Оценок - 2, средний балл: 4 ( )

Производитель: Bissell Размер: 442.84 kb Название файла: Язык инструкции:

Add BISSELL Little Green Formula to the FORMULA fill line (8-oz.) on Solution Tank. NOTE: Your Little Green is shipped with an 8 oz. starter bottle of formula. Fill the Solution Tank with hot (NOT boiling) tap water to the WATER fill line. Replace the cap before placing the Solution Tank back into the unit. Replace the Solution Tank by pacing it bottom first into the cavity, then tilting it, pressing gently at top until it snaps closed. Collection Tank The Collection Tank is the translucent tank at your left as you face the Little Green. It is removed and replaced on the unit just like the Solution Tank. Empty the Collection Tank after each use, when dirty water reaches the indicated maximum fill line, or as instructed in this User’s Guide. 5 Water Fill Line Formula Fill Line 6 Product Features Continued Vacuum Flex Hose with Grip/Trigger Unit Store in the on-board hose storage on the back of the Little Green. Cleaning tools attach to the Grip/Trigger unit. Power Cord The cord, with a three-prong grounded plug, stores in the On Board Cord Storage at the bottom of the Little Green. Note: Unwrap Power Cord completely before operating unit. Built-in-heater Not included with all models With the Little Green ProHeat, you have the ability to turn on, or leave off, the built-in heater, based on your cleaning needs. The Little Green ProHeats’ built-in heater will raise the water temperature for improved cleaning performance. To use Little Greens’ built-in heater, first turn the Power Switch ON and then turn the Heater Switch ON. Within 30 seconds, the Heat Indicator Light will illuminate, indicating the heater has reached the correct temperature. Begin using by depressing the Spray Trigger. Wait 5-10 seconds for non-heated water and solution mixture to travel through the Flex Hose. After 5-10 seconds, the heated water and solution mixture is ready to be applied to carpet or upholstery. See Page 8 for cleaning instructions. Depending on which model you purchased, your Little Green may be equipped with one or more of these tools: 4” wide Cleaning Tool (included with all models)-For cleaning carpet, upholstery and spot cleaning Spraying Crevice Tool-For cleaning in tight areas 6” wide Cleaning Tool-For larger areas TurboBrush Cleaning Tool-Rotating brush for extra cleaning action for small areas, upholstery and stairs To order optional tools not originally included with your Little Green see “Part Numbers and Descriptions,” page 9 Specialized Cleaning Tools 1. 2. 3. 4. WARNING: Use only BISSELL Little Green formula in yourcleaner. Use of cleaningformulas which contain lemon or pine oil maydamage this applianceand void warranty. Chemical spot cleanersor solvent-based soil removers should not be used. These productsmay react with the plastic materials used in your cleaner, causingcracking or pitting. POWER HEATER Power Switch Heater Switch Heat Indicator Light B R US H S U C T IO N 7 Remove Vacuum Flex Hose completely from On Board Hose Storage. Attach 4” Tool, TurboBrush* or Crevice Tool* to Grip Trigger Unit by pressing Tool onto Grip/Trigger Unit firmly, until button snaps into hole. Make certain Tool is securely attached. Unwrap Power Cord completely from On Board Cord Storage and plug into 1230 Volt, 60 Hz grounded outlet as described in Important Safety Instructions, page 3. Turn Power switch to ON Position. Note: If your LIttle Green has a built-in heater, refer to instructions on page 7. Press and hold Spray Trigger on Grip/Trigger unit. Spray will start in a few seconds. Raise the Tool slightly to check for spray. If spray does not start, press firmly on the front of the Solution Tank while depressing Spray Trigger. *Optional on some Little Green models...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: