Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
IMPORTANT 1. Read all instructions before operating the scale. 2. Follow the basic safety precautions for all office equipment when using this scale. 3. The manufacturer does not warrant this unit to be waterproof. Do not expose this product to rain or moisture. 4. Do not use the scale in direct sunlight. Keep it away from heating appliances such as an oven, stove, etc. 5. This scale does not contain any user-serviceable parts. Do not disassemble. 6. Use the scale for its intended purpose only. Note: The display value may be affected by electromagnetic influences, e.g. when a radio is operated in the immediate vicinity of the device. The product can be used for its intended purpose again when the interference is discontinued, but may need to be switched on again to re-start. 1 PARTS DESCRIPTION Stainless Steel Scale Platform Bubble Leveler Weight Display Unit Weight Display Total Pcs Display Numeric and Function Keys Cancel Upper & Lower Limit Unit Weight Recall AC Socket Level Adjusting feet Upper & Lower Limit Setting Unit Weight Setting PARTS DESCRIPTION Stainless Steel Scale Platform Bubble Leveler Weight Display Unit Weight Display Total Pcs Display Numeric and Function Keys Cancel Upper & Lower Limit Unit Weight Recall AC Socket Level Adjusting feet Upper & Lower Limit Setting Unit Weight Setting Rechargeable Power On/off Battery Door Switch SYMBOLS 1) 2) Insufficient sample size Insufficient unit weight 3) Battery Low 4) Accumulating M+ 2 5) Cancel Accumulating MC OPERATION LEVEL THE SCALE When the scale is put to use at a new place, adjust the level of the scale by turning the 4 level adjusting feet until the bubble is located in the middle position of the bubble.leveler. ACTIVATING THE SCALE 1. Turn on the “power on/off switch” 2. All LCD displays will light up and display 9,8,7,6,5,4,3,2,1,0,A,B,C,D,E,F in turn until the LCD displays as shown : SET UP UNIT WEIGHT Example : 4 pcs of pencil : (A). Unit weight of item is unknown 1. Turn on the scale. 2. Place the samples on the platform and the exact weight of samples will be displayed. 3. Input the quantity of the samples, Then press “SET UNIT” key, Remark: the unit weight will be stored in the scale and can be recalled by pressing the “UNIT WGT” key. 3 (B). Unit weight of item is known 1. Turn on the scale. 2. Input the unit weight of the samples. 3. Press “UNIT WGT” key. The unit weight of the sample is stored in the scale. COUNTING 1. The scale is powered on 2. Put objects on the scale platform 3. Press “UNIT WGT” key. 4. The quantity of the objects will be shown on the TOTAL (PCS) display. ACCUMULATE COUNTING: 1. Repeat COUNTING procedures above (1) to (4). 2. Press “M+” key. 3. The ‘UNIT WEIGHT” display will show followed by . 4. After 2 seconds, the scale will return to the counting model 5. Take off the first samples and put the second samples (e.g. 30 pcs) on the scale platform. 6. Press “M+” key. 7. The ‘UNIT WEIGHT” display will show followed by . 8. Repeat the procedures until ...
Эта инструкция также подходит к моделям:Весы - C3315 (181.85 kb)
Весы - C6630 (181.85 kb)