2. This warranty does not apply to any product which has been subject to abuse, neglect, or accident, or which has had the serial number altered or removed, or which has been connected, installed, adjusted, or repaired other than in accordance with instructions furnished by Lathem. 3. This warranty does not cover dealer labor cost for removing and reinstalling the machine for repair, or any expendable parts that are readily replaced due to normal use. 4. The sole responsibility of Lathem under t

.......................... 9 Cable Wiring Diagrams 10 RS-232 (Computer to PC100) ..................................................................................................... .......... 10 RS-485 Multi-Drop.............................................................................................................. .................. 11 Junction Box to Terminal ....................................................................................................... ............... 12 Troub

No warranties are given with respect to products purchased other than from Lathem or an authorized Lathem reseller and any such products are purchased "as is, with all faults." In no event will Lathem be liable for any direct, indirect, special, incidental or consequential damages arising out of or in connection with the delivery, use or inability to use, or performance of this product. In the event any limited remedy given herein shall be deemed to have failed of its essential purpose, Lathem's

Turn the PayClock so its back faces you 2. Plug the power cord (AC adapter) into the PayClock, keeping the cord slack 3. Plug the other end of the power cord into a wall outlet 4. Connect the jack end of the serial cable to the PC100 5. Connect the other end of the serial cable to an open COM port on your computer. All serial ports are raised pin (male) connectors Connecting Terminals via RS-485 When selecting your installation method, the type of wire that will be used is important. Silver Sati

See the Cable Wiring Diagrams for detailed connection points For more details or how to supply see the SWIFT-485+ User’s 6 PC100 Terminal User’s Guide CHAPTER 4 Using the PC100 The base model PC100 clock allows only an RS-232 connection. The PC100-R model allows RS-232 or RS-485 connections; RS-485 connections require the Terminal Manager software add-on. The PC100 has a magnetic stripe badge reader. The magnetic stripe should be on the left side of the badge when swiping. To swipe the badge, in

Ports: RS-232 cable at speeds of 1200, 2400, 4800 and 9600 For PC100-R: RS-485 Cat. 3 or Cat. 5 cable (suggested) of 2400, 4800 and 9600 baud. Up to 4000 feet Certifications: UL; C-UL; FCC Part-15 Class-B; Canada ICES-003 Class-B; CE-CENELEC EN55022; CENELEC 9 PC100 Terminal User’s Guide APPENDIX A Cable Wiring Diagrams RS-232 (Computer to PC100) 10 PC100 Terminal User’s Guide RS-485 Multi-Drop PayClock PayClock PayClock See Fig. A Be sure to maintain polarity through out the chain Fig. A – Junc

(This is the zero minute.) 2. Set the Hour Wheel Figure 4.2 to the current Hour. 3. Rotate the Clock Face Setting Wheel Figure 4.3 to set the hands to match the time set on the wheels. 4. Rotate the Main Setting Wheel to advance both the Clock Face and Print Wheels together. Rotate until you pass the actual time by one minute (each “click” indicates one minute.) For example, at 10:05, rotate 5 times = 5 clicks = 5 minutes past ten o’clock. 5. Hold the corner of the Clock Face and release the Rel

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This Transceiver must not be co-located or operating in conjunction with any other antenna or Transceiver. Disclaimer The information within this document has been carefully checked and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Lathem T

You must see your network administrator prior to beginning the installation for this information. Mount the Terminal The PC3500TX is designed to operate indoors. You should use the terminal where the temperature is between 32°-110° F and humidity is less than 95%. You should choose a place where the terminal cannot vibrate. Exposure to outdoor conditions such as rain or snow voids the warranty and can damage the terminal. 4 - PC3500TX Terminal Installation & User’s Guide To install the mounting

This Class B digital apparatus complies with Canadian ICES-003. Cet appariel numerique de la classe B est conforme a la norme NMB-003 du Canada. OPERATION, INSTALLATION AND MAINTENANCE MANUAL “REMOTE BELL RINGER” LATHEM TIME CORP Doc #USG0027A “LTR8-512” and “MasterLink” are Registered Trademarks of Lathem Time Corp., Atlanta, GA, USA ©2003 LATHEM TIME CORP Welcome to the LTR-RBR (Remote Bell Ringer) Lathem’s LTR8-512 Master Controller for Clocks and Bells is capable of storing up to eight (8) S