Оценок - 4, средний балл: 4.8
(
)
)
|
Фрагмент инструкции
See the Cable Wiring Diagrams for detailed connection points For more details or how to supply see the SWIFT-485+ User’s 6 PC100 Terminal User’s Guide CHAPTER 4 Using the PC100 The base model PC100 clock allows only an RS-232 connection. The PC100-R model allows RS-232 or RS-485 connections; RS-485 connections require the Terminal Manager software add-on. The PC100 has a magnetic stripe badge reader. The magnetic stripe should be on the left side of the badge when swiping. To swipe the badge, insert it at the top of the reader, and then pull it down with a continuous and smooth motion. Special Badges Three supervisor badges are available for your certain tasks at the clock. Badge #251 – View Clock Status This badge displays a clock clock setup: VER 1.05 | CLK READYID# 049 | BAUD 9600 MEM 10% | TIME 12HR | ON 7 PC100 Terminal User’s Guide ¦ PC100 version number ¦ Terminal ID# (ID=49) ¦ Percent full memory (each time you poll the clock, this resets to 0%) ¦ Clock ready status (READY/LOAD LIST) ¦ Baud Rate ¦ 12-Hour or 24-Hour time display format ¦ Daylight Savings Time (DST) ON/OFF After a few seconds, the display returns to normal. Badge #253 – Set Baud Rate Swipe this badge to change the baud rate – the default is 9600. You may need to reduce the baud rate if you have problems communicating with the clock. ENTER BAUD 1ST DIGIT These problems can result from a noisy 1200 2400 4800 9600 environment or a long serial cable (usually more than 50 feet). To change the baud rate, swipe the Set Baud Rate badge, prompted, swipe employee badge #1, 2, 4 or 9 to indicate 1200, 2400, 4800 or 9600 baud. NOTE: RS-485 communications do not support 1200 baud Badge #254 – Setup Terminal Swipe this badge to change prompted, swipe an employee badge that matches your desired ID. have more than one clock, make sure each one has 8 PC100 Terminal User’s Guide Specifications Casing: 6.375”W x 7.375”H x 1.5”D flame-retardant ABS plastic. 19 oz. Includes key lock and wall mounting bracket Power: 6VDC/ 300 mA wall-mount power supply. UL approved Display: 4 lines x 20 characters liquid crystal with large block digits Swipe “Beeper” signals good or bad badge reading and low memory. Status: Green and red LED’s show good or bad badge swipes Badge Reader: Mag-Stripe Track 2 reads standard “credit card” format Badges: Accepts badges #1-250. Badge metallic stripes are even-parity Memory: Stores about 1,500 registrations. Protected by internal 10-year lithium battery. This product’s lithium battery contains Perchlorate Material – special handling may apply. Please go to web site for information about proper methods of disposal in California. Ports: RS-232 cable at speeds of 1200, 2400, 4800 and 9600 For PC100-R: RS-485 Cat. 3 or Cat. 5 cable (suggested) of 2400, 4800 and 9600 baud. Up to 4000 feet Certifications: UL; C-UL; FCC Part-15 Class-B; Canada ICES-003 Class-B; CE-CENELEC EN55022; CENELEC 9 PC100 Terminal User’s Guide APPENDIX A Cabl...
Эта инструкция также подходит к моделям:Регистраторы времени - PC2000 (105.29 kb)
Регистраторы времени - PC100-R (105.29 kb)
Регистраторы времени - PC2500 (105.29 kb)
Регистраторы времени - PC3500 (105.29 kb)