(2.4 m) • (1) Allen Wrench (5/16”) • (1) Allen Wrench (1/4”) > (1) Carpenter’s Level » (1) Phillips-Head Screwdriver » (2 each) 9/16” Wrenches and/or Socket Wrenches and Sockets (Deep-Well Sockets 9/16" are Recommended). TO ADJUST TENSION Remove the rim cover from the rim and make adjustments as shown. (9/16”) TO LEVEL RIM (1/4”) INSTALL NET A. Remove nylon net-holder from the rim. B. Reinstall while inserting all net loops into slots along ring as shown. ID# M415221 01/06 2

Line up holes as shown and tap together. NOTE: Make sure holes remain lined up. Secure poles as shown. ODC (° D 10 10 d 9 13 Attach legs to ple assembly using bolts (8) and nuts (13). Attach rim and board bracket to backboard using bolts (11) and nuts (20). 11 Slide backboard assembly over top pole as shown fully tightening bolts (11) and nuts (20). Secure board by inserting screws (6) as shown. 1 P/N 211745 12/04 2 Toll-Free Customer Service Number for U.S. : 1-800-558-5234 htt

Los objetos se pueden enredar en la red. · · · · · · 6 ID# M780004 08/05 Des questions ou des pieces manquantes ? IMPORTANT! Remove all contents from boxes. Be sure to check inside pole sections, hardware and additional parts are packed inside. Rufen Sie die GEBUHRENFREIE Telefonnummer (in den USA und Kanada) auf der Vorderseite an! IMPORTANT! Videz entierement les boites. .Tiene preguntas o le faltan piezas? Veillez a verifier l'interieur des sections de poteau. La quincaillerie et des pieces s

(2.4 m) (1) Allen Wrench (5/16") > (1) Carpenter’s Level » (1) Phillips-Head Screwdriver » (2 each) 9/16" Wrenches and/or Socket Wrenches and Sockets (Deep-Well Sockets 9/16" are Recommended). TO ADJUST TENSION Remove the rim cover from the rim and make adjustments as shown. A. Remove nylon net-holder from the rim. B. Reinstall while inserting all net loops into slots along ring as shown. ID# M4115221 04/05 2

(2.4 m) (1) Allen Wrench (7/16”) (1) Allen Wrench (1/4”) > (1) Carpenter’s Level > (1) Phillips-Head Screwdriver • (2 each) 9/16” Wrenches and/or Socket Wrenches and Sockets (Deep-Well Sockets 9/16" are Recommended). TO ADJUST TENSION Remove the rim cover from the rim and make adjustments as shown. A. Remove nylon net-holder from the rim. B. Reinstall while inserting all net loops into slots along ring as shown. ID# M4115231 04/05 2

9/16" 3/4" 9/16" 3/4" A. Remove the rim cover from the rim. B. Make adjustments as shown below. Tightening the nut which preloads the spring increases the rim’s resistance to movement - the more the preload, the more force will be required to move the rim downward. A. Retirez l’emballage du panneau. B. Procedez aux ajustements comme indique ci-dessous. En serrant le boulon de precharge du ressort, la resistance au mouvement du panneau augmente – plus il y a de precharge, plus il faudra de force

Be sure to check inside pole sections, hardware and additional parts are packed inside. IMPORTANT! Videz entierement les boites. Veillez a verifier l'interieur des sections de poteau. La quincaillerie et des pieces supplementaires sont emballees a l'interieur. Rufen Sie die GEBUHRENFREIE Telefonnummer (in den USA und Kanada) auf der Vorderseite an! WICHTIG! Die Kartons vollstandig auspacken. Den Hohlraum in den Stangenteilen inspizieren. Dort sind Befestigungs- und andere Kleinteile verpackt. .T

WARNING 11. 16 4 13 9 4 7 4 10 7 4 10 7 4 16 4 7 4 9 16 4 16 TWO PERSON MINIMUM REQUIRED FOR THIS PROCEDURE. NOT FOLLOWING RECOMMENDATION MAY RESULT IN SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE. WARNING IMPORTANT! Do not over tighten. 14 14 14 1514 13 14 Cut foam stripping (14) to sizes shown and attach to flat side of H-frame (13) as shown. Then secure H-frame to support arms (9 & 10). NOTE: Install H-Frame (13) with foam striping toward backboard. Do this strip last. 11. 16 4 13 9 4 7 4 10

• Check system before each use for proper ballast, loose hardware, excessive wear and signs of corrosion and repair before use. • Check system before each use for instability. • Never play on damaged equipment. • Keep pole top covered with cap at all times. • See instruction manual for proper installation. In the U.S.:1-800-558-5234 and Canada: 1-800-284-8339 201240 2/99 WARNING 37 Crank Height Indicator Hook 201248 2/99 TO ADJUST BACKBOARD: Position looped end of crank onto hook as shown. Rotat