Войти:
Оценок - 3, средний балл: 4.7 ( )

Инструкция по эксплуатации Kenwood, модель KXF-W6010

Производитель: Kenwood
Размер: 796.78 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


2Select the Dolby NR mode. 237 To Stop relay playback OBe sure to remove tape slack before insertion. OBe sure to close the cassette holder securely by pushing it. Each press switches the indication. 1 “[” : Relay playback of two sides of tapes in decks A and B is repeated. 2 “O” : Relay playback is not available with this setting. 3 “O” : Relay playback of only one side of tapes in decks A and B is repeated. Each press switches the indication. 1 DOLBY NR “OFF” (extinguished): Dolby NR is not used. 2 DOLBY NR “B”: Noise reduction of the ordinary type. 3 DOLBY NR “C”: Noise reduction with higher performance. OSelect the Dolby NR mode according to the tape recording status. OTapes are played in the directions indicated by their respective indicators on the display. OThe playback starts with the deck the play key of which is pressed. Press stop (7) key of the deck that is playing. 237 CT-2050/203/KXF-W6010/W4010 (En/M) .............................................................................................................................. ........................................................................................................................................................................ Convenient music search (DPSS) CT-2050/203/KXF-W6010/W4010 (En/M) The DPSS (Direct Program Search System) enables the following convenient operations according to the instructions of the operation keys (these operation are however not available on both decks simultaneously). The DPSS functions are based on14 the detection of non-recorded spaces of 4 seconds or more between tunes. 1. Skip play : By specifying a tune located several tunes beyond (or behind) the tune being played, skips tunes between the current tune and the selected tune and starts playback from the beginning of the selected tune. Up to 16 tunes can be skipped in Skip Search. 2. Rewind & Play : Rewinds the tape to the beginning and starts playback from there. 3. Single-tune repeated playback : One single tune is played back repeatedly up to 16 times. 4. Dash & Play : If a non-recorded space of more than 10 seconds is detected during playback, that space will be skipped by fast forward tape winding. Tune being played. Space (non-recorded).Space (non-recorded). ­ ­ ­ ­ ­­­­­ Tape transport direction \. : Keys and control used in the operations described on this page. Skip play operation The example below shows the case in which the direction indicated by the tape transport direction indicator is 3. If the direction indicated by the tape direction indicator is 2, always press the keys for the opposite directions to those shown in the illustrations below. To play the tune located 4 tunes behind To play a tune located immediately after the tune being played To play the tune being played from the be- ginning To play a tune located 4 tunes beyond Press 4 times during the playback. Press once during the playback. Press 5 times during the playback. Press once during the playback. A 1A 1 A 1A 1 DPSS will not function properly with the following types of tapes. OTapes containing spaces of 4 seconds or more, such as conversations and speeches. OTape containing extremely low levels or non-recorded spaces in the middle of tunes, such as classical music. OTapes containing recording of large noise between tunes. OTapes containing spaces of less than 4 seconds between tunes. OTapes recorded with low recording level. OTapes recorded using Cross-fade recording. NotesNotes Convenient music search (DPSS) CT-2050/203/KXF-W6010/W4010 (En/M) Rewind & Play operation This operation cannot be performed with the remote control (of the separately sold amplifier). Direction of tape direction indicator: 3. Press simultaneously. Press simultaneously. A 1237 A 1237Direction of tape direction indicator: 2. OTape returns to the beginning of the tape side being played and playback restarts from there. OPress the stop (7) key to stop playback and cancel this operation. Single-tune repeated playback operation When direction of tape direction indica- tor is 3: 2371Play the tune to be repeated. 2Press the play key of the same direction as the current tape transport direction. ONormal playback resumes after repeating the same tune for 16 times. OPress the stop (7) key to stop playback and cancel this operation. Dash & Play operation The Dash & Play skips long non-recorded spaces automatically as the tape is played. This operation cannot be performed with the remote control (of the separately sold amplifier). 1 1 Determine the playback mode (conditions). Each press switches the indication. 1 “[” : Two sides are played only once, after which playback stops. REV.MODE . 2 “O”: Two sides are repeated 8 times, after which playback stops. 3 “O”: One side is repeated 8 times, after which playback stops. OIn case the REV.MODE key is set to “[” and tapes are inserted in both of the decks, when a deck finishes Dash & Play, the other deck starts Dash & Play for 16 times, after which it stops....

Эта инструкция также подходит к моделям:
Кассетные деки - CT-203 (796.78 kb)
Кассетные деки - CT-2050 (796.78 kb)
Кассетные деки - KXF-W4010 (796.78 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории