Оценок - 2, средний балл: 5 ( )

Производитель: Kenwood Размер: 796.78 kb Название файла: Язык инструкции:

OAfter completion of CCRS recording , be sure to cancel the CCRS and ensure that the CCRS indicator has gone off. NotesNotes 1. If the CCRS key is pressed during CD playback, playback stops and CCRS operation begins. 2 .If the remaining amount of tape is small, CCRS may not function correctly or CCRS operation may be canceled in mid-operation. 3 .Once the CCRS recording level has been set, the recording balance and recording level cannot be adjusted while the CCRS operation is being carried out. 4 .The CCRS function sets the peak level for the entire CD in approx. 20~200 seconds. On very rare occasions, however, the function may not be able to set the optimum recording level. If this occurs, carry out recording manually referring to the “Normal recording” section. ^ 5. The CCRS recording level setting is canceled when the open/close key of the CD player is pressed or when the power is switched OFF. 6. With CD players equipped with the EDIT function, it is possible to make recordings in which the last songs on sides A and B are not cut off in the middle and in which the recording capacity of the tape is used to the fullest extent. (Set the REV.MODE key of the deck to “[”.) Timer operations CT-2050/203/KXF-W6010/W4010 (En/M) 23 Timer playback of tape Preparation This unit incorporates a built-in timer standby function. By using an audio timer optionally available in the market, wake-up playback and unattended recording of tape can be started at any time of the day. Connect the power cords of the components directry or indirectly to the timer so that their powers can be turned on via the timer. The timer setup operation varies depending on the timer. Also read carefully the instruction manual of your audio timer. Audio timer To AC outlet Tuner (CT-2050/203/KXF-W6010/W4010) Amplifier1Set the power switches of the compo- nents to ON. 2Set the input selector of the amplifier to TAPE. 3Make "Playback (recording) preparation". 0(If relay playback is required, insert tapes in both decks A and B.) 1 1 Start playback. REVERSE 2FORWARD 3STOP 7 2 2 Adjust the volume of the amplifier. 3Rewind the tape(s) to the start position. A 1 4 4 Set the TIMER switch to PLAY. TIMER REC OFF PLAY 5 5 Set the timer. OSet the timer so that the tape starts at the desired time of the day. OWhen the set time comes, tape playback starts automatically. ORead carefully the instruction manual of your audio timer. NotesNotes 1. When connecting the KENWOOD equipment (amplifier, CD player) and the system, remove the disc from the CD player. 2. If relay playback is required, set to “[ [[[[[” or ““ OOOOO”. 3. If tapes are inserted in both decks A and B, timer playback starts with deck B. 4. Switch on the power to the cassette deck. (The timer will not operate if it is switched off.) Timer operations CT-2050/203/KXF-W6010/W4010 (En/M) Preparation 1Set the power switches of the compo- nents to ON. 2Set the input selector of the amplifier to TUNER. 3Receive the desired radio station with the tuner. 4Make "Playback (recording) preparation". 0(If relay recording is required, insert tapes in both decks A and B.) 5(Remove the disc from the CD player.) CT-2050/KXF-W6010 only : Keys and control used in the operations described on this page. Timer recording of tuner broadcast (CT-203/KXF-W4010; Deck B only) "MPX" lights up. 1 1 Press the MPX FILTER key to ON.(when recording FM broadcasts only) ORefer to the "How to use the MPX FILTER key". & OTo cancel, press the MPX FILTER key again. MPX FILTER 2 2 Adjust the recording level. 8PAUSE ¦REC/ARM 1Set the record-pause mode. 2Adjust the recording balance and recording level. CT-2050/KXF-W6010 CT-203/KXF-W4010 OWhile pressing the PAUSE (8) key, press the REC/ARM (¦) key. ORefer to the "How to record". ^ 3 3 Set the amplifier volume to the minimum position. 4 4 Set the TIMER switch to REC. TIMER REC OFF PLAY 5 5 Set the timer. OSet the desired time when the recording is to be started. OWhen the set time comes, the powers of the related components are turned ON and recording starts. ORecording stops when the end of side to be recorded is reached. ORead carefully the instruction manual of your audio timer. Timer relay recording (CT-2050/KXF-W6010 only) 1Press the MPX FILTER key to ON. & 2Complete the procedure 1, 2, 3 of "Relay recording". ( 3Complete the procedure 3, 4, 5 of "Timer recording of tuner broadcast". ORelay recording is not set, deck B will record. NotesNotes 1. To ensure that the cassette deck’s automatic shut off switch operates before the power is shut off, set the timer so that it operates for a little longer than the playing time of the tape. 2. Switch on the power to the cassette deck. (The timer will not operate if it is switched off.) In case of difficulty CT-2050/203/KXF-W6010/W4010 (En/M) What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or s...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: