Оценок - 2, средний балл: 4 ( )

Производитель: Asus Размер: 6.72 mb Название файла: Язык инструкции:

Turn on the system after installing all the SATA hard disk drives. 2. During POST, the LSI Logic Embedded SATA RAID Setup Utility automaticallydetects the installed SATA hard disk drives and displays any existing RAIDset(s). Press + to enter the utility. • The LSI Logic Embedded SATA RAID auto configures to RAID 1 when the SATA to RAID Mode is enabled. • The RAID setup screens shown in this section are for reference only andmay not exactly match the items on your screen due to the controllerversion difference. 3. The utility main window appears. Use the arrow keys to select an option from the Management Menu, then press . Refer to the Management Menu descriptions on the next page. At the bottom of the screen is the legend box. The keys on the legend box allow you to navigate through the setup menu options or execute commands. The keys on the legend box vary according to the menu level. ASUS DSBV-DX Series Menu Description Configure Initialize Objects Rebuild Check Consistency Allows you to create RAID 0 or RAID 1 set using the Easy Configuration or the New Configuration command. This menu also allows you to view, add, or clear RAID configurations or select the boot drive Allows you to initialize the logical drives of a created RAID set Allows you to initialize logical drives or change the logical drive parameters Allows you to rebuild failed drives Allows you to check the data consistency of the logical drives of a created RAID set 5.2.1 Creating a RAID 0 or RAID 1 set The LSI Logic Embedded SATA RAID Setup Utility allows you to create a RAID 0 or RAID 1 set using two types of configurations: Easy and New. In Easy Configuration, the logical drive parameters are set automatically including the size and stripe size (RAID 1 only). In New Configuration, you manually set the logical drive parameters and assign the set size and stripe size (RAID 1 only). Using Easy Configuration To create a RAID set using the Easy Configuration option: 1. From the utility main menu, highlight Configure, then press . 2. Use the arrow keys to select Easy Configuration, then press . Chapter 5: RAID configuration 3. The ARRAY SELECTION MENU displays the available drives connected tothe SATA ports. Select the drives you want to include in the RAID set, then press . When selected, the drive indicator changes from READY to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number. The information of the selected hard disk drive displays at the bottom of the screen. 4. Select all the drives required for the RAID set, then press . The configurable array appears on screen. ASUS DSBV-DX Series 5. Press , select the configurable array, then press . Press again, the logical drive information appears including a LogicalDrive menu that allows you to change the logical drive parameters. Chapter 5: RAID configuration 6. Select RAID from the Logical Drive menu, then press . 7. Select the RAID level from the menu, then press . You need at least two identical hard disk drives when creating a RAID 1 set. 8. When creating a RAID 1 set, select DWC from the Logical Drive menu, then press . When creating a RAID 0 set, proceed to step 10. 9. Select On to enable the Disk Write Cache setting, then press . Enabling DWC can improve the performance, but with the risk of data loss. ASUS DSBV-DX Series 10. When finished setting the selected logical drive configuration, select Accept from the menu, then press . 11. When finished setting the selected logical drive configuration, select Accept from the menu, then press . 12. Follow steps 5 to 10 to configure additional logical drives. 13. When prompted, save the configuration, then press to return to the Management Menu. Chapter 5: RAID configuration Using New Configuration When a RAID set is already existing, using the New Configuration command erases the existing RAID configuration data. If you do not want to delete the existing RAID set, use the View/Add Configuration command to view or create another RAID configuration. To create a RAID set using the New Configuration option: 1. From the utility main menu, highlight Configure, then press . 2. Use the arrow keys to select New Configuration, then press . 3. Follow steps 3 to 7 of the previous section. 4. Select Size from the Logical Drive menu, then press . 5. Key-in the desired logical drive size, then press . 6. Follow steps 8 to 13 of the previous section to create the RAID set. ASUS DSBV-DX Series 5.2.2 Creating a RAID 10 set You can create a RAID 10 set using four identical hard disk drives. To create a RAID 10 set using the Easy Configuration option: 1. From the utility main menu, highlight Configure, then press . 2. Use the arrow keys to select Easy Configuration, then press . 3. The ARRAY SELECTION MENU displays the available drives connected tothe SATA ports. Select the drive(s) you w...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: