Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
30 Recording a CD by specifying track order ................................................ 31 DJ Effects Looping part of a CD ........................... 33 Flashing part of a CD ........................... 33 Sound Adjustment Adjusting the sound ............................ 34 Selecting the audio emphasis ............. 35 Adjusting the audio emphasis ............ 36 Making a personal audio emphasis file .................................................... 38 Other Features Singing along : Karaoke** .................. 39 Falling asleep to music ........................ 40 Waking up to music ............................. 41 Timer-recording radio programs ....... 42 Additional Information Precautions ............................................ 44 Troubleshooting ................................... 45 Specifications ........................................ 48 Index ....................................................... 50 * For MHC-F100/MHC-FR1 only ** For Singaporian model only EN Getting Started Getting Started Step 1: Hooking up the system Do the following procedure 1 to 5 to hook up your system using the supplied cords and accessories. To complete the setup, do steps 2 and 3 also. AM loop antenna FM antenna Right speaker Left speaker MHC-FR1 is used for illustration purpose. Connect the speakers. Connect the FM/AM antennas. 12 Connect the speaker cords to the Set up the AM loop antenna, then SPEAKER jacks of the same color. connect it. Keep the speaker cords away from the Extend the FM lead FM75 AM R + L + – antennas to prevent noise. AM loop antenna antenna horizontally. Insert only the stripped portion. Black (O)Red (O) 3 Set VOLTAGE SELECTOR to position of your local power line voltage (except for North American, and Australian models). VOLTAGE SELECTOR 110-120V 220-240V Connect the power cord to a wall 4 outlet. Demo mode appears in the display. If the plug on this unit does not fit your wall outlet, detach the supplied adapter from the plug (only for Singapore). Deactivate the demo mode by 5 pressing DISPLAY/DEMO when the system power is turned off. The demo mode is also deactivated when you set the time. Inserting two size AA (R6) batteries into the remote }} ] ] Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. Note on placement Be sure to place this system on a horizontal place. If the system is slanted, it may cause malfunction or damage the system. Step 2: Setting the time You must set the time before using the timer functions. 2,4 3,5 1 4 Turn the jog dial to set the minute. 5 Press ENTER. The clock starts working. Tips • If you’ve made a mistake, start over from step 1. • Setting the time deactivates the demo mode . If you want to display the demo mode, press DISPLAY/DEMO when the power is off. 1 Press t/CLOCK SET. The hour indication flashes. 2 Turn the jog dial to set the hour. The clock is on a 12-hour system. 3 Press ENTER. The minute indication flashes. 4 Press TUNER MEMORY. Step 3: Presetting radio stations For Singaporian model, you can preset up to 40 stations, 20 for FM, 10 for MW and 10 for SW. For North and South American and Australian models, you can preset up to 30 stations, 20 for FM and 10 for AM. POWER 3,5 6 1 24 1 Press TUNER/BAND repeatedly until the band you want appears in the display. Every time you press this button, the band changes as follows: Singaporian models: FM nMW nSW North and South American and Australian models: FM .AM n 2 Press TUNING MODE repeatedly until “AUTO” appears. 3 Turn the jog dial. The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a FM stereo program) appear. A preset number appears in the display. Preset number AUTO TUNED STEREO VOLUME MEMORY FM 1? 20 5 Turn the jog dial to select the desired preset number. 6 Press ENTER. The station is stored. 7 Repeat steps 1 to 6 to store other stations. To tune in a station with a weak signal Press TUNING MODE repeatedly until “MANUAL” appears in step 2, then turn the jog dial to tune in the station. To change the preset number Start over from step 1. To change the AM tuning interval The AM tuning interval is factory-preset to 10 kHz (9 kHz in some areas). To change the AM tuning interval, tune in any AM station first, then turn off the power. While holding down the ENTER button, turn the power back on. When you change the interval, AM preset stations will be erased. To reset the interval, repeat the same procedure. Tip The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. 20 20 TUNED STEREO AUTO FM 100.50 VOLUME MHz Inserting CDs You can insert up to 51 discs into this player. We recommend you use the PLUS ONE slot for CDs you will be inserting and removing ...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-F100 (580.88 kb)
Музыкальные центры - MHC-F50 (580.88 kb)