Observe polarity. 2) Press and hold the B & K and MUTE buttons simultaneously for two seconds. The LED will light up solid red and stay illuminated. 3) Firmly press the desired B & K three digit code set. Always use three digits (i.e. 0-1-1 default for Zone A) 4) Press the B & K button again to confirm setup. The red LED will blink three times when the IR MZ-128 Default Factory Code-Set is: 0-0-0 Whole House Control CODE SET 000-128 MZ-128 BUTTON B & K IR FUNCTION MZ-128 BUTTON B & K IR

GUIDE TO SIMPLE HOME THEATER OPERATION © 2002 B & K Components Ltd. All rights reserved. B & K Components, Ltd. . 2100 Old Union Road . Buffalo, New York 14227 1.800.543.5252 In NY: 716.656.0026 Fax: 716.656.1291 E-mail: info@bkcomp.com . On the web: Table of Contents Finding the MAIN Menu 1 Turn On the System 2 Using the MAIN Menu 3 Select a New ACTIVITY 3 Select a DEVICE Only 4 Controlling the Volume 5 Operating Any Device 5 Using FAV - Favorites 7 Backlighting 9 Changing CONTRAST 9 Batteries

Complete specifications for the Model 4070A are given in Chapter 9. 1 BK Precision 4070A User Manual Rev.2.2 1.1 Description Figure 1.1-1: 4070A front panel The Model 4070A is a versatile signal source capable of generating a variety of waveforms, including CW and wideband sweeps from D.C. to 21.5 MHz in steps of .01 Hz. The signals are generated using direct digital waveform synthesis (DDS) techniques for high accuracy and precision. AM, FM, PM, and FSK modulation types are available. A high sp

ALL RIGHTS RESERVED PRODUCT AND DOCUMENTATION NOTICE: B+K Precision reserves the right to change this product and its documentation without prior notice. Information furnished by B+K Precision is believed to be accurate and reliable. However, B+K Precision assumes no responsibility for its use, nor for any infringement of patents, or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under the patent rights of B+K Precision. PRINTED IN

(ENTER)SEL or ENTER2 move to AM Tuner ChannelsU (UP) or U (DOWN)­(PAUSE) or .(STOP)1 ActionFrom Front PanelFrom Remote This set up allows you to preset up to 20 FM tuner channels for fast access. This is for your convenience only and need not be performed unless you wish to. Refer to Manual / Seek tuning for AM Tuner above Stereo/Mono -Programming a channel to Stereo will play the channel in stereo if it is broadcast in stereo or in mono otherwise. Programming a channel to Mono will force the ch

Check that you are in USER PREFERENCE SETUP and that the remote is in AUDIO mode. EDIT PRESET OPTIONS Full Edit Preset No )8//(',712 USER PREFERENCE SETUP 1 Edit Preset Options2 Edit Source Names 3 Display options4 Surround Modes move to new line select menu pageprevious page (',7237,216­ . SEL MENU adjust parameterprevious page ¬® MENU return to USER PREFERENCE SETUP MENUMENU4 choose optionVOLUME KNOB.(REW) or.(FF)3 activate EDIT PRESET OPTIONS. (ENTER)SEL or ENTER2 move to Edit Preset OptionsU

You can’t directly record Dolby Digital onto mini disc or digital compact cassette since these devices add their own compression, which is incompatible with the Dolby Digital compression. Not all Dolby Digital recordings will include all five channels, and, in fact, it is common on DVDs to have two channel Dolby Digital with or without Pro Logic processing. Sound will normally come from all seven speakers in your system, but your receiver can produce sound in one (mono) to seven channels (see “A

Replace only with same type and value. Note: the voltage label located on the AC fuse holder cover plate. 2. AC input receptacle - For attaching the supplied AC power cord to the receiver. 3. IEEE 1394 input (optional) For future interface applications. 4. Control outs - Outputs that allow you to remotely control external devices. (See “Making The Connection“). 5. IR in - Accepts input from external IR receptors. Connect an IR repeater (“home run”) to IR IN for controlling the receiver. This met

• If you might expand your audio/video system later, keep these ideas in mind as you plan current cable runs. • To provide the best tuner reception, make sure the antenna is at least several feet away from the receiver and any other equipment that may produce high frequency interference such as Personal computers, CD players, halogen lamps, etc. Take a look at the back panel of the receiver. You will notice that the RCA-type audio input and output connectors are identified by colors, red for rig

Low Battery Message 3 Using Your Remote Control 4 A. Function Table Reference 4 Function Tables 5 B. Preprogrammed Set-Up 8 Three Digit Code Method 8 Auto Search Method 10 Recalling the Set-Up Code 11 C. Learning Set-Up 12 Learning New Functions on the Main Keyboard 12 Learning New Functions on the Device Buttons 14 Erasing Learned Functions 15 Erasing Individual Buttons 15 Erasing All Buttons in One Device Mode 16 Erasing All Buttons in All Device Modes 16 D. Operation 17 Device Buttons 17 Main