Оценок - 5, средний балл: 4.4 ( )

Производитель: Performance Teknique Размер: 3.81 mb Название файла: Язык инструкции:

. Use only the supplied Fan are missing please for advice. CY-PA4003U/CY-PA4003U/ 22 23 Air hole 24 English CY-PA4003U/PA2003U/PAD1003U 25 English CY-PA4003U/PA2003U/PAD1003U Wiring Caution . This unit is designed for use in a car having a 12 V negative ground battery system. . Be sure to insulate any exposed wires to prevent short circuiting with the car chassis. Bundle all cables, and prevent cable terminals from touching any metal parts. . Note that if your car has a driving computer or a navigation computer, disconnecting the cable from the battery may clear the memory. . Run the cords avoiding the spots where the temperature can be extremely high. . Continuous use of a system that exceeds the maximum permissible input levels may damage the speakers. . Since the power amplifi er has a very large output, the unit should be installed in the trunk of your car. . Do not install this unit under a carpet, otherwise the unit may fail because of immature heat dissipation. Caution for the power cord (option):. . Follow an expert’s instruction for the use of the cord separately sold. . For the power, make sure to use the battery lead (yellow) separately sold and specially designed for Panasonic car-audio/AV system, and to connect directly to the car battery. Use the cord having the fuse capacity larger than that of this unit. Connect the power cord and other cords corresponding to the power supply after all the connections to the speaker are completed. . Keep the battery lead (yellow) away from the speaker cord. . Make sure to use the ground lead (black) separately sold and specially designed for car audio system, and to connect it to the metal portion of the car chassis. . Wire the battery lead (yellow), the ground lead (black), the speaker cords, and this unit with as much distance as possible from the antenna, the antenna cords and the car stereo (car radio). . If the ground wire is common to both left/right and front/rear speaker wirings, this unit cannot be used. Always use the independent lead wire for the speakers to be used. In this case, redo the wiring. Caution for the speaker cord (option):. . The speaker cords and the power amplifi er unit should be kept away from the antenna and antenna extension cord. . Do not directly ground the speaker cords; do not share the negative leads of multiple speakers. . When using the RCA cords, keep away from the speaker cords. Caution for the speaker (option):. . Use speakers with a suitable maximum input. . In case of 4-channel/3-channel connection : Use speakers with the impedance of 2.8 .. . In case of 2-channel/stereo connection: Use speakers with the impedance of 4.8 .. Terminal Cover for Short-circuit Prevention This terminal cover is for preventing short-circuit between adjacent terminals. Before connecting each lead, pass it through the terminal cover. After connecting the leads to the terminals, cover the speaker output terminals and power terminals with this cover. Make sure that the projections to prevent slipping out are facing down. . Terminal cover for short-circuit prevention . Terminal cover for short-circuit prevention Speaker Output Terminal Screw Connection Power Terminal Screw Connection For power connection, use the optional battery lead (yellow) specially designed for car-audio system and connect it directly to the car battery. Use the cord having the fuse capacity larger than that of this unit. Securely tighten each lead with a terminal screw. 1 Unscrew the terminal screw. 2 Insert the screw into the terminal of the lead. Securely fasten the screw. If the battery lead has to be routed through high temperature area, protect it with a corrugated tube (option). Battery Lead (Yellow) Corrugated tube (10 mm) Speaker terminal Speaker cord Terminal screw Terminal screw Battery terminal External amplifi er control terminal Ground terminal Battery Lead (Yellow) External Amplifi er Control Lead (Blue/white stripe) Ground Lead (Black) Terminal screw 1 Using a nipper or cutter, expose approximately 10 mm long of the core of the speaker cord and twist its end. 2 Attach the speaker terminal onto the speaker cord. 3 Unscrew the terminal screw. 4 Insert the screw into the terminal of the cord. Securely fasten the screw. English English Wiring Speaker Connections with RCA cord Speaker Connections with SPEAKERS INPUT Connectors Example: 4 channel speaker connection (4CH input) Example: 4 channel speaker connection (4CH input) Note for RCA Input Connection: . Selectively assign each front and rear output to either RCA INPUT A or B, in accordance with the system from which the output is coming. INPUT SELECT 4/2 CHANNEL SWITCH . In case of a single line coming from the RCA output of Head Unit, connect the line to RCA INPUT A. Do not connect it to RCA INPUT B. INPUT CH B INPUT CH A INPUT SELECT INPUT SELECT LINE LINE 4/2 CHANNEL SWITCH 4CH CH A CH B SPEAKERS INPUT S...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: