Войти:
Оценок - 3, средний балл: 4 ( )

Инструкция по эксплуатации Performance Teknique, модель CY-PA2003U

Производитель: Performance Teknique
Размер: 3.81 mb
Название файла: CYPA4003U.pdf
Язык инструкции:enesfr
Перейти к скачиванию



Фрагмент инструкции


Please read these instructions (including this product and keep this manual . Priere de lire attentivement ) avant d’utiliser ce produit . Lea con atencion estas Safety Information Read the operating instructions for the unit and all other Caution components of your car audio system carefully before using the system. They contain instructions about Observe the following cautions when using this how to use the system in a safe and effective manner. English English Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual. This manual uses pictographs to show you how to use the product safely and to alert you to potential dangers resulting from improper connections and operations. The meaning of the pictographs are explained below. It is important that you fully understand the meanings of the pictographs in order to use this manual and the system properly. This pictograph intends to alert you to the presence of important operating instructions. Failure to heed the instructions may result in severe injury or death. This pictograph intends to alert you to the presence of important operating instructions. Failure to heed the Warning Observe the following warnings when using the unit. Use the proper power supply. This product is designed for operation with a negative grounded 12 V DC battery system. Never operate this product with other battery system, especially a 24 V DC battery system. Do not disassemble or modify the unit. Do not disassemble, modify the unit or attempt to repair the product yourself. If the product needs to be repaired, consult your dealer or an authorised Panasonic Servicenter. Do not use the unit when it is out of order. If the unit is out of order (no power, no sound) or in an abnormal state (has foreign objects in it, is exposed to water, is smoking, or smells), turn it off immediately and consult your dealer. Refer fuse replacement to qualifi ed service personnel. When the fuse blows out, eliminate the cause and have it replaced with the fuse prescribed for this unit by a qualifi ed service engineer. Incorrect replacement of the fuse may lead to smoke, fi re, and damage to the product. When replacing one fuse which has blown, replace other fuses at the same time. In some cases, fuses may deteriorate without failing. Using different substitutes or fuses with higher ratings, or connecting the unit directly without a fuse, could cause fi re or damage to the unit. If the replacement fuse fails, contact your nearest Panasonic Servicenter for service. Warning Please follow the laws and regulations of your province or country for installation of the unit. Observe the following warnings when installing. Disconnect the lead from the negative ( . ) battery terminal before installation. Wiring and installation with the negative ( . ) battery terminal connected may cause electrical shock and injury due to a short circuit. Some cars equipped with the electrical safety system have specifi c procedures of battery terminal disconnection. FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY OR DEATH. Never use safety-related components for installation, grounding, and other such functions. Do not use safety-related vehicle components (fuel tank, brake, suspension, steering wheel, pedals airbags, etc.) for wiring or fi xing the product or its accessories. Check for piping, gasoline tank, electric wiring, and other items before installing the product. If you need to open a hole in the vehicle chassis to attach or wire the product, fi rst check where the wire harness, gasoline tank, and electric wiring are located. Then open the hole from outside if possible. After installation and wiring, you should check the normal operation of other electrical equipment. The continuation of their using in abnormal conditions may cause fi re, electrical shock or a traffi c accident. In the case of installation to an airbag-equipped car, confi rm warnings and cautions of the vehicle manufacturer before installation. Make sure the leads do not interfere with driving or getting in and out of the vehicle. Failure to heed this caution may result in an accident and/or injury. Warning unit. Turn off the power supply before changing the switch setting. Keep the sound volume at an appropriate level. Keep the volume level low enough to be aware of road and traffi c conditions while driving. This unit is designed for use exclusively in automobiles. Do not operate the unit for a prolonged period with the engine turned off. Operating the audio system for a long period of time with the engine turned off will drain the battery. Do not expose the unit to direct sunlight or excessive heat. Otherwise these will raise the interior temperature of the unit, and it may lead to smoke, fi re, or other damage to the unit. Do not use the product where it will be exposed to water,...

Эта инструкция также подходит к моделям:
Автоусилители - CY-PAD1003U (3.81 mb)
Автоусилители - CY-PA4003U (3.81 mb)
Автоусилители - CY-PA2003U (3.81 mb)
Автоусилители - CY-PA4003U (3.81 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории