CU: Cleaning Units. GPM multiplied by PSI. GPM x PSI = CU. 7- ENG A04032 PRESSURE WASHER PRESSURE WASHER TERMINOLOGY (cont'd) OPERATING FEATURES PRESSURE WASHER TERMINOLOGY (cont'd) OPERATING FEATURES Bypass Mode: Allows water to re-circulate within pump when the gun trigger is not pulled. Allowing the unit to run for more than two minutes without the gun trigger pulled could cause overheating and damage to the pump. Chemical Injection System: Mixes cleaners or cleaning solvents with the water t

Do not return this product to the retailer. • If you experience any problems and need assistance, please call us at our toll free number 1-866-422-4286, Monday through Saturday. • If repair or service part purchase is required, our many Authorized Warranty Service Centers are conveniently located and equipped to handle all in-warranty and out-ofwarranty service. • For the location of the nearest Authorized Warranty Service Center call 1-866-422-4286, 24 hours a day, 7 days a week or visit our we

Use only any kind of flammable solvent with CHEMICAL household detergents, cleaners and this product could result in serious BURN degreasers recommended for use in pressure washers. injury or death. • Wear protective clothing to protect eyes and skin from contact with sprayed materials. • Unsafe operation of your pressure • Do not use chlorine bleach or any washer could lead to serious injury other corrosive compound. RISK OF or death to you or others. • Become familiar with the operation UNSAFE

Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray. 9- ENG A00543 Changing Nozzles on Spray Wand DO NOT attempt to change nozzles while pressure washer is running. Turn engine off before changing nozzles. 1. Pull quick connect coupler back and insert nozzle. 2. Release quick connect coupler and twist nozzle to make sure it is secure in coupler. Risk Of Injury. Ensure nozzle is completely inserted in QC socket, an

0 Copyright © 2002 Delta Machinery INSTRUCTION MANUAL To learn more about DELTA MACHINERY visit our website at: For Parts, Service, Warranty or other Assistance, please call 1-866-422-4286 ESPANOL: PAGINA 15 FRANCAIS: PAGE 29 GENERAL INFORMATION . Congratulations! You have purchased a high quality product from America’s leading manufacturer of pressure washers. This pressure washer, when properly used and maintained, will provide trouble free service. Please read and follow these instructions fo

0 Copyright © 2005 Delta Machinery INSTRUCTION MANUAL To learn more about DELTA MACHINERY visit our website at: ESPANOL: PAGINA 19FRANCAIS: PAGE 37 For Parts, Service, Warranty or other Assistance, please call 1-866-422-4286 SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please r

Reassemble the nozzle to the wand. Tighten securely to prevent leaks. 10. Reconnect wand to gun and turn on water supply. 11. Start pressure washer and place wand into high pressure setting to test. HOW TO CLEAN THE WATER INLET FILTER This screen filter should be checked periodically and cleaned if necessary. 1. Remove filter by grasping end and removing it from water inlet of pump as shown. 2. Clean filter by flushing it with water on both sides. 3. Re-insert filter into water inlet of pump. NO

• Injuries can result if system pressure is not • To relieve system pressure, shut off engine, reduced before attempting maintenance or turn off water supply, and pull gun trigger disassembly. until water stops flowing. • Use only hoses and accessories rated for pressure higher than your pressure washer's p.s.i. HAZARD RISK OF CHEMICAL BURN WHAT CAN HAPPEN HOW TO PREVENT IT • Use of acids, toxic or corrosive chemicals, • Do not use acids, gasoline, kerosene, or poisons, insecticides, or any kind

Never hold onto the hose or fittings during operation. • Do not allow hose to contact muffler. INJECTION AS A SIMPLE CUT! See a • Never attach or remove wand or hose physician immediately! fittings while system is pressurized. • Injuries can result if system pressure is not • To relieve system pressure, shut off engine, reduced before attempting maintenance or turn off water supply, and pull gun trigger disassembly. until water stops flowing. • Use only hoses and accessories rated for pressure h

D28569 8- ENG OPERATING INSTRUCTIONS READ THIS OPERATION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Engine High Pressure Hose Spray Gun Quick Connect Spray Wand Chemical Hose High Pressure Pump BASIC ELEMENTS OF A PRESSURE WASHER High Pressure Pump: Increases the pressure of the water supply. Engine: Drives the high pressure pump.