This precision state-of-the-art measuring instrument is most accurate when weighing on a at hard surface. This scale will not function correctly on carpet. As the electronic sensors are sensitive, avoid dropping or jarring the scale and store where it will be protected from impact. Operating Instructions 1. Place four AAA batteries (total 4) into the battery compartment located on the base of the scale. Ensure the +/-terminals are correctly placed as indicated by the diagram within the battery c

• Use a soft cloth with appliance of alcohol when polishing the scale. • Keep out water or any liquid-type substance from the scale. • Check to see if the scale is placed horizontally before use. If the scale is not in a horizontal position, use the horizontal positioning screw in order to adjust its position. (Have the foam inside of the level gauge be in the center. ) • When the scale is turned on, the display will be set to initial scaling condition after indicating RB-XX. In order to maintai

: 0.31W Platform Size(mm) 337(W) . 256( L) Product Size(mm) Non-pole type 348(W) . 382.4( L) . 153(H) Product Weight Non- pole type 4 kg Display Two side display: Weight (5 Digits), Quantity (8 Digits) , Unit Weight (6 Digits) Operating hours with battery Manganese battery - 500hrs , Alkaline battery - 1,000hrs (Without Back light) Direct PLU 20 Direct PLU keys Quantity Shortage Range g 15 30 75 150 lb 0.03 0.66 0.2 0.3 Unit Weight Shortage Range g 0.33 0.66 1.33 3.33 lb 0.001 0.002 0.003 0.00

TOTAL TARE ZERO Short Q'ty kg g/pc pcs - Set up the preferable time to turn off the power by using the “+” key or “=” key while the display is showing as picture No. 2. W eighing range : 40 g ~ 6/15 kg, e = d : 2 g / 5 g (0.1 lb ~ 15/30 lb, e = d : 0.005 lb/0.01 lb) lb Model : CB-15N WEIGHT UNIT WEIGHT QUANTITY BAT Short Unit Wt. TOTAL TARE ZERO Short Q'ty kg g/pc pcs - Complete the procedures to set up the time using the “M” key. Not pushing the “M” key does not save this function. .. The scale

TOTAL TARE ZERO Short Q'ty kg g/pc pcs 2. Place the product on the platform. (In cased : 200 g) W eighing range : 40 g ~ 6/15 kg, e = d : 2 g / 5 g (0.1 lb ~ 15/30 lb, e = d : 0.005 lb/0.01 lb) lb Model : CB-15N WEIGHT UNIT WEIGHT QUANTITY BAT Short Unit Wt. TOTAL TARE ZERO Short Q'ty kg g/pc pcs ¦ Procedures to add up the Unit weight - Although there are many products to be measured, the quantity of the scaled each objects can be added up disregarding their unit weight. - The number of add-ups

¦ Procedures to Set up and Release the Tare: Used when scaling liquid or grain type substances that require a container. • Cases when the container weight is not known. 1. Place the container on the platform. 2. Push the “Tare” key when the weighing is stable. 3. Check the lighting of Tare. • Cases when the container weight is known. 1. Input the container weight using the number keys. 2. Push the “Tare” key. 3. Place the container on the platform. 4. Check the lighting of Tare. • Release the Ta

IMPORTANT 1. Read all instructions before operating the scale. 2. Follow the basic safety precautions for all office equipment when using this scale. 3. The manufacturer does not warrant this unit to be waterproof. Do not expose this product to rain or moisture. 4. Do not use the scale in direct sunlight. Keep it away from heating appliances such as an oven, stove, etc. 5. This scale does not contain any user-serviceable parts. Do not disassemble. 6. Use the scale for its intended purpose only.

3. Input the upper limit quantity in the “UNIT WEIGHT” display. Then press “M+” key to confirm. 4. Input the lower limit quantity in the “TOTAL (PCS)” display. Then press “M+” key to confirm. 5. Place the samples on the scale platform. When the quantity arrives at the upper limit, the scale will alarm with a beep sound. The “WEIGHT” display will show the weight, the “UNIT WEIGHT” display will show . 6. If the quantity of the sample is below the lower limit, scale will alarm with beep, beep sound

Unit weight of item is unknown 1. Turn on the scale. 2. Place the samples on the platform and the exact weight of samples will be displayed. 3. Input the quantity of the samples, Then press “SET UNIT” key, Remark: the unit weight will be stored in the scale and can be recalled by pressing the “UNIT WGT” key. 3 (B). Unit weight of item is known 1. Turn on the scale. 2. Input the unit weight of the samples. 3. Press “UNIT WGT” key. The unit weight of the sample is stored in the scale. COUNTING 1.