16. Check the LP gas grill for gas leaks and burner obstructions before each use. WARNING! Do not use a flame to check for gas leaks. See Before Using Your LP Gas Grill section of this manual for correct leak test procedures. A clogged burner tube can lead to a fire beneath grill. • If the fire is in the grill portion and you can safely reach the control knobs, turn them off by turning knobs clockwise. If you cannot safely reach the control knobs or the LP cylinder valve, call the fire departmen

Shut off gas to the appliance. 2. Extinguish any open flame. 3. Open Lid. 4. If odor continues, immediately call your gas supplier or your fire department. FOR YOUR SAFETY 1. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. 2. An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance. • READ AND FOLLOW INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY OR USE. FAILURE TO FOLLOW THESE INSTRUCTIONS

Model 6112 ONLY Be sure to route the regulator hose UNDER the Fig. 3 Clyinder Retainer Wire as shown below. 26 26 6. If “growing” bubbles appear on any of the connection points, you have detected a gas leak. Immediately close the LP Gas Cylinder valve by turning handle clockwise a. If leak appears at either end of hose and regulator assembly, retighten the connection at the leak, but do not over-tighten. (NOTE: Only hand tighten at coupling nut in Fig. 1 shown on previous page) Repeat Leak Test.

The Burner can also be lit manually, see Manual Lighting of the Grill on page 28. Manually Lighting the Grill ! WARNING To reduce the risk of serious bodily injury or death from fire or explosion: • Open Hood before lighting the grill to prevent an explosion from gas build-up. 1. Open the Hood. 2. IMPORTANT: Make sure Control Knobs are turned “Off.” (Fig. 4 - P.27) 3. Turn the LP Gas Cylinder valve open counterclockwise until it stops. (Fig. 5- P.27) 4. Locate match-lighting hole at the right en

Need Help? Need to Register Your Grill? Looking for Aussie Parts & Accessories? Visit us online at Or call Aussie Customer Service at 1 800 251 7558 WARNING ! DANGER ! • Failure to follow these intructions could result in fire or explosion which could cause death, serious personal injury, or property damage. • Read and follow instructions carefully before assembly or use. • Do not use this product for any other purpose than which it is intended. • These instructions must be kept with the user. S

Remove Grill and all the packaging from carton and place on floor. Make sure there are no loose parts. NOTE: Before using your grill, read the instructions and your manual. For easier set-up and assembly, follow instructions of each step in the order they are written as you look at the diagrams. If accessories mentioned in certain assembly steps do not come with your model, skip that step and proceed to the next step that applies to your model. If you have any questions or need help, contact Cus

Do not add more instant light briquettes once the fire has been lit. Add regular charcoal briquettes if more are needed. 9. Once the barbecue grill has been lit, do not touch the charcoal briquettes/wood chunks to see if they are hot. Do not close hood until ready to cook. 10. Allow coals to burn out completely and let the ashes cool for 48 hours before disposing of them. 11. Dispose of cold ashes by wrapping them in heavy-duty aluminum foil and putting them in a non-combustible container. Be

Need Help? Need to Register Your Grill? Looking for Aussie Parts & Accessories? Visit us online at Or call Aussie Customer Service at 1 800 251 7558 WARNING ! DANGER ! If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. Open lid. 4. If odor continues, keep away from the appliance and immediately call your gas supplier or your fire department. • Failure to follow these instructions could result in fire or explosion which could cause death, serious personal injury,

(FIG. 5B) Hold spacers between leg and body and insert M6 x 90 bolt through leg, spacer, and slotted hole in Grill body. Attach M6 Wingnut, but do not tighten. Repeat assembly for three remaining legs. • With the help of a second person, lift the Grill into the upright position. Grill body should slide down into slotted holes and seat itself. If not, loosen the wingnuts and push down on the corners of the body. • Tighten all bolts and wingnuts. Also tighten all Bottom Shelf and Side Table bolts.

NOT FOR COMMERCIAL USE. • Failure to follow these instructions could result in fire or explosion which could cause death, serious personal injury, or property damage. • Read and follow instructions carefully before assembly or use. • Do not use this product for any other purpose than which it is intended. • These instructions must be kept with the user. SAVE THESE INSTRUCTIONS. If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. Open lid. 4. If odor continues, ke