The Parent Unit will operate if the rechargeable battery is charged. Selecting Channels • In case you are experiencing some interference, the channel on the Nursery Unit can be changed by pressing the “ch” button on the side of the unit. The Parent Unit will automatically scan all of the available channels until it locks on to the Nursery Unit. If you are still experiencing interference, press the channel button on the side of the Nursery Unit up to 6 times until a good channel is found. 3 Low B

Ultraclear™ Moniteur Manuel d’utilisateur Veuiller garder pour usage ulterieur. Monitor Ultraclear™ Manual del propietario Por favor, conservelo para utilizarlo en el futuro. 2755 Dear Customer, Graco is the recognized leader in the design and manufacture of quality baby products. We believe your new Graco nursery monitor is a wise choice. Before using your nursery monitor, please take a few minutes to read this Owner’s Manual. The short time you spend reading these instructions will help you us

No user-serviceable parts inside. Risk of electrical shock, fire or death. 5 • Remove battery from Parent’s Unit if it will not be used for a long time. • Remove a dead battery promptly. A dead battery left in unit may leak, damaging your unit. • Do not attempt to recharge a non-rechargeable battery. • A rechargeable battery CANNOT be recharged by plugging AC adapter into the Parent’s Unit. Remove the battery from unit to recharge it. • Charging of a rechargeable battery should only be done by a

Any ............................................................................ .......................................................................................... .......................................... ........................................................................................ check that: ....................................................................V .............................................................................................. ...................

Press “OK” to select. 19 20 21 Press OK for Menu Use UP/DOWN tochoose, OK to select Zoom Menu Zoom In/ Move Zoom Out Back Press OK for Menu 17 Zoom Out Press “OK” to open Menu. Choose the Zoom option and press” Ok” to select it. Choose “Zoom Out” and press “OK” to select it. Monitor will return to live video screen if available. Zoom icon will not be visible on the status screen. The Zoom icon should appear at the top the status screen. Monitor will return to the live video feed if available. 22

1). Figure 1 fig. 1 Sensor Pad Sensor Pad CORRECT INCORRECT PLACEMENT OF SENSOR PAD CORD CORRECT Sensor Pad Centered Turquoise Side Up INCORRECT Sensor Pad Off Center INCORRECT Sensor Pad Turquoise Side Down POSITION OF SENSOR PAD UNDER MATTRESS (Top Down View of Crib) fig. 2 IMPORTANT: Only use the AC adapters included with your monitor. Do not use these adapters with any other equipment. Movement Sensitivity Control. The movement sensitivity control is on the back of the Nursery Unit. The leve

• Look for the FCC ID on the bottom of the Nursery Unit and inside the Battery compartment on the Parent Unit. Graco Children’s Products Simple Sounds 2L00 3 Glenlake Pkwy Atlanta, GA 30328 2 Parent Unit • Remove the battery door cover on the Parent Unit with a key or flat blade screw driver. • Place 3-AAA (1.5V-LR03) batteries into the battery compartment. Note the proper orientation of the batteries. • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon zinc), or recharge

3. Aim the Nursery Unit toward your baby. Check that there are no walls or large objects that could block sound transmission. 4. Turn on the Nursery Unit using the ON/OFF switch. The green power light should come on. 5. Install a 9 volt battery into the Parent’s Unit, or plug it into a working 120 volt AC outlet using the other AC adapter. 6. Turn on the Parent’s Unit using the volume control dial. The red power light should come on. • The Parent’s Unit can use either a 9 volt battery or standar

The green power light should come on. 6. Within a few seconds, the Parent Unit will lock on to the Nursery Unit and the top four (4) green LEDs will shut off. A second later, you will hear a series of beeps and the connection LED should change from red to green. Your monitor is now ready for use. 7. If the top four (4) LEDs do not shut off, power off the Parent Unit and the Nursery Unit and repeat steps 4 and 5 above. 8. If the connection LED on the Parent Unit does not change from red to green

ultra clear™ vibe Baby Monitor ©2008 Graco PD106594B 11/08 VOLCHOWNER’S MANUAL Keep instructions for future use. ultra clear™ vibe Baby Monitor ©2008 Graco PD106594B 11/08 WARNING WARNING Failure to follow these warnings and the assembly instructions could result in serious injury or death. This device is designed only to monitor the sounds of your child. It will not alert you to your child’s silent activities. When using the monitor, you must still provide the supervision necessary for the cont