Оценок - 4, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
STEREO channels Parameter Pair Recall Safe ISOLATION Recall Safe — Fade Time MATRIX FADER, ALL Insert MATRIX ALL MATRIX INSERT, MATRIX ALL On MATRIX ALL Fader MATRIX FADER, ALL BALANCE — MATRIX ALL Comp MATRIX COMP, ALL EQ MATRIX EQ, ALL Delay On MATRIX DELAY, ALL Delay TIME GANG MATRIX DELAY, ALL Mute Assign MATRIX ALL DCA Assign MATRIX ALL PAIR MATRIX ALL Global Paste — Solo Safe — Cue — Mute Safe — Selective Recall — Tracking Recall — Patch — — MIX PATCH, MIX ALL OUTPUT ISOLATION — Parameter Pair Recall Safe ISOLATION Recall Safe — Fade Time ST FADER, ALL Insert ST ALL ST INSERT, ST ALL On ST ALL Fader ST FADER, ALL BALANCE — ST ALL Comp ST COMP, ALL EQ ST EQ ALL Delay On ST DELAY, ALL Delay TIME GANG ST DELAY, ALL Mute Assign ST ALL DCA Assign ST ALL MONO — ST ALL To Matrix On ST TO MTRX, ALL To Matrix LEVEL ST TO MTRX, ALL To Matrix POINT ST TO MTRX, ALL To Matrix PAN — ST ALL Global Paste — Solo Safe — Cue — Mute Safe — Selective Recall — Tracking Recall — Patch — — MIX PATCH, MIX ALL OUTPUT ISOLATION — . Other Parameter Pair Recall Safe ISOLATION INPUT PATCH Turn off the library link.* — OUTPUT PATCH Turn off the library link.* — EFF1-8 EFF1-8 GEQ 1-20 LINK GEQ 1-20 DCA FADER,MUTE DCA1-8 — DCA FADE TIME DCA1-8 — DCA NAME DCA1-8 (WITH NAME) — MUTE MASTER MUTE MASTER — MIDI REMOTE MIDI REMOTE A-D — PLUG-IN PLUG-IN 1-4 — * The parameter becomes eligible for Recall Safe if the library link is turned off in the SCENE screen. PM5D/PM5D-RH V2 / DSP5D Bedienungsanleitung Referenzteil Die folgende Tabelle listet das Verhalten der Kanalparameter auf, wenn INPUT/ST-IN-, MIX- oder MATRIX-Kanale paarig Die folgende Tabelle listet das Verhalten der Kanalparameter auf, wenn INPUT/ST-IN-, MIX- oder MATRIX-Kanale paarig MIX MATRIX LCR On/Off LCR Center-Side Ratio Fade Time On/Off Fade Time Start Offset Fade Time Fading Time Insert In On/Off Insert Point Direct Out On/Off Direct Out Point On/Off Level Master Level GATE On/Off GATE Key In Source GATE Key In Filter On GATE Filter Type GATE Filter Freq. GATE Filter Q GATE Type GATE Attack GATE Range GATE Hold GATE Decay GATE Threshold COMP LINK 1-8 COMP LINK A-H COMP On/Off COMP Key In Source COMP Key In Type COMP Attack COMP Release COMP Ratio COMP OutGain COMP Knee/Width COMP Threshold EQ LINK 1-8 EQ LINK A-F EQ LINK G,H HPF On/Off EQ HPF On/Off x2 EQ HPF On/Off HPF Freq EQ Type 1,2 EQ On/Off EQ Filter Type x2 EQ Filter Type x4 EQ Filter Type x2 EQ LPF On/Off EQ LPF On/Off x2 EQ LPF On/Off EQ Q x4 EQ Q x8 EQ Q x4 EQ Freq x4 EQ Freq x8 EQ Freq x4 EQ Gain x4 EQ Gain x8 EQ Gain x4 EQ Bypass x8 EQ Bypass x4 Delay On/Off Surround LFE Surround Div. Surround Div.Rear Surround Div.Link Mute Group 1-8 On/Off DCA Group 1-8 On/Off DCA Group 7,8 On/Off To Stereo On/Off To Stereo Point Mix Send Pre Point Mix Send Post Point Mix Send Follow Pan Vari Mix Send Follow Pan Fixed Mix Send 1-24 On/Off geschaltet sind. . Parameters that are copied when pairing is enabled INPUT/ST IN MIX MATRIX Mix Send 1-24 Pre/Post Mix Send 1-24 Level To Matrix On/Off To Matrix Point Selective Recall On Selective Recall Parameter Recall Safe On Recall Safe Parameter Mute Safe On Tracking On/Off Tracking Level Solo Safe On/Off Cue/Solo On/Off CH COPY CH SELECT GLOBAL PASTE CH SELECT OUTPUT ISOLATION PARAMETER . Parameters that are turned on when pairing is enabled INPUT/ST IN MIX MATRIX Attenuator Gang Gate Stereo Link Comp Stereo Link Delay Gang . Parameters that are not modified when pairing is enabled (reset if RESET BOTH is selected) INPUT/ST IN MIX MATRIX Phase To Stereo Pan Master Balance Attenuator Delay Time Surround LR Pan Surround FR Pan Mix Send 1-24 Pan To Matrix 1-8 Level To Matrix 1-8 Pan Input Pan Mode Surround Link On/Off Surround Link Pattern M-S Encode On/Off M-S Encode S-Gain . Parameters that are not modified when pairing is enabled (not reset even if RESET BOTH is selected) INPUT/ST IN MIX MATRIX Mix Type (VARI,FIX,SURR) TB On/Off OSC On/Off MONITOR DEFINE On/Off Anhange Informationen aufdem menu GlobaleFunktionenAusgangs-funktionenEingangs-funktionen PM5D/PM5D-RH V2 / DSP5D Bedienungsanleitung Referenzteil 367 MIDI-Datenformat MIDI-Datenformat t This section explains the format of the data that the PM5D is able to understand, send, and receive. In addition to the messages described here, you can use the MIDI REMOTE function or the MIDI EVENT settings of the SCENE function to transmit any type of command. 1 CHANNEL MESSAGE 1.1 NOTE OFF (8n) Reception These messages are echoed to MIDI OUT if [OTHER ECHO] is ON. They are received if [Rx CH] matches, and used to control effects. STATUS 1000nnnn 8n Note off message DATA 0nnnnnnn nn Note number 0vvvvvvv vv Velocity(ignored) 1.2 NOTE ON (9n) Reception These messages are echoed to MIDI OUT if [OTHER ECHO] is ON. They are received if [Rx CH] matches, and used to control effects. STATUS 1001nnnn 9n Note on message DATA 0nnnnnnn nn Note number 0vvvvvvv vv Velocity (1-127:on, 0:off) 1.3 CONTROL CHANGE (Bn) Two types of control change can be trans...
Эта инструкция также подходит к моделям:Музыкальные инструменты - DSP5D (21.87 mb)
Музыкальные инструменты - PM5D-RH (21.87 mb)