II & III Standard & Quick Hitch, Center Pull Self Leveling or Semi-Mount, Cat.II & III Cutting Capacity 2 inches Cutting Height 2 to 12 inches Deck Thickness 10 gauge Side Bands 7 gauge /10 inches deep Minimum Tractor HP 60 PTO (Pull), 70 PTO (Lift) Driveline ASAE Category 4 Cross Shaft Rubber Element Gearbox HP 120 Main and 90 Outboard Tractor PTO Speed 540/1000 RPM Driveline Protection 4 Plate PTO Slip Clutch Height Adjustment Choice of Manual Height Bundle or Hydraulic Cylinder Bl

4 (540 RPM) Wing Driveline ASAE Cat. 3 Slip Clutches (3) Multiple Plate Clutches Blade Tip speed 15,604 FPM Blades 1/2 x 4 inch Uplift with 6 inch Overlap Type Hitch Self Leveling with Swivel Clevis Wing Flex (Operating) 87° Up to 22° Down Tires Choice of Laminated Tire, Used Aircraft Tire, or Pneumatic 15 inch Wheel Axles Greaseable pivot points with bushings Wheel Shock Protection Springs on Center Section Deflectors Banding and Belting; Chains Optional Options Chain Shielding, Valv

5 (540 RPM), ASAE Cat. 4 (1000 RPM) Wing Driveline ASAE Cat. 4 slip Clutches (3) 2 Friction Plate Clutches Blade Tip speed 15,268 FPM Blades 1/2 x 4 inch Uplift with 6 inch Overlap Type Hitch Self Leveling Pull Type with Swivel Clevis Wing Flex (Operating) 87° Up to 22° Down Tires Choice of Laminated Tire, Used Aircraft Tire, Foam-filled Used Aircraft Tire, or Pneumatic 15 inch Wheel Axles Greaseable pivot points with bushings Wheel shock Protection Independent springs on the deck Defl

5 (540 RPM) Cat. 4 or 5 (1000 RPM) Wing Driveline ASAE Cat. 4 Slip Clutches (2) 2 Friction Plates Blade Tip Speed 16,000 FPM/540 RPM; 15,912 FPM/1000 RPM Blades 1/2 x 4 inches - Uplift with 6 inch Overlap Type Hitch Self Leveling with Perma Level Hitch®, or 2 inch Ball Hitch or Swivel Clevis Hitch Wing Flex 87° Up to 22° Down Tires Laminated, Pneumatic or Aircraft Axles Greaseable with bushings Wheel Shock Protection Independent Springs/Each Axle Deflectors Standard Front Belting and R

5 at 540 RPM Cat. 4 or 5 (1000 RPM) Wing Drivelines ASAE Cat. 4 Slip Clutches (3) Slip clutches, 2 - Friction Plates Each Blade Tip Speed 16,000 FPM /540 RPM; 15,912 FPM /1000 RPM Blades 1/2 x 4 inch uplift with 6 inch overlap Type Hitch Self-Leveling with Perma-Level® Hitch, or available with 2 inch Ball Hitch or Swivel Clevis Hitch Wing Flex 87° up to 22° down Tires Laminated Tire, Used Aircraft Tire, Foam Filled Used Aircraft Tire, Pneumatic 15 inch Wheel (tire not included), 15 inc

5 (540 RPM), Cat. 4 or 5 (1000 RPM) Wing Drivelines ASAE Cat. 5 slip Clutches (3) 4 - Friction Plates Blade Tip speed 16,328 FPM/540 RPM; 16,000 FPM/1000 RPM Blades 1/2 x 4 inch Uplift with 6 inch Overlap Type Hitch Self Leveling with Perma-Level® Hitch, or Available with 2 5/16 inch Ball Hitch Wing Flex 87° Up to 22° Down Tires Laminated Tire, Used Aircraft Tire, Foam Filled Used Aircraft Tire, Pneumatic 15 inch Wheel (tire not included), 15 inch x 6 inch Wheel for 9.5L x 15 inch Tire, M

Bush Hog1' TOUGH LIMITED AVAILABILITY 278 Series Rotary Cutters BUSH HOG® TOUGH FEATURES TOUGH 9 Gauge Deck TOUGH 9 Gauge Sidebands TOUGH Rigid Strongback TOUGH Standard Dual Wheel TOUGH Round Bladeholders TOUGH Powder Coat Paint Cutting Width Cutting Capacity Up to 2 inch Diameter Offset 78№ inches Dimensions (width x length) 8 ft 5 inches x 7 ft 3 inches Transport Width 101 inches Type Hitch 3 Point Category II, Category II Quick Hitch or Pull Cutting Height 21/2 to 10 inches (Lift),

Front & Rear Deflectors Belting is standard, chain deflectors are optional Wheels Laminated Laminated Laminated Approximate Weight (lbs.) 794 lbs. 1, 2 962 lbs. 1, 2 1247 lbs. 1, 3 1 - Weight includes deflector chains front & rear, 2 - Single tailwheel, 3 - Dual tailwheel SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 7 SECTION II PREPARATION FOR USE 2-1 ATTACHING TO TRACTOR WARNING NEVER STAND BETWEEN TRACTOR AND CUTTER WHILE TRACTOR IS BEING BACKED TO HITCH. WARNING ADDITIONAL TRACTOR FRONT B

I, Cat. II Standard & QH 3 Point Cat. I, Cat. II Standard & QH 3 Point Cat. I, Cat. II Standard & and QH Deck Thickness 10 gauge 10 gauge 10 gauge Sidebands 1/4 x 13 inches 1/4 x 13 inches 1/4 x 13 inches Driveshaft ASAE Category 4 ASAE Category 4 ASAE Category 4 Gearbox 130 HP 130 HP 130 HP Tractor PTO Speed 540 RPM 540 RPM 540/1000 RPM Driveline Protection Slip Clutch Standard Slip Clutch Standard Slip Clutch Standard Blade Holder(s) Round Round Round Blades 1/2 x 4 inch uplift 1/2 x 4

I, Cat. II Standard & QH 3 Point Cat. I, Cat. II Standard & QH 3 Point Cat. I, Cat. II Standard & and QH Deck Thickness 10 gauge 10 gauge 10 gauge Sidebands 1/4 x 13 inches 1/4 x 13 inches 1/4 x 13 inches Driveshaft ASAE Category 4 ASAE Category 4 ASAE Category 4 Gearbox 130 HP 130 HP 130 HP Tractor PTO Speed 540 RPM 540 RPM 540/1000 RPM Driveline Protection Slip Clutch Standard Slip Clutch Standard Slip Clutch Standard Blade Holder(s) Round Round Round Blades 1/2 x 4 inch uplift 1/2 x 4