Оценок - 1, средний балл: 4 ( )

Производитель: Bissell Размер: 442.84 kb Название файла: Язык инструкции:

Remove Collection Tank, fill with clean water, rinse thoroughly and discard, then replace. Disconnect the tool from Grip/Trigger unit by pushing down on button lock and pulling straight off (Do NOT twist tools to remove them). Once removed from the Vacuum/Flex Hose, the tools can be cleaned: 4”, 6”, or Crevice tool-Rinse under clean running water.TurboBrush tool-Switch must be in “SUCTION” posi- tion. Rinse under clean running water. Check Spray Nozzle for accumulated dirt or debris. If neces- sary, clean with soft bristle brush. Wipe all surfaces with a soft cloth. Wrap Power Cord around Onboard Cord Storage at the bottom of Little Green. Wrap Vacuum Flex Hose around Onboard Hose Storage and secure Grip/Trigger. Store Cleaner in protected, dry area, at room temperature (40. to 110.F). Note: For Little Green TurboBrush Models, on-board storage for the TurboBrush Tool has been provided on the back of the unit. Attach the TurboBrush to the unit by pressing onto holder firmly until button snaps into hole. Storage BRUSH SUCTION TurboBrush Cord Storage Flex Hose 1. 2. 3. 4. 5. 6. 7. 1. 4. 10 Troubleshooting Cleaner won’t run. Possible Causes Remedies Power Unit not plugged in Check electrical plug Blown fuse/tripped breaker Replace household fuse or Reset Breaker Call BISSELL Customer Service Reduced spray or no spray Possible Causes Remedies Spray Nozzle clogged Clean Spray Nozzle Solution Tank empty Check/Refill Tank Solution Tank outlet clogged Clean outlet at bottom of Solution Tank Pump needs priming Push firmly on Solution Tank front while depressing Spray Trigger Vacuum won’t pick up cleaning solutionPossible Causes Remedies Poor Upholstery/Carpet Tool Reposition Upholstery/Carpet Tool on position surface, follow recommended cleaning procedures Collection Tank is full Empty Collection Tank Upholstery/Carpet Tool Brush worn Replace with new Brush Excess solution in Vacuum Flex Hose Lift Tool and point upwards to allow water in Hose to flow into the Collection Tank Incorrect switch position on TurboBrush Reposition switch to “Suction” Position Excessive Foam in the Collection Tank Possible Causes Remedies Residue left in carpet or fabric Flush carpet by using clear water in form prior cleaning Solution Tank Check Tank often/empty as necessary Incorrect cleaning formula Use BISSELL Little Green formula only TurboBrush attachment-Brush will not turn Possible Causes Remedies Incorrect switch position on TurboBrush Reposition switch to “Brush” position WARNING: To reduce the risk of injury from moving partsand/or electrical shock, turn Power Switch OFF and disconnect polarizedplug from electrical out- let before performing troubleshooting checks. Troubleshooting Cleaner won’t run. Possible Causes Remedies Power Unit not plugged in Check electrical plug Blown fuse/tripped breaker Replace household fuse or Reset Breaker Call BISSELL Customer Service Reduced spray or no spray Possible Causes Remedies Spray Nozzle clogged Clean Spray Nozzle Solution Tank empty Check/Refill Tank Solution Tank outlet clogged Clean outlet at bottom of Solution Tank Pump needs priming Push firmly on Solution Tank front while depressing Spray Trigger Vacuum won’t pick up cleaning solutionPossible Causes Remedies Poor Upholstery/Carpet Tool Reposition Upholstery/Carpet Tool on position surface, follow recommended cleaning procedures Collection Tank is full Empty Collection Tank Upholstery/Carpet Tool Brush worn Replace with new Brush Excess solution in Vacuum Flex Hose Lift Tool and point upwards to allow water in Hose to flow into the Collection Tank Incorrect switch position on TurboBrush Reposition switch to “Suction” Position Excessive Foam in the Collection Tank Possible Cau...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: