When not in use, before servicing and when changing accessories such as blades, bits and cutters. 13. Remove adjusting keys and wrenches. Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on. 14. Avoid unintentional starting. Do not carry a plugged in tool with a finger on the switch trigger. Ensure switch is off when plugging in. 15. Use outdoor extension leads. When tool is used outdoors, use only extension cords intended for outdoor

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices that may cause property damage. NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment. SAVE THESE INSTRUCTIONS Page 4 SPECIFICATIONS Weight - (without fuel) ...........................................................................................................................

Properly cared for, it will give you years of rugged, trouble-free performance. CAUTION: Carefully read through this entire operator's manual before using your new cordless grass shear. Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your grass shear properly and only for what it is intended, you will enjoy years of safe, reliable service. Thank you again for buying Homelite products. SAVE THIS MANUAL FOR FUTURE REFERENCE TABLE OF CONTENTS Rules for Safe O

If damaged, have replaced immediately by a qualified serviceman. • Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. • Do not disassemble charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. • To reduce risk of electric shock, unplug the charger from outlet before attempting any maintenance or cleaning. Turning off

If you notice a power loss with your petrol-powered tool, a qualified service technician will need to remove these deposits to restore performance. SPARK ARRESTER The spark arrester must be cleaned or replaced every 25 hours or yearly to ensure proper performance of your product. Spark arresters may be in different locations depending on the model purchased. Please contact your nearest service dealer for the location of the spark arrester for your model. Cleaning Instructions: ¦ ¦¦¦¦¦Remove the

Box)............03959 04 (.095" Dia.) STRINGHEAD-Complete-Pro-Cut™ Fixed Line Head.....DA 09364 (.105" Dia.) REPLACEMENT DuraLine™ (.105" Dia.)..............................D 09365 (Cartridges for Pro-Cut™ Fixed Line Head) SAFETY GOGGLES................................................................A 06933 DUST MASK.........................................................................UP 03036 COMFORT STRAP..............................................................UP 00108 FOR USE

25-35 ........... 2.8-4.0 4 .... ... 50-60 ........... 5.6-6.8 8 .... ... 5-10 ............6-1.1 10 ... 30-40 ........... 3.4-4.5 Warranty Flat Rate Job Description Time/Hr. FB18.. .. Muffler-Replace................... ........3 FF42 . ..Air Filter Assy...................... ........2 8 03/08/2001 03/08/2001 SHAFT - SPOOL & STRING - GRASS DEFLECTOR EasyTrim™ ....... ........(UT20693, UT20705) ST2517 CR (UT20726R, UT20823) 5 Item No. In/Lbs Torque Specs Nm Required Loctite 2

PS05001 Non-Clutch EasyTrim™ ........... .....(UT20693) d825cdp................. .....(UT20705) d825cde................. .....(UT20695, UT20713) d825sd ................... (UT20700, UT20701, UT20709, UT20729) IGNITION - ROTOR - STARTER 18 No. Part No. Description Qty. C • A 07174 IGNITION KIT 1 1 UP 03868 TERMINAL & COVER 1 2 UP 03896 SCREW-Taptite (8-32 X 1") 3 _UP 03883 SPARK PLUG 1 4 UP 04690 LEAD-Electrical 1 5 • UP 03009 ROTOR KIT 1 6 _UP 03906 WASHER-Flat 1 7 UP 04271 CO