Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Contact a service representative. •Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray. •Change the printer option and try again. Go to Printing Preferences, click Paper tab, and set type to Thin (See "Opening printing preferences" on page 53). Copying problems •If the defects are on the original, use Darkness in Copy feature to lighten the background of your copies (See "Changing the darkness" on page 60). •If there are no defects on the original, clean the scan unit (See "Cleaning the scan unit" on page 89). •Ensure that the original is face down on the scanner glass or face up in the document feeder. •Check that the copy paper is loaded correctly. •Replace the paper in the tray with paper from a new package. •In high humidity areas, do not leave paper in the machine for extended periods of time. •Fan the stack of paper, then turn it over in the tray. Replace the paper in the tray with a fresh supply. Check/adjust the paper guides, if necessary. •Ensure that the paper is the proper paper weight. •Check for copy paper or pieces of copy paper remaining in the machine after a paper jam has been cleared. •Your originals may contain pictures, solids, or heavy lines. For example, your originals may be forms, newsletters, books, or other documents that use more toner. •The scanner lid may be left open while copies are being made. •Turn the machine off and back on. Scanning problems •Make sure that you place the original to be scanned face down on the scanner glass, or face up in the document feeder. •There may not be enough available memory to hold the document you want to scan. Try the Prescan function to see if that works. Try lowering the scan resolution rate. •Check that the machine cable is connected properly. •Make sure that the machine cable is not defective. Switch the cable with a known good cable. If necessary, replace the cable. •Check that the scanner is configured correctly. Check scan setting in the SmarThru or the application you want to use to make certain that the scanner job is being sent to the correct port (for example, USB001). •Check if the machine is printing received data. If so, scan the document after the received data has been printed. •Graphics are scanned more slowly than text. •Communication speed slows in scan mode because of the large amount of memory required to analyze and reproduce the scanned image. Set your computer to the ECP printer mode through BIOS setting. It will help to increase the speed. For details about how to set BIOS, refer to your computer user’s guide. •Device can’t be set to the H/W mode you want. •Port is being used by another program. •Port is Disabled. •Scanner is busy receiving or printing data. When the current job is completed., try again. •Invalid handle. •Scanning has failed. •There may be a copying or printing job in progress. Try your job again when that job is finished. •The selected port is currently being used. Restart your computer and try again. •The machine cable may be improperly connected or the power may be off. •The scanner driver is not installed or the operating environment is not set up properly. •Ensure that the machine is properly connected and the power is on, then restart your computer. •The USB cable may be improperly connected or the power may be off. Fax problems •Unplug the power cord and plug it in again. •Ensure that there is power being supplied to the electrical outlet. •Check that the phone line is properly connected. •Check that the phone socket on the wall is working by plugging in another phone. •Make sure that the paper is not wrinkled and you are inserting it in correctly. Check that the original is the right size, not too thick or thin. •Make sure that the document feeder is firmly closed. •The document feeder rubber pad may need to be replaced. Contact a service representative. •The receiving mode should be set to fax. •Make sure that there is paper in the tray. •Check to see if the display shows any error message. If it does, clear the problem. •Make sure that the original is loaded in the document feeder or on the scanner glass. •Check the fax machine you are sending to, to see if it can receive your fax. •The fax machine sending you the fax may be faulty. •A noisy phone line can cause line errors. •Check your machine by making a copy. •A toner cartridge has reached its estimated cartridge life. Replace the toner cartridge (See "Replacing the toner cartridge" on page 107). Samsung Scan Manager Problem Common Windows problems Refer to Microsoft Windows User’s Guide that came with your computer for further information on Windows error messages. Common Linux problems •Check if the printer driver is installed in your system. Open Unified Driver Configurator and switch to the Printers tab in Printers configuration window to look at the list of available machines. Make sure that your machine is displayed on the list. If not, open Add new printer wizard to set up your device. •Check if th...
Эта инструкция также подходит к моделям:Принтеры - SCX-4600 (6.93 mb)
Принтеры - SCX-4600K (6.93 mb)
Принтеры - SCX-4600L (6.93 mb)
Принтеры - SCX-4601 (6.93 mb)