8) © Connecting the High Pressure Hose to the Pump (see pg. 9) Cómo conectar la manguera de alta presión a la bomba (ver pág. 9) ©Connecting the Garden Hose to the Pressure Washer (see pg. 9) Cómo conectar una manguera de jardín a la lavadora de presión (ver pág. 9) © Adding/Checking Engine Lubricant (see pg. 9) Abastecimiento y verificación de lubricante (ver pág. 9) 987000-455 1-27-09 (REV:00) If you have any questions, please call: 1-866-340-3912 Si tiene alguna pregunta le suplica

To keep your pump running at maximum efficiency, GASBOY recommends a periodic inspection at least twice a year. . Remove Water from Tank. After every fill-up, check your tanks for water. Water can accumulate in both underground and aboveground storage tanks due to condensation or defective fill openings that are not properly protected with watertight covers. Remove any water with a sump pump to forestall serious damage to equipment. Water, sediment, and other foreign matter that accumulates in t

©Connecting the water supply to the pressure washer (see page 10) Cómo conectar un suministro de agua a la lavadora de presión (ver página 10) ©Assemble Spray Wand (see page 11) Armado del tubo rociador (ver página 11) HU80215 pREssURE wAsHERs TOOLLEss AssEMBLY Guide (Note: Page references refer to the Operator’s Manual) guía de armado sin herramientas (nota: Todas las referencias a páginas se refieren al manual del operador) If you have any questions, please call: 1-866-340-3912 Si t

WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase. OPERATOR’S MANUAL GASOLINE PRESSURE WASHER HU80522 TABLE OF CONTENTS • Introduction ..................................................................................................................................................................... 2 • Important Safety Instructions .................................................................

Clogging of the nozzle causes the pump pressure to build up too high and cleaning is immediately required. 1. Clear blockage in nozzle by forcing stiff wire through center hole. . backflush the nozzle with water. Restart the pressure washer and depress the trigger on the spray gun. If the pressure is still too high, repeat above items 1- . 5.3 LUBRICATION The pressure washer is designed with a permanent lubrication system. Conventional oil check and oil changes are not necessary. NOTE: IN CASE O

10 1. Remove the tank caps (1-2) located on the back of the machine. (Fig. 10) 2. Fill the tanks with suitable cleaning solution. Use only approved pressure washer cleaners. Do not use bleach, chlorine, or any cleaners containing acids (Fig.10). NOTE: Tank #1 is removable and can be released by shifting left or right and then pulling out. 3. Turn dial (3) to choose the desired tank and increase/ decrease detergent flow(Fig.9). 4. Set the Click-N-CleanTM to the “Detergent Spray“ position. The det

©Wheel Assembly (see page 8) Conjunto de rueda (ver página 8) © Installing the Handle (see page 8) Instalación del mango (ver página 8) PUSH TO INSERT Adding Lubricant (see page 8) ^ Reabastecimiento de lubricación (ver página 8) OIL CAP / DIPSTICK ® Adding unleaded gasoline (see page 8) Abastecimiento de gasolina (ver página 8) HU80432 pREssURE wAsHER TOOLLEss AssEMBLY Guide (Note: Page references refer to the Operator’s Manual) guía de armado sin herramientas (nota: Todas las

Register your new HUSKYPOWERWASHER at the web site. For ease of reference, please record now the serial number and the date of purchase in the space provided below. Serial Number: ............................................................................... Date of Purchase: / /200 2 HUSKYPOWERWASHER Votre numero de modele est : Husky 1750C (1750 PSI) IMPORTANT Enregistrez votre numero de serie ci-dessous: Cher client, chere cliente, les renseignements fournis ci-dessous sont essentiels en cas

1) 1 Spray Gun 2 Click-N-CleanTM Variable Spray Lance 3 GFCI 4 Garden Hose Connector 5 High-Pressure Hose 6 Safety Lock 7 Motor and Pump in Case 8 Power Supply Cord with GFCI 9 ON/OFF Switch 10 Powerfoam. detergent nozzle 11 High Pressure Outlet 12 Shipping Plug 13 Retractable Handle 14 Spray gun storage location 15 Spray Bottle Storage Location 16 Lance storage location 17 Water Inlet 18 Hose / Power Cord Storage Location 19 Screen filter 20 Lance 1.0 DISE NO PIEZAS LISTA PIEZAS (Fig. 1) 1 Pist