : 0263-30614 (6) Nut : 0280-10605 IMPORTANT Change the loop handle to the J-handle for safe operation. (OPT3) (1) Bracket : 3583-14101 (2) J-handle : 6367-14200 OPT4 (1) (2) (3) (4) (5) (6) (7) (A) (B) (C) (D) (1) 9” 22-tooth : SST229 (2) 9” 24-tooth : SST249 (3) 8” 8-tooth : SGB088 (4) 9” 8-tooth : SGB089 (5) 8” 4-tooth : SGB048 (6)

(OPT4) (1) Bracket: 3583-14101 (2) J-handle: 6367-14200 ¦ BALANCE UNIT 1. Put on strap and attach unit to strap. 2. Slide clamp up or down until unit balances with head just touching on the ground. (OPT5) ¦ STARTING THE ENGINE Please refer 5.For safe operation (P.9~10), 8.Operation (P.18). • The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is WARNING IMPORTANT IMPORTANT OPT4 (1) OPT3 OPT5 (1) (3) (2) OPT2 WARNING IMPORT

(MA5) (1) spark arrester ¦ GEAR CASE (MA6) • The reduction gears are lubricated by multipurpose, lithium-based grease in the gear case. Supply new grease every 25 hours of use or more often depending on the job condition. • Remove the side bolt in gearcase opposite of grease nipple before installing new grease to arrange for old grease to exit. ¦ INTAKE AIR COOLING VENT WARNING •Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engi

WARNING Before using our brushcutters, please read this manual carefully to understand the proper use of your unit. WARNING APPLICABLE SERIAL NUMBERS : BCZ2600S DRIVE UNIT 300001 and up ENGINE UNIT 300101 and up BCZ2600SU DRIVE UNIT 300001 and up ENGINE UNIT 300101 and up BCZ2600SW DRIVE UNIT 300001 and up ENGINE UNIT 300101 and up SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent poss

WARNING IMPORTANT IMPORTANT OPT4 BCZ2600S BCZ2600SU OPT6 OPT5 OPT3 BCZ2600S BCZ2600SU .27 . .28 . 11. Optional blade usage speed is too low, or the blade cuts too deep into weeds. Adjust the engine speed and cutting depth according to the condition of object. • If the grass or other object gets caught in the blade, or if the unit starts to shake or vibrate, turn off the engine and check the whole unit. Change the blade if it has been damaged. • Turn off the engine and make sure the blade has com

13. Parts list Fig.1 DRIVE UNIT BCZ2600S (S/N 300001 and up) BCZ2600SU (S/N 300001 and up) .34 . BCZ2600S (S/N 300001 and up) Fig.1 DRIVE UNIT BCZ2600SU (S/N 300001 and up) Key# Description Part Number Q'ty Key# Description Part Number Q'ty 1A* PIPE-COMP, 1500xo24xT1.7 T3002-12101 1 49 • • NUT 3320-15310 1 1B* PIPE-COMP, 1500xo24xT1.5 T3064-12100 1 50 • PLATE 6489-24120 1 2 SHAFT, 1536xo7, spline 7T 3520-12213 1 51 • BOLT 01252-30514 4 3 GEARCASE-ASSY T3002-13001 1 52 STRAP-ASSY 848B503610 1 4•

CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The California Air Resources Board and KOMATSU ZENOAH are pleased to explain the emission control system warranty on your 1995 and later small off-road engine. In California, new small off-road engines must be designed, built and equipped to meet the state’s stringent anti-smog standards. KOMATSU ZENOAH must warrant the emission control system on your small off-road engine for the periods of time listed below pro