Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
A second later, you will hear a series of beeps and the connection symbol should change to . Your monitor is now ready for use. NOTE: If the symbol shows, the Parent Unit is out of range of the Nursery Unit. • Temperature sensor measures the temperature of the baby's room and displays it on the LCD of the Parent Unit. • To change °F to °C, hold Volume down button while pressing power button for 2 seconds until it beeps, then press the NightLight button for 2 seconds. Temperature Sensor • NOTE: DO NOT put temperature sensor near a heat source or air conditioning vent. • NOTICE: We have added the thermometer for your convenience. Ambient temperature readings may be affected by various factors, including (but not limited to) location with respect to windows, electrical devices and sunlight. We recommend you check the accuracy of the thermometer in its location with your home thermometer. 4 Testing the System Testing the System It is VERY IMPORTANT to test the system when first set up, and at regular times thereafter. Test the units if you suspect they may have been damaged or have not been used for a long time. 1. If two adults are present, have one take the Parent Units to different locations, trying various volume settings, while the other speaks into the Nursery Unit. 2. If only one adult is available, place a ticking clock, radio, or other sound-producing device near the Nursery Unit to test it. 3. When testing, keep the level of your child’s sounds in mind, and adjust the volume accordingly. 4. If there is sound interference, switch the Nursery Unit and the Parent Units to another channel setting. Operation To Listen To Baby • Turn on Nursery Unit using the ON/OFF button. • Turn on one or both Parent Units using the ON/OFF button. • Adjust the volume on the Parent Unit by pressing the Volume Up/Down buttons. Note that the Sound on the bars as the volume button is pressed up or down to provide a visual feedback for the volume level. The unit will beep louder or softer depending on the volume level. • The SoundLights on the Parent Unit will illuminate as your child (or other objects) make noise near the Nursery Unit. Please note that the SoundLights and volume control on the Parent Unit are independent of each other. With the volume turned all the way down, the SoundLights will still illuminate as your child (or other objects) make noise near the Nursery Unit. Parent Finder Feature • This feature will allow you to locate a misplaced Parent Unit as long as the Parent Unit is powered on and within range of the Nursery Unit. • To activate, press the “PF” button on the front of the Nursery Unit (the Nursery Unit needs to be ON). • The Parent Unit will generate an audible beep every second and the SoundLights will flash on and off. • Once the Parent Unit is located, the audible beep can be shut-off by pressing any button on the Parent Unit. Vibration Alert Feature 1.To turn on the Vibration Alert Feature, press and release the button on the left side of the LCD screen. 2. The icon will display on the LCD. NightLight Feature 1.To turn on the NightLight on the Nursery Unit from the Parent Unit press the NightLight Button. This will put the NightLight on the low setting and you will see the low symbol . 2. To turn the NightLight on high setting press the NightLight Button one more time and the high symbol will show. 3. Press NightLight Button again to turn off. 4. The NightLight can be turned on at the Nursery Unit also. Press the NightLight Button on the top of the Nursery Unit once for low setting, twice for high setting and a third time to turn it off. NOTE: When activating the NightLight feature from the Parent Unit, transmission from the child unit to the parent unit is temporarily disabled. 5 Talk Feature • Press and hold Talk Button on Parent Unit to speak to your child through the child unit. You will hear a single beep when the connection to the Nursery Unit is made and you can speak. NOTE: The Talk icon is showing on the LCD screen when Talk feature is active. Talk Feature • Press and hold Talk Button on Parent Unit to speak to your child through the child unit. You will hear a single beep when the connection to the Nursery Unit is made and you can speak. NOTE: The Talk icon is showing on the LCD screen when Talk feature is active. NOTE: When activating the Talk feature from the Parent Unit, transmission from the child unit to the parent unit is temporarily disabled. TroubleShooting DO NOT ATTEMPT to modify the unit. Any modifications to the Nursery Unit and/or Parent Unit can void the operator’s authority to operate the equipment. Most problems have a simple solution. First, Pairing Parent Unit and Nursery Unit. check that: To ensure privacy, your Parent Unit is paired with your Nursery Unit at the factory. Your Parent Unit • Power is turned ON for both units will not work with any other Nursery Unit. • Both units are plugged in (or batteries are fresh in If Parent Unit won’t lock onto the Nursery Unit, ...
Эта инструкция также подходит к моделям:Радионяни - 2M17 (837.88 kb)