• ATX power button/soft-off button (Light Green 2-pin PWRSW) This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. • Reset button (Blue 2-pin RESET) P5M2-M/C_TS100-E4 ®

Turn on the system after installing all the SATA hard disk drives. 2. During POST, the LSI Logic Embedded SATA RAID Setup Utility automaticallydetects the installed SATA hard disk drives and displays any existing RAIDset(s). Press + to enter the utility. • The LSI Logic Embedded SATA RAID auto configures to RAID 1 when the SATA to RAID Mode is enabled. • The RAID setup screens shown in this section are for reference only andmay not exactly match the items on your screen due to the con

Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD. 5. ATX power button/soft-off button (Green 2-pin PWRSW) This connector is for the system power button. Pressing the powerbutton turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for morethan four seconds while the system is ON turns the system OFF. 6. Reset button (Blue 2-pin RESET) This 2-pin

Configuration options: [1.1] [1.4] Frequency Ratio [Default] Allows you to select the processor frequency ratio. Configuration options: [Default] [X 12] [X 13] [X 14] [X 15] [X 16] [X 17] The configuration options of Frequency Ratio may vary according to your CPU. Hyperthreading [Enabled] Allows you to enable or disable the Intel® Hyper-Threading Technology feature. Configuration options: [Disabled] [Enabled] Intel(R) Virtualization Technology [Enabled] Configuration options: [Disabled] [Enabled

Specifications are subject to change without notice. ASUS provides this manual “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASUS be liable for any loss or profits, loss of business, loss of use or data, interruption of business, or for indirect, special, incidental, or consequential damages of any kind, even if ASUS has been advised of th