Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
/ : ; < = > ? @ [ \ ] ^ _ ` { }. 20 20 1 DISC S VOLUME PLUS 5 Press ±to select the character. The cursor shifts rightward and waits for the input of the next character. 1 DISC 20 TITLE VOLUME PLUS If you have made a mistake Press LOOP/DELETE. The character 1 space before the cursor disappears and the cursor flashes. Input the correct characters. 6 Repeat Steps 4 and 5 to input more characters. 7 Press ENTER to complete the labelling procedure. The disc name lights up in the display. 1 DISC 20 TITLE SONYHITS VOLUME PLUS Note • The disc title stores the number of the slot in which the CD was inserted. Rewrite the disc title when inserting a new CD into that slot. To erase a disc name 1 Follow Steps 2 and 3 in “Labeling a CD” on page 26 to select the disc name you want to erase. 2 Press CLEAR. The disc title disappears. 3 Press ENTER. To erase all titles of all discs While holding down LOOP/DELETE, press CLEAR. “ALL ERASE” appears in the display, and all disc titles will be erased. Tips • When you replace a disc with a CD-TEXT disc, the disc title of the CD-TEXT disc is restored automatically. The disc title for the CD-TEXT disc is no longer stored (disappears) each time the CD is removed. Note that you cannot change the disc title of the CD-TEXT disc. • You can label discs while the front cover is open. Repeat Steps 2 to 7 to label other discs. Locating a specific CD FUNCTION /± jog dial ENTER MEMO MEMO SCAN SEARCH Locating a disc by scanning each disc title — Memo Scan You can locate a disc you want to play quickly by scanning the disc title (see page 26) in the display and start playing. Note that you cannot use this function in the ALL DISCS Shuffle Play mode. 1 Press FUNCTION repeatedly until “CD” appears. 2 Press MEMO SCAN. “MEMO SCAN” appears, and the lamp on the ENTER button flashes. The disc title will appear in order. 3 Press ENTER when the disc title of the disc you want to play appears. The disc is set to the playing position, and the player starts playing. In Programme Play mode, the disc will be added to the end of the programme. Note If “NO ENTRY” appears, no disc has been labeled. Try the Memo Scan function again after labeling the discs. Locating a disc by searching a specific disc title — Memo Search You can search and locate a disc you want by inputting the first character used in the disc title (see page 26). 1 Press FUNCTION repeatedly until “CD” appears. 2 Press MEMO SEARCH ( or SEARCH on the remote). “MEMO SEARCH” appears and the lamp on the ENTER button flashes. 3 Press /±repeatedly to input the first character. 1 DISC 20 TITLE SONYHITS VOLUME PLUS 1 Each time you press /±, the characters appear in the following order. A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 If “[A] NOT FOUND” appears in the display while inputting the first character with the /±buttons, no disc has been labeled using the input character. Notes • When searching input characters, blanks and symbols before the first character in the Disc Memo are ignored. • When searching input characters, upper and lower cases cannot be differentiated. 4 Turn the jog dial to find the disc title you want. As you turn the jog dial, the Disc Memos starting with the input character appear in the display. 5 Press ENTER to select the disc. In Programme Play mode, the disc will be added to the end of the programme. To locate a disc on the remote Press the Bor bkey on the remote until the disc title in step 4 that you want appears. Skip step 5. To cancel Memo Search Press MEMO SEARCH again. Tips • If there is no more disc title starting with the input character in Step 4, the input character changes to the next one when you turn the jog dial. Playing highlights of the CD Some CD-TEXT discs have a feature to play only the highlights of the discs. HI-LIGHT =/+ /Press HI-LIGHT on the remote in the stop mode. The indicator on the abutton flashes while playing disc highlights. Tips • During play of disc highlights, you can return to normal play by pressing ./aon the remote. • During play of disc highlights, you can move to an earlier or later highlight song by pressing /±on the remote. • During play of disc highlights, you can use Repeat Play function. To repeat all the highlight songs, keep pressing REPEAT until “REPEAT” appears. To repeat only the current highlight song, keep pressing REPEAT until “REPEAT 1” appears. • If you press HI-LIGHT while selecting discs without this feature, “NO HIGHLIGHT” appears. The Tape Deck The Tape Deck Recording on a tape manually You can record from CD, tape, or radio as you like. For example, you can record just the songs you want or record from the middle of the tape. The recording level is adjusted automatically. 42DOLBY NR ./‚ 1 .STOP 35 1 Insert a blank tape into deck B. 2 Press FUNCTION repeatedly until the source you want to record (e.g., CD) appears. 3 Press REC .. Deck B stands by for recording. a(for front side) lights up. 4 Press DIRECTION repeatedly to select Ato rec...