Оценок - 3, средний балл: 5 ( )

Производитель: Bissell Размер: 442.84 kb Название файла: Язык инструкции:

4. WARNING: Use only BISSELL Little Green formula in yourcleaner. Use of cleaningformulas which contain lemon or pine oil maydamage this applianceand void warranty. Chemical spot cleanersor solvent-based soil removers should not be used. These productsmay react with the plastic materials used in your cleaner, causingcracking or pitting. POWER HEATER Power Switch Heater Switch Heat Indicator Light B R US H S U C T IO N 7 Remove Vacuum Flex Hose completely from On Board Hose Storage. Attach 4” Tool, TurboBrush* or Crevice Tool* to Grip Trigger Unit by pressing Tool onto Grip/Trigger Unit firmly, until button snaps into hole. Make certain Tool is securely attached. Unwrap Power Cord completely from On Board Cord Storage and plug into 1230 Volt, 60 Hz grounded outlet as described in Important Safety Instructions, page 3. Turn Power switch to ON Position. Note: If your LIttle Green has a built-in heater, refer to instructions on page 7. Press and hold Spray Trigger on Grip/Trigger unit. Spray will start in a few seconds. Raise the Tool slightly to check for spray. If spray does not start, press firmly on the front of the Solution Tank while depressing Spray Trigger. *Optional on some Little Green models. To order optional parts not originally included in your Little Green model, call BISSELL Consumer Services at the telephone num- ber listed on page 9. Pre-treat stained or highly soiled areas: Hold the flex hose with tool attached above carpet or upholstery, and pull trig- ger to spray cleaning solution. Wait 3-5 minutes before cleaning. 6. 5. 1. 2. 3. 4. How To Deep Clean Carpet or Upholstery Getting Ready WARNING: Be sure to unplug thecord before attaching the Turbobrush. 1. 2. Pre-treating 6. 5. 1. 2. 3. 4. How To Deep Clean Carpet or Upholstery Getting Ready WARNING: Be sure to unplug thecord before attaching the Turbobrush. 1. 2. Pre-treating Place the tool directly on soiled surface at arms length. Apply downward pressure on the tool and pull toward you, while pulling trigger to spray cleaning solution. Note: If using the TurboBrush, the switch should be in the “BRUSH” position. This activates the brush only. Repeat, keeping the tool firmly against the surface. Continue until no more dirt can be removed. Do not overwet. Note: If using the Turbobrush, move the switch to the “SUCTION” position. This activates the suction to remove the dirt and cleaning solution. Move the switch back to the “BRUSH” position for additional brushing action. Do not overwet. Release spray trigger. Vacuum area until no more cleaning solution can be removed. Note: If using the Turbobrush, move the switch to the “SUCTION” position. This activates the suction to remove the dirt and cleaning solution. If the tool stops spraying, turn OFF Power Switch and check cleaning solution level. Refill if needed. Never run dry. Check the manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your Little Green. If tag is coded with an “S” (with diagonal strike-through), or says “Dry Clean Only,” do not proceed. If manufacturer’s tag is missing or not coded, check with your furniture dealer. If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet. 8 BRUSH SUCTION 3. 4. 1. 2. Deep Cleaning 3. Deep Cleaning Upholstery 1. 2. Tip: Check upholstery stuffing before cleaning. Colored stuffing may bleed through fabric when wet. Tip: Deep cleaning stairs and high traffic areas on a regular basis can prolong carpet life. BRUSH SUCTION 3. 4. 1. 2. Deep Cleaning 3. Deep Cleaning Upholstery 1. 2. Tip: Check upholstery stuffing before cleaning. Colored stuffing may bleed through fabric when wet. Tip: Deep cleaning stairs and high traffic areas on ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: