No user-serviceable parts inside. Risk of electrical shock, fire or death. 5 • Remove battery from Parent’s Unit if it will not be used for a long time. • Remove a dead battery promptly. A dead battery left in unit may leak, damaging your unit. • Do not attempt to recharge a non-rechargeable battery. • A rechargeable battery CANNOT be recharged by plugging AC adapter into the Parent’s Unit. Remove the battery from unit to recharge it. • Charging of a rechargeable battery should only be done by a

The Parent Unit will operate if the rechargeable battery is charged. Selecting Channels • In case you are experiencing some interference, the channel on the Nursery Unit can be changed by pressing the “ch” button on the side of the unit. The Parent Unit will automatically scan all of the available channels until it locks on to the Nursery Unit. If you are still experiencing interference, press the channel button on the side of the Nursery Unit up to 6 times until a good channel is found. 3 Low B

• Do not attempt to recharge a non-rechargeable battery. • A rechargeable battery CANNOT be recharged by plugging the AC adapter into the Nursery Unit. • Remove the batteries from the unit if it is no longer being used or will be stored for an extended period of time. Battery Installation Using AC Adapters + - + -+ - Plug in cord Parent Unit • The battery must be plugged into the Parent Unit before the unit will be ready for use. Remove the battery door cover on the Parent Unit with a key or fla

The green power light should come on. 6. Within a few seconds, the Parent Unit will lock on to the Nursery Unit and the top four (4) green LEDs will shut off. A second later, you will hear a series of beeps and the connection LED should change from red to green. Your monitor is now ready for use. 7. If the top four (4) LEDs do not shut off, power off the Parent Unit and the Nursery Unit and repeat steps 4 and 5 above. 8. If the connection LED on the Parent Unit does not change from red to green

Press “OK” to select. 19 20 21 Press OK for Menu Use UP/DOWN tochoose, OK to select Zoom Menu Zoom In/ Move Zoom Out Back Press OK for Menu 17 Zoom Out Press “OK” to open Menu. Choose the Zoom option and press” Ok” to select it. Choose “Zoom Out” and press “OK” to select it. Monitor will return to live video screen if available. Zoom icon will not be visible on the status screen. The Zoom icon should appear at the top the status screen. Monitor will return to the live video feed if available. 22

• Look for the FCC ID on the bottom of the Nursery Unit and inside the Battery compartment on the Parent Unit. Graco Children’s Products Simple Sounds 2L00 3 Glenlake Pkwy Atlanta, GA 30328 2 Parent Unit • Remove the battery door cover on the Parent Unit with a key or flat blade screw driver. • Place 3-AAA (1.5V-LR03) batteries into the battery compartment. Note the proper orientation of the batteries. • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon zinc), or recharge

The Nursery Unit uses standard 120 volt AC household current. • To use AC adapters, plug the connector on the cord into the AC adapter jack on the side of the Parent Unit and the back of the Nursery Unit. Then plug adapter into a standard wall outlet. • Use ONLY the Graco adapters included with the unit. Do not use these adapters with other equipment under any circumstances. • If units do not work, check that AC adapters are plugged into working outlets. Using AC Adapters • In case you are exper

visit us online at following: We currently do not accept product registrations from those living outside theOR United States of America. 1-800-345-4109 2L01VIB/2L02VIBUltra Clear Product Features Parent’s Unit (PD141837) Model 2L01 - 1 unit Model 2L02 - 2 units Power Power/Volume Clip SoundLights DC Adapter Jack AC Adapter Model 2L01 - Qty. 2 Model 2L02 - Qty. 3 ©2010 Graco PD142728B 4/10 Channel Selector Nursery Unit (PD141818) Model 2L01/2L02 - 1 unit DC Adapter Jack Channel Selector Vibrate N

Selecting Channels 3 Low Battery Indication Parent Unit • When the battery is low in the Parent Unit, the low battery symbol will show in the center of the LCD screen. If operated too long on a low battery, you may also experience a poor signal and the no connection symbol on the LCD screen will appear and you will begin to hear a continuous audible beep from the Parent Unit. • You may either turn off the unit or plug in the A/C adapter to recharge the batteries. Nursery Unit • When the batterie

A second later, you will hear a series of beeps and the connection symbol should change to . Your monitor is now ready for use. NOTE: If the symbol shows, the Parent Unit is out of range of the Nursery Unit. • Temperature sensor measures the temperature of the baby's room and displays it on the LCD of the Parent Unit. • To change °F to °C, hold Volume down button while pressing power button for 2 seconds until it beeps, then press the NightLight button for 2 seconds. Temperature Sensor • NOTE: D