Arc Welding Safety Warnings and Precautions Warning:This product, when used for welding and similar applications, produces chemicals known to the State of California to cause cancer and birth defects (or other reproductive harm). California Health & Safety Code 25249.5, et seq. 1. Avoid electrical shock. Do not permit electrically live parts, cables, or electrodes to contact skin, clothing, or gloves. Protective clothing should be free of holes, dry, and ANSI approved. This unit draws enough cur

Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this product was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this product, and do not use this product for a purpose for which it was not intended. Turn off the Tool and unplug the 6. Power Cord Plug from its electrical outlet before changing accessories or performing inspection, maintenance, or cleani

Read warning labels if taking prescription medicine to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool. 19. Use proper size and type extension cord. If an extension cord is required, it must be of the proper size and type to supply the correct current to the compressor without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the compressor. Check your air compressor’s manual

Any part that is damaged should be properly repaired or replaced by a qualified technician. Replacement parts and accessories7. . When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this product. Do not excessively overload the 8. shelves. Never use the Hanging Cabinet as a 9. seat, a stool or a ladder. Use eye protection10. . Wear ANSI- approved impact safety goggles when assembling. Warning: The warning

All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353. Thank you for choosing a Harbor Freight Tools product. For future reference, please complete the owner’s record below: Model: Purchase Date: Save the receipt, warranty and these instructions. It is important that you read this entire instruc

Use of any other parts will void the warranty. Only use parts and accessories intended for use with this tool, which are available from Harbor Freight Tools. SPECIAL WARNINGS WHEN USING THIS LOG SPLITTER Using this poweful tool may create special hazards. Take particular care to safeguard yourself and those around you. Hydraulic systems. Never operate this tool if there is a hazard presented by hydraulic fluid. Before using the splitter, check for hydraulic leaks. Be sure the tool and your work

The Main Handle (91) can be pointed either right or left. There are symbols for a Hammer and Drill on the left side and a symbol for a Drill only on the right side. To drill only, set the Switching Knob (22) so that the picture of the Hammer and Drill are facing forward. Turn the Main Handle (91) so that it points to the right at the Drill symbol (See Figure 2). To Hammer Drill, set the Switching Knob (22) so that the Hammer and Drill are facing forward. Turn the Main Handle (91) so that it poin

Insert Hex Head Bolt (#16A) through the Supporting Plates and through the Lower Frame Assembly (#3A) and hand tighten on Hex Nut (18A)-see Figure 3. Repeat for second side. Step 7) Secure the other end of each Supporting Plate (#7A) to one end of the Base Assembly (#5A) as in Figure 3. Insert Hex Head Bolt (#15A) and tighten on Hex Nut (#18A). Tighten Hex Nut (#18A) from Step 5. Repeat for second side. Step 8) Insert Hex Head Bolt (#16A) through the middle hole in the Base Assembly (#5A) and thr

Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this product! 1. Avoid working alone. If an accident happens, an assistant can bring help. 2. Keep work area clean.

All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions please call 1-800-444-3353 SPECIFICATIONS ITEM DESCRIPTION Caulking Gun 23 Ga. Sheet Steel (Stamped and Formed) Finish Blue Paint w/Zinc Plating Steel Rod w/ Steel Rivets 0.288 “ Handle 4” Square Overall Size 12 1/2” Long X 2 1/8” Wide (Tube) Capacity 9” for Standard Caulking Tube Weigh