Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
=/+ HI-LIGHT /Press HI-LIGHT on the remote in the stop mode. The indicator on the abutton flashes while playing disc highlights. Tips • During play of disc highlights, you can return to normal play by pressing aor ./aon the remote. • During play of disc highlights, you can move to an earlier or later highlight song by pressing/ ±on the remote. • During play of disc highlights, you can use Repeat Play function. To repeat all the highlight songs, keep pressing REPEAT until “REPEAT” appears. To repeat only the current highlight song, keep pressing REPEAT until “REPEAT 1” appears. • If you press HI-LIGHT while selecting discs without this feature, “NO HIGHLIGHT” appears in the display. The Tape Deck The Tape Deck Recording on a tape manually You can record from CD, tape, or radio as you like. For example, you can record just the songs you want or record from the middle of the tape. The recording level is adjusted automatically. 42DOLBY NR ./‚ 1 .STOP 35 1 Insert a blank tape into deck B. 2 Press FUNCTION repeatedly until the source you want to record (e.g., CD) appears. 3 Press REC .. Deck B stands by for recording. a(for front side) lights up. 4 Press DIRECTION repeatedly to select Ato record on one side. Select§(or RELAY) to record on both sides. 5 Press PAUSE .. Recording starts. 6 Start playing the source to be recorded. To Press Stop recording .STOP Pause recording PAUSE . Tips • If you want to record from the reverse side, press TAPE B »so that »(for reverse side) lights up. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR B” appears before step 5. • To skip tracks while recording from a tape, press aor .. Deck B stands by for recording, and you can skip tracks. To resume dubbing, press .. Note • Pressing FUNCTION with “TAPE B” selected starts silent recording (blank recording). Recording a CD by specifying track order You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of the tape. CONTINUE 92 .STOP 51 4CHECK 1086 3,6 1 Insert a blank tape into deck B. 2 Press FUNCTION repeatedly until “CD” appears. 3 Press PROGRAM repeatedly until the program number (PROGRAM 1, 2 or 3) appears. 4 Turn the jog dial until the disc number you want appears. 5 To program a whole disc, skip this step. Press /±until the desired track appears in the display. Total playing time Disc number (including selected track) VOLUME PLUS 1 1 8 2.43 Track number 6 Press ENTER or PROGRAM. The track is programmed. To program Other discs Other tracks on the same disc Other tracks on other discs Repeat Steps 4 and 6 5 and 6 4 to 6 7 To program additional tracks to be recorded, repeat steps 4 to 6. Skip step 4 to select tracks from the same disc. 8 Press CD SYNCHRO. Deck B stands by for recording and the CD player stands by for playback. · (for front side) lights up. 9 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 10 Press PAUSE .. Recording starts. continued Recording a CD by specifying track order (continued) To stop recording Press .STOP. To check the order Press CHECK repeatedly. After the last track, “END” appears. To cancel Program Edit Press CONTINUE. Tip If the track cuts off during recording, because the tape ended while recording on the A side, the track will automatically be recorded from the beginning on the B side. 32 DJ Effects DJ Effects Looping part of a CD — Loop With the loop function, you can repeat part of a CD during playback. This lets you create original recordings. Flashing part of a CD — Flash With the flash function, you can “flash” the CD sound during playback. This lets you create original recordings. jog dial LOOP/DELETE FLASHjog dial /Press and hold LOOP/DELETE during playback at the point you want to start the Loop function, and release to resume normal play. To adjust the loop length Turn the jog dial while holding LOOP/ DELETE (or press Bor bwhile holding LOOP/DELETE on the remote) to select different loop lengths (LOOP 1 – 20). /Press and hold FLASH during playback at the point you want to start the Flash function, and release to resume normal play. To adjust the flash length Turn the jog dial while holding FLASH to select different flash lengths (FLASH 1 – 20). To adjust the flash length on the remote, press Bor bwhile holding FLASH. (For MHC-F50 only) To use LOOP and FLASH together Press and hold both LOOP and FLASH at the same time. Notes • The loop and flash length cannot be adjusted during this operation. Adjust the loop and flash lengths independently beforehand if necessary. • To record the flash effect, use the analog (VIDEO/ MD OUT) connections or this unit’s tape deck. Sound Adjustment Notes Adjusting the sound You can reinforce the bass, create a more powerful sound, and listen with headphones. GROOVE PHONES DBFB To reinforce bass (DBFB) Press DBFB*. Each time you press the button, the...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-F50 (580.88 kb)
Музыкальные центры - MHC-FR1 (580.88 kb)