To do this, hold down the central button or wheel button and click the right hand button. Hold down centre button ( ). Press and release left hand button ( ) to launch the on-screen menu When the menu is first called up, a set of default names will be listed. You will probably want to change these names to suit your computers (see section 3.5). When you launch the on-screen menu you will see a screen similar to that shown below. LINDY CPU Switch Dual Multi-Platform Installation and Use Page 47 T

32354 (16 ports) © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (October 2003) About this manual LINDY CPU Switch Dual MP - Installation and Use First edition (October 2003) (c) LINDY 2003. Part No. LY0051/1 All rights reserved. Whilst every precaution has been taken in the preparation of this manual, LINDY assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. We reserve the

1 Features................................................................................................................. 1 Technical Specifications...................................................................................... 2 System Requirements..........................................................................................2 Package Checklist ................................................................................................ 3 Installation and Connections.....

5.6.2 Run the D:\Driver\USB-SERIAL ADAPTER\WINDOWS\ Uninstall.exe from the software CD-ROM. 5.6.3 Click “Ok” to continue. 5.6.4 After remove the driver, you have to reboot the PC English Manual 5.7 Windows® XP Driver Installation Follow the steps below to install Windows® XP driver: 5.7.1 Power on your computer and make sure that the USB port is enabled and working properly. 5.7.2 Insert the driver of USB-Serial adapter into CD-ROM drive and plug in the USB-Serial adapter into the USB port, the

42856 & 42857 © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - SECOND EDITION (NOV 2002) CONTENT For detailed description of the DRIVER INSTALLATION with screen shots included please refer to the ENGLISH manual. The description in the german, french and italian manuals are as short guide only. All brand names and product names used in this document are trademarks, or registered trademarks of their respective holders. English Manual 1. Overview Congratulations on your purchase of the USB-Ser

Software version: 2.0 – Illuminated LCD display for plain text displays – 4 keys on the front of the device – Measurement and monitoring of temperature, humidity, door contact (access), vibration, movement (infrared room surveillance), smoke, mains voltage – Flexible filter structure for uncomplicated realisation of even complex signal conditions – Operation and display of alarms via LCD display, serial interface or network (Telnet and SNMP) Different interfaces for sensors, data transmission, d

This card is equipped with two high speed RS-232 serial interfaces and one 1284 centronics parallel interface. The serial ports include 16Byte FIFO with speeds up to 430Kb/Sec and up to 1.5MB/Sec on the Parallel port. Port Specification Serial Port: · Chipset: MosChip MCS9901, 16Byte FIFO · Compatible chips: with 16C550 and 16C450. · IEEE standard: RS-232 Interface · Max. Speed: Bi-directional speeds from 50 bps to 16Mbps/port Parallel Port: · Chipset: MosChip MCS9901 · IEEE standard: IEEE 1284

The USB VGA Adapter enables you to connect an additional display device (CRT/LCD monitor, projector) to your desktop or notebook PC. The connected display can act as mirrored or extended desktop (it can also be used as the primary display) of the main display on your PC. The flexibility of USB 2.0 technology saves the need to open the computer and install a VGA graphics card. System Requirements • Available USB 2.0 port • Minimum Requirement to use one (1) USB Display Adapter: Intel/AMD Single C

Refer servicing to qualified personnel • Carefully read all notes and instructions before using this product • This device should be securely mounted in 19” rack enclosure • Do not use liquid cleaning products or products containing abrasives, clean only with a soft damp cloth • Ensure there is sufficient ventilation to prevent overheating • Never obstruct or block the ventilation slots or other openings, and do not position the device in any location where there is insufficient ventilation Feat