Оценок - 3, средний балл: 4.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
This chapter includes: •Redistributing toner •Clearing original document jams •Tips for avoiding paper curls •Tips for avoiding paper jams •Clearing paper jams •Understanding display messages •Solving other problems REDISTRIBUTING TONER •White streaks or light printing occurs. •Prepare new cartridge appears on the display. •The Status LED blinks red. 1.Open the front door. 2.Pull the toner cartridge out. 3.Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area. 4.Hold the toner cartridge by the handle and slowly insert the cartridge into the opening in the machine. Tabs on the sides of the cartridge and corresponding grooves within the machine will guide the cartridge into the correct position until it locks into place completely. 5.Close the front door. Ensure that the cover is securely closed. CLEARING ORIGINAL DOCUMENT JAMS To avoid tearing the document, remove the jammed document slowly and gently. To prevent document jams, use the scanner glass for thick, thin, or mixed paper-type originals. 1.Remove any remaining pages from the document feeder. 2.Open the document feeder cover. 3.Gently remove the jammed paper from the document feeder. If you see no paper in this area, go to step 5. 4.Close the document feeder cover. Reload the pages you removed, if any, in the document feeder. 5.Open the scanner lid. 6.Seize the misfeed paper, and remove the paper from the feed area by carefully pulling it to the right using both hands. 7.Close the scanner lid. Load the removed pages back into the document feeder. TIPS FOR AVOIDING PAPER CURLS 1.Open the rear door. 2.Pull down the pressure lever on each side. Keep the rear cover opened during printing. Only use when the printout has more than 20 mm curl. TIPS FOR AVOIDING PAPER JAMS •Ensure that the adjustable guides are positioned correctly (See "Loading paper in the tray" on page 47). •Do not overload the tray. Ensure that the paper level is below the paper capacity mark on the inside of the tray. •Do not remove paper from the tray while your machine is printing. •Flex, fan, and straighten paper before loading. •Do not use creased, damp, or highly curled paper. •Do not mix paper types in a tray. •Use only recommended print media (See "Setting the paper size and type" on page 50). •Ensure that the recommended side of the print media is facing down in the tray, or facing up in the manual tray. CLEARING PAPER JAMS To avoid tearing the paper, pull the jammed paper out slowly and gently. Follow the instructions in the following sections to clear the jam. In tray 1 Click this link to open an animation about clearing a jam. 1.Open and close the front door. The jammed paper is automatically ejected from the machine. If the paper does not exit, go to the next step. 2.Pull out tray 1 . 3.Remove the jammed paper by gently pulling it straight out. If the paper does not move when you pull, or if you do not see the paper in this area, check the fuser area around the toner cartridge (See "Inside the machine" on page 93). 4.Insert tray 1 back into the machine until it snaps into place. Printing automatically resumes. In the manual tray Click this link to open an animation about clearing a jam. 1.If the paper is not feeding properly, pull the paper out of the machine. 2.Open and close the front door to resume printing. Inside the machine Click this link to open an animation about clearing a jam. The fuser area is hot. Take care when removing paper from the machine. 1.Open the front door and pull the toner cartridge out, lightly pushing it down. 2.Remove the jammed paper by gently pulling it straight out. 3.Replace the toner cartridge and close the front door. Printing automatically resumes. In exit area Click this link to open an animation about clearing a jam. 1.Open and close the front door. The jammed paper is automatically ejected from the machine. If you do not see the jammed paper, go to next step. 2.Gently pull the paper out of the output tray. If you do not see the jammed paper or if there is any resistance when you pull, stop and go to the next step. 3.Open the rear door. 4.Pull the pressure levers down and remove the paper. If you do not see the jammed paper, go to next step. 5.Pull the fuser cover levers down and remove the paper. Return the fuser cover levers to their original position. The fuser area is hot. Take care when removing paper from the machine. 6.Return the pressure levers to their original position. 7.Close the rear door. 8.Open and close front door, printing automatically resumes. UNDERSTANDING DISPLAY MESSAGES Checking display messages •If a message is not in the table, reboot the power and try the printing job again. If the problem persists, call for service. •When you...
Эта инструкция также подходит к моделям:Принтеры - SCX-4600 (6.93 mb)
Принтеры - SCX-4600K (6.93 mb)
Принтеры - SCX-4600L (6.93 mb)
Принтеры - SCX-4601 (6.93 mb)