Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
The USB VGA Adapter enables you to connect an additional display device (CRT/LCD monitor, projector) to your desktop or notebook PC. The connected display can act as mirrored or extended desktop (it can also be used as the primary display) of the main display on your PC. The flexibility of USB 2.0 technology saves the need to open the computer and install a VGA graphics card. System Requirements • Available USB 2.0 port • Minimum Requirement to use one (1) USB Display Adapter: Intel/AMD Single Core 1.5GHz or higher processor, RAM: 512MB memory or higher • 2~3 Displays -(additional USB display adapters): Intel/AMD Single Core 2.4GHz or higher processor, RAM: 1GB memory or higher • 4~6 Displays (additional USB display adapters): Intel/AMD Dual Core 2.0GHz or higher processor, RAM: 2GB memory or higher • Windows 2000 SP4 / Windows XP SP2 / Windows Vista Package Contents • USB 2.0 to VGA Adapter • Driver CD • LINDY Manual Features • USB 2.0 compliant • supports display resolution up to VGA : 1600 x 1200 • Plug-and-Play USB connectivity • Display Modes: Primary, Extended, Mirror • Display Rotation: 0°, 90°, 180°, 270° • Identify Monitors • Multi-Display Control Panel • Short-cut to access Windows Display Setting 3 User Manual English Resolution USB-VGA Refresh Rate Frequency 800 * 600 16bit, 32bit 60Hz,75Hz 1024 *768 16bit, 32bit 60Hz,75Hz 1152 * 864 16bit, 32bit 60Hz 1280 * 720 16bit, 32bit 60Hz 1280 * 768 16bit, 32bit 60Hz 1280 * 800 16bit, 32bit 60Hz 1280* 960 16bit, 32bit 60Hz 1280 * 1024 16bit, 32bit 60Hz 1360 * 768 16bit, 32bit 60Hz 1400 * 1050 16bit, 32bit 60Hz 1440 * 900 16bit, 32bit 60Hz 1680 * 1050 16bit, 32bit 60Hz 1600 * 1200 16bit, 32bit 60Hz Installation Windows 2000/XP: Installing the device driver enables your computer’s operating system to recognize the USB VGA Adapter once it’s connected. Please check your operating system and refer to the appropriate installation procedure to begin installing the device driver. Please make sure the USB VGA Adapter is unplugged from your PC or Notebook before executing the setup program. This section illustrates the simple device driver installation procedure for computer running Windows 2000 / XP operating system. Step 1 Insert the Driver CD into the CD-ROM drive; the setup program should be launched automatically. If setup program does not begin automatically, click Start, Run and double click “D:\Setup.exe” (where D: is the path of your CD-ROM drive). 4 User Manual English Step 2 Driver Installation Wizard, click “Next” to continue. Step 3 License Agreement; please read it and select “I accept the terms of the license agreement.” Click “Next” to accept the License Agreement. Step 4 The Microsoft Software Installation Certificate warning dialogue box, please select “Continue Anyway” to continue with the device driver installation. This will not affect the device driver installation and the device usage. 5 User Manual English Step 5 Please select “Yes, I want to restart my computer now”. Then, click “Finish” to complete the software installation. Step 6 (After System Reboot) Please connect the external display device (monitor/projector) to the VGA connector of USB VGA Adapter and switch it on. Then plug the USB VGA Adapter into an available USB 2.0 port of your PC or Notebook. Step 7 A Hardware Installation Wizard dialog will show up, please select “No, not this time” and click “Next” to continue. 6 User Manual English Step 8 Please select “Install the software automatically (Recommended)”. And click ”Next” to continue. Step 9 The Microsoft Software Installation Certificate warning dialogue box, please select “Continue Anyway” to continue with the hardware installation. This will not affect the device driver installation and the device usage. The extended display will be shown on 2nd display device. Step 10 Click “Finish” to complete the Hardware Wizard. 7 User Manual English Step 11 Installation of multiple USB VGA Adapters Please plug the additional USB VGA Adapter into an available USB 2.0 port of your PC or Notebook. a. A Hardware Installation Wizard dialog will show up, please select “No, not this time” and click “Next” to continue. b. Please select “Install the software automatically (Recommended)”. And click ”Next” to continue. c. Please select “Continue Anyway” to complete the device driver installation. The extended display will be shown on additional display device. d. Click “Finish” to complete the Hardware Wizard. e. If you wish to install additional USB VGA Adapter, please follow the procedure a~ d again. 8 User Manual English To make sure the USB VGA Adapter works correctly, please reboot the computer after the installation. After rebooting the computer, the USB extended display will be shown on the display device. Verifying the device driver installation The following procedure allows you to verify the device driver installation. Please right click “My Computer” . “Properties” . “Hardware” . “Device Manager”. Plug-in the USB VGA Adapter, then do...