Press “OK” to select. 19 20 21 Press OK for Menu Use UP/DOWN tochoose, OK to select Zoom Menu Zoom In/ Move Zoom Out Back Press OK for Menu 17 Zoom Out Press “OK” to open Menu. Choose the Zoom option and press” Ok” to select it. Choose “Zoom Out” and press “OK” to select it. Monitor will return to live video screen if available. Zoom icon will not be visible on the status screen. The Zoom icon should appear at the top the status screen. Monitor will return to the live video feed if available. 22

Do not put the Nursery Units inside a crib or playard. • Use ONLY with 110-120 volt AC electrical outlets. • Protect the AC adapter cords. Place them so they are not walked on or pinched by furniture or other items. • Allow for proper ventilation when units are in use. Do not cover the Nursery Units or such as a blanket. Do not place them in a drawer or in any location which would muffle the sound or interfere with the normal flow of air. • DO NOT immerse any part of the Nursery Units, Parent Un

Movement Sensor With Sound Monitor OWNER'S MANUAL Micro. Tic/Alarm Low Batt. Movement Sensor With Sound Monitor OWNER'S MANUAL KEEP INSTRUCTIONS FOR FUTURE REFERENCE. ©2008 Graco ISPD026BB 11/08 Failure to follow these warnings and the assembly instructions could result in serious injury or death. This device is designed to aid in themonitoring of your child. When using themonitor, you must still provide the supervision necessary for the continued safety of yourchild. This product is not designe

Five seconds later the alarm will sound and the red Alarm Indicator Light will flash continuously. You can also test for movement with the Nursery Unit set to the “Tic Off” position. In this case, you will not hear a constant ticking when you touch the mattress. When you remove your hand from the mattress the Movement Indicator Light will stop flashing, a pre-alarm beep will sound after 15 seconds, and five seconds later the alarm will sound and the red Alarm Indicator Light will flash continuou

1). Figure 1 fig. 1 Sensor Pad Sensor Pad CORRECT INCORRECT PLACEMENT OF SENSOR PAD CORD CORRECT Sensor Pad Centered Turquoise Side Up INCORRECT Sensor Pad Off Center INCORRECT Sensor Pad Turquoise Side Down POSITION OF SENSOR PAD UNDER MATTRESS (Top Down View of Crib) fig. 2 IMPORTANT: Only use the AC adapters included with your monitor. Do not use these adapters with any other equipment. Movement Sensitivity Control. The movement sensitivity control is on the back of the Nursery Unit. The leve

Selecting Channels 3 Low Battery Indication Parent Unit • When the battery is low in the Parent Unit, the low battery symbol will show in the center of the LCD screen. If operated too long on a low battery, you may also experience a poor signal and the no connection symbol on the LCD screen will appear and you will begin to hear a continuous audible beep from the Parent Unit. • You may either turn off the unit or plug in the A/C adapter to recharge the batteries. Nursery Unit • When the batterie

A second later, you will hear a series of beeps and the connection symbol should change to . Your monitor is now ready for use. NOTE: If the symbol shows, the Parent Unit is out of range of the Nursery Unit. • Temperature sensor measures the temperature of the baby's room and displays it on the LCD of the Parent Unit. • To change °F to °C, hold Volume down button while pressing power button for 2 seconds until it beeps, then press the NightLight button for 2 seconds. Temperature Sensor • NOTE: D

ultra clear™ vibe Baby Monitor ©2008 Graco PD106594B 11/08 VOLCHOWNER’S MANUAL Keep instructions for future use. ultra clear™ vibe Baby Monitor ©2008 Graco PD106594B 11/08 WARNING WARNING Failure to follow these warnings and the assembly instructions could result in serious injury or death. This device is designed only to monitor the sounds of your child. It will not alert you to your child’s silent activities. When using the monitor, you must still provide the supervision necessary for the cont

7 Make sure battery door is completely closed. .................................................................................. A dead battery left in the unit may leak, damaging your unit. ............................................................ ................................................ ...................................................................... recharged by plugging the AC adapter into the ........................ ........................................................

Any ............................................................................ .......................................................................................... .......................................... ........................................................................................ check that: ....................................................................V .............................................................................................. ...................