Оценок - 4, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
To skip to the next disc right away, press ENTER while playing the current disc. You cannot specify the next disc to play during ALL DISCS Shuffle Play. Note Even if you press .STOP or turn off the power during ALL DISCS Shuffle Play, the player remembers which discs/tracks were played and which were not. Therefore, if you want to start ALL DISCS Shuffle Play again from the beginning, be sure to repeat the procedure from Step 1. Programming the CD tracks –– Program Play You can arrange the order of the tracks and/ or discs to create three different programs and programs are stored automatically. A program can contain up to 32 “steps” — one “step” may contain a track or a whole disc. 147 2 CHECK CLEAR 53 1 Press FUNCTION repeatedly until “CD” appears. 2 Press PROGRAM repeatedly until the desired program number (PROGRAM 1, 2 or 3) appears. 3 Turn the jog dial until the desired disc number appears. 20 DISC PROGRAM VOLUME PLUS TITLE *DISC-20* Disc number continued 23 Programming the CD tracks (continued) 4 To program a whole disc, skip this step. Press /±until the desired track number appears. When the disc you select has a disc title (For MHC-F100/MHC-FR1 only), it appears and then switches to the following display. 20DISC PROGRAM 20 3 1 STEP VOLUME PLUS 1 Track number 5 Press ENTER. The track is programmed. The programmed track DISC PROGRAM STEP VOLUME PLUS 1 20 20 3 1 The programmed Playing order disc 6 To program other discs/tracks, do the following: To program Repeat Steps Other discs 3 and 5 Other tracks on the same disc 4 and 5 Other tracks on other discs 3 to 5 7 Press CD .. All the tracks play in the order you selected. To cancel Program Play Press CONTINUE. To You need to Check the Press CHECK repeatedly. program After the last track, “END” appears. Clear a specific Press CHECK until the track track or disc or disc you do not want appears, then press CLEAR. Clear from the Press CLEAR. Each time you last track or disc press the button, the last track or disc will be cleared. Add tracks or Follow the programming discs to the end procedure. of the program Clear a specific 1 Press PROGRAM repeatedly program until the program number you want to clear appears. 2 Hold down CLEAR until “ALL CLEAR” appears. Tips • When you press CD ., you can play the same program again. • If you replace discs, the programmed disc and track numbers remain until you erase them. So, the player plays only the existing disc and track numbers. However, the disc and track numbers that are not found in the player or on the disc are deleted from the program, and the rest of the program is played in the programmed order. The PLUS ONE slot comes to the loading Playing your favorite CD independently — Plus One Play When you insert a disc into the PLUS ONE slot, you can play the disc independently from other discs. When using this function, the player is automatically set to 1 DISC Continuous Play mode. 12 1 Open the front cover. 2 Press CD PLUS ONE (or PLUS ONE on the remote). The indicator on the CD PLUS ONE button lights up. position. PLUS ONE slot PLUS ONE 1 2 3 4 5 6 7 8 9 5049484746 45 3 Insert a disc into the PLUS ONE slot. 4 Close the front cover. The player starts playing the disc in the PLUS ONE slot. When the disc you select has a disc title (For MHC-F100/MHC-FR1 only) this is displayed along with “PLUS1”. P1 P1 1 0.35 VOLUME PLUS To cancel Plus One Play Press CD PLUS ONE (or PLUS ONE on the remote). The indicator on the CD PLUS ONE button goes off. The disc number in the display changes to 51 and you can play the disc as the 51st disc. continued P1 TITLE *DISC-PLUS1* VOLUME PLUS Playing Your Favorite CD Independently (continued) Tips • To play a disc already inserted into the PLUS ONE slot, press CD PLUS ONE while the front cover is closed. • You can start Shuffle Play during Plus One Play by pressing SHUFFLE before step 4. Notes • Plus One Play will be canceled if; — you turn the jog dial or press buttons to specify the other disc. — you press PROGRAM, MEMO SCAN or MEMO SEARCH. • The PLUS ONE slot comes to the loading position automatically if you open the front cover during Plus One Play. Do not put your hand inside the compartment nor change the disc before the rotary table comes to a complete stop. If you do, you may injure your hand or damage the disc. Labeling a CD (For MHC-F100/MHC-FR1 only) — Disc Memo You can label each disc using up to 12 characters. When you select a CD-TEXT disc, the first 12 characters of the disc title are stored as a disc memo. Whenever you load the labelled CD, the label (disc title) appears in the display. 1 2,4 LOOP/DELETE CLEAR 75 3 1 Press FUNCTION repeatedly until “CD” appears. 2 Turn the jog dial until the disc number to which you want to label appears. When you label a disc with the front cover closed, the disc number of the disc at the playing position appears. When you label a disc with the front cover open, the disc number at the loading position appears. 3 Press MEMO INPUT. The curs...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-F100 (583.08 kb)
Музыкальные центры - MHC-F50 (583.08 kb)