Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
TIP SEAL AND WASHER Occasionally, you will need to replace the silver seal and clear washer located inside the tip base. 1. To replace seal and washer, first loosen tip base with adjustable wrench, and then remove by hand. 2. Remove spray tip. 3. With Phillips screwdriver, push seal and washer out from front of tip base. 4. With flat side of seal facing up, place seal in base. Make sure it lines up properly with base. 5. Place washer in base. Make sure it lines up properly with base. 6. Put spray tip back in tip base. 7. Reattach tip base to gun valve. Make sure spray tip and tip base fit snugly in place. A loose fit can lead to misdirected spray discharge and a skin injection hazard. 1 115 55 Operating Instructions and Assembly Instructions Airless Paint Sprayers Maintenance Chart Maintenance User Item Check Replace Serviceable? Detail Notes Product safety Before each use As required Yes See parts listing for location of product safety labels labels and related part numbers. Trigger adjustment Before each use Yes See trigger lock warning under Spray Gun Maintenance. Airless hose Before each use Yes Read information on the hang tag attached to the high pressure hose for instructions on maintenance. Sealing surfaces Before each use Yes Make sure they are clean. Suction tube Before each use As required Yes Check for nicks and cuts. Bypass tube Before each use As required Yes Check for nicks and cuts. Suction filter Before each use Every 25 gal. or Yes and every 5 gal. more often if required Gun filter Before each use Every 25 gal. Yes Do not attempt to clean gun filter, only replace. Roller nap Before each use As required Yes Prime/spray valve Before each use Every 1000 gal. Yes 3/4” Wrench, torque to 80 in/lbs. Push button Before each use Every 1000 gal. Yes 7/8” Socket or wrench, torque to 200 in/lbs. Block bolts Before each use Do not require Yes Block bolts are to be torqued to 275 in/lbs. in an replacement “X” pattern. These bolts should be checked periwith normal use odically for correct torque. 1/4” Hex. Pressure valve Does not require *SCR 5/8” Wrench, torque to 75 in/lbs. replacement with normal use Inlet valve Every 250 gal. Yes 1-1/16” Wrench, torque to 150 in/lbs. Outlet valve Every 250 gal. Yes 3/4” Wrench torque to 150 in./lbs. Spray tip Before each use Every 20-75 gal. Yes 1” Wrench torque to 135 in/lbs. Diaphragm Every 1000 gal. *SCR This part is only worn out if broken or torn. assembly Oil Every 2000 gal. Yes H-32 Hydraulic oil CH #AL170200AV. Block Does not require Yes replacement with normal use Hose connector Before each use When stripped or leaking under Yes 5/8” -Torque to 350 in/lbs. pressure * Service Center Recommended 16 Operating Instructions and Assembly Instructions Airless Paint Sprayers Notes 17 18 For Replacement Parts and Accessories, Contact Your Local Service Center or Call 1-800-626-4401 Operating Instructions and Assembly Instructions Please provide following information: Address parts correspondence to: - Model number Campbell Hausfeld - Serial number (if any) Attn: Customer Service - Part descriptions and number as shown in parts list 100 Production Drive Harrison, OH 45030 U.S.A. 1 Faceplate screws HP007118AV 10 2 Faceplate AL045102AV 1 3 n Faceplate gasket AL013702AV 1 4 n Piston kit (Includes items 3 and 11-13) AL131502SV 1 5 l Eccentric/bearing AL116204SV 1 6 n Housing AL173304SV 1 7 Pressure valve assembly AL131413SV 1 8 l n Bearing AL013300AV 1 9 n Oil seal AL045503AV 1 10 l Motor MC014503SV 1 11 n Check valve AL163200SV 1 12 n Piston seal AL108802AV 1 13 n Piston spacer AL007001AV 1 14 Diaphragm kit (Includes item 11) AL173700SV 1 15 s Block AL042414SV 1 16 s Inlet valve assembly AL165400SV 1 17 Suction tube assembly AL138404SV 1 18 Suction bell assembly AL111000AJ 1 19 Bypass tube assembly AL174302SV 1 20 s Hose adapter plug AL162600SV 1 21 s Block bolts ST070819AV 4 22 s Outlet valve assembly AL129600SV 1 23 s Hose adapter AL104700SV 1 24 s Prime/spray valve assembly AL132100SV 1 25 s Outlet push button AL159500SV 1 26 † Hydraulic oil, 16 oz. bottle AL170200AV 1 27 Clip, by-pass tube AL167701AV 1 28 † Hose, 5 foot airless whip HA211900AV 1 29 † Hose, 50 foot airless HA211601AV 1 Additional Items Availa ble : n Housing assembly (Includes items 3, 4, 6, 8, 9, 11, 12 & 13) AL173304SV 1 l Motor assembly (Includes items 5, 8 & 10) MC014503SV 1 s Block assembly (Includes items 15, 16, 20, 21, 22, 24 & 25) AL175000SV 1 † Not Shown Ref. Part No. Description No. Q ty. 1 2 3 4 5 6 8 7 9 10 11 13 12 15 14 16 17 18 19 20 21 22 23 24 25 11 27 19 Operating Instructions and Assembly Instructions Replacement Parts List For Replacement Parts and Accessories, Contact Your Local Service Center or Call 1-800-626-4401 Please provide following information: Address parts correspondence to: - Model number Campbell Hausfeld - Serial number (if any) Attn: Customer Service - Part descriptions and number as shown in parts lis...
Эта инструкция также подходит к моделям:Распылители краски - IN425101AV (6.56 mb)
Распылители краски - PS290D (6.56 mb)
Распылители краски - PS270D (6.56 mb)