Ist die Kapazitat des Accus erschopft, bzw. D 6. Befestigen Sie Hilfe der Kabelclips 7 am Gestange. Achtung! Das Kabel darf nicht in den Bereich der Messerwalze durchhangen. 4.5 Einstellen der Schnitthohe (Abb. D/ D1) A A Achtung! Stellen Sie die Schnitthohe stets bei abgeschaltetem Motor ein. Sonst besteht Verletzungsgefahr! Zum Einstellen der Schnitthohe am Accu-Motormaher verfahren Sie wie folgt: 1. Stellen Sie den Accu-Motormaher auf einen festen, geraden Untergrund. 2. Stellen Sie sich vor

v Check that the ventilation slots are not obstructed in any way. Do not use your Turbotrimmer if the safety devices (push button, safety cover) and/ or the filament cassette are damaged or worn. v Never bypass the safety devices. v Inspect the area to be cut before you begin work. Remove any foreign objects (such as stones). Look out for foreign objects (such as stones) while you are working. v If you should come across an obstacle while cutting, turn off the Turbotrimmer. Remove the object and

3. Check the Lawn Scarifier for damage and have it repaired if necessary. GB Correct aerating: 4. Assembly The Lawn Scarifier can be used for removing matting and moss in the lawn and thatch. To maintain a well-cared-for lawn we recommend aerating every 4 -6 weeks depending on the state of your lawn. v First of all, mow your lawn to the length you require. We particularly recommend this if the grass has grown tall (e.g.while you were away on holiday). Recommendation: the shorter you mow your law

(149 mm) 6.03 in. (153 mm) 6.27 in. (159 mm) 7.15 in. (182 mm) F 8.82 in. (224 mm) 8.82.in. (224 mm) 8.82.in. (224 mm) 8.82.in. (224 mm) 8.82 in. (224 mm) G 15.10 in. (384 mm) 15.19 in. (386 mm) 15.15 in. (385 mm) 19.85 in. (504 mm) 21.62 in. (549 mm) H 15.6 in. (396 mm) 15.6 in. (396 mm) 15.65 in. (398 mm) 20.35 in. (517 mm) 26.12 in. (663 mm) I 1.58 in. (40 mm) 1.18 in. (30 mm) 1.47 in. (37 mm) 1.34 in. (34 mm) 0.97 in. (25 mm) J 30.21 in. (767 mm) 34.57 in. (878 mm) 39.72 in. (1009 mm) 42.54

The Accu becomes warm when using the cylinder mower. This is normal and does not impair its performance. Blockage protection: If the cylinder mower is blocked by a foreign body or the motor is overloaded (red Error-LED lights up), the motor is automatically switched off by the blockage protection (loud rattling). Remove key from socket, remove foreign body or rectify the cause of the overloading and restart the mower after a few seconds. GH Charge display: green LED Accu fully charged yellow LED

When mowing embankments and slopes, special care is to be taken: v make sure you always have a safety distance and wear shoes with a non slip sole. 3. Assembly Always cut diagonally to the slope. Take special care when moving backwards and when pulling the lawn mower. Danger of stumbling! If the cutting tools or the lawnmower should run into an obstruction and/or solid objects, the lawn mower should be properly and thoroughly inspected. v Only work when visibility is good. Never leave the lawnmo

Residual dirt and grass is easily removed immediately after mowing. 1. Remove grass deposits with a brush and a cloth. 2. Oil the red cutting mechanism lightly with thin oil (e.g. sprayed oil). 7. Troubleshooting DANGER! Cutting tool can cause injuries! V Wear suitable work gloves when rectifying faults. 10 Fault Possible Cause Rectification Abnormal Noises Screws / components loose v Tighten screws Foreign bodies on the blade. v Remove foreign bodies. Notch in the blade v Remove notches with gr

Please refer to the applicable manufacturer’s warranty on these items. This warranty will not apply where the unit has been used commercially. Warranty service is available through your local authorized service dealer or distributor. If you do not know the dealer or distributor in your area, please write to the Customer Service Department of MTD. The return of a complete unit will not be accepted by the factory unless prior written permission has been extended by MTD. This warranty gives you

MTD PRODUCTS INC. extends its warranty only on the edger. If repairs or service is needed on the engine, please contact your nearest, authorized engine service outlet. Check the "Yellow Pages" of your telephone book under "Engines — Gasoline". Find It Fast In Th* 'Yellow Pages' FORM NO. 770-2435C ASSEMBLY STARTING INSTRUCTIONS Your new edger is shipped preassembled with the exception of the handle, rear wheels, and throttle control. 1. Remove the edger and all parts from the carton. Make c

Move the mower outside before adding gasoline. Use a funnel and wipe up any spilled fuel before starting. Remember, gasoline expands when heated so leave some expansion room. Also, most mower gas caps are vented to allow for expansion. Always use the proper cap. People are needlessly burned by fires, hurt in explosions, mowers and other property are damaged because of failure to follow basic safety rules related to gasoline and fueling. Never add gasoline to an engine that is running or that is