Оценок - 4, средний балл: 3.8 ( )

Производитель: Panasonic Размер: 3.81 mb Название файла: CYPA4003U.pdf Язык инструкции:

For power connection, use the optional specially designed for use with Panasonic AV system. Power cord kid (option): CA-PAC75 CY-PA4003U/ Depending on the way you use this unit, (using at high volume for extended periods, increasing the number of amplifi ers etc. ) there may be insuffi cient battery capacity. There is a danger that the battery run fl at, or other electronic parts may stop operating. Do not knock anything against this unit when loading or unloading objects from the trunk. Doing so will cause damage to this unit. CY-PA4003U/ Safety Information (continued) English English Caution Observe the following cautions when installing. Refer wiring and installation to qualifi ed service personnel. Installation of this unit requires special skills and experience. For maximum safety, have it installed by your dealer. Panasonic is not liable for any problems resulting from your own installation of the unit. Follow the instructions to install and wire the product. Not following the instructions to properly install and wire the product could cause an accident or fi re. Take care not to damage the leads. Prevent them from getting caught in the vehicle chassis, screws, and moving parts such as seat rails. Do not scratch, pull, bend or twist the leads. Do not run them near heat sources or place heavy objects on them. If leads must be run over sharp metal edges, protect the leads by winding them with vinyl tape or similar protection. Use the designated parts and tools for installation. Use the supplied or designated parts and appropriate tools to install the product. The use of parts other than those supplied or designated may result in internal damage to the unit. Faulty installation may lead to an accident, a malfunction or fi re. Do not install the product where it is exposed to strong vibrations or is unstable. Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury. We strongly recommended you to wear gloves for installation work to protect yourself from injuries. Failure to heed this caution may result in an accident and/or injury. Be sure to grip both sides of this unit securely before attempting to move it. Since this unit is quite heavy, the unit may fall down and this can lead to an accident or injury. Cover the unused terminals with insulating tape to prevent them from short circuiting. When an extension lead is used, it should be as thick and short as possible; connect it fi rmly with insulating tape. Wire breaks and short circuits can cause shock or fi re. Use the spacer included when installing the unit so that the fan and air hole on the base side of the unit are not covered. If the fan and air hole on the base side of the unit are covered, the unit will become extremely hot and may fail. Caution for mounting the unit: Never mount the unit in any of the following locations to avoid damage due to overheating; • Near the heater port. • Places like the dashboard or rear deck, where it may be exposed to direct sunlight. Do not mount the unit near the door, where it could be exposed to rain. Keep a safe distance between the unit and other electronic equipment. When a short circuit occurs, such as in the speaker output terminal, etc. the overload protection circuit will operate. This circuit protects the power amplifi er from further damage when a short circuit occurs. Operation will temporarily stop. In this case, check the cause of the short-circuit and if the problem is fi xed, normal operation will resume. Since the power amplifi er has a very large output, the unit should be installed in the trunk of your car. Do not install this unit under a carpet, otherwise the unit may fail because of immature heat dissipation. In case more than one power amplifi er is used, make sure to employ the power cord and the fuse having the current capacity larger than the total current corresponding to the maximum consumption powers of all the amplifi ers. Caution for the power cord (option): Follow an expert’s instruction for the use of the cord separately sold. For the power, make sure to use the battery lead (yellow) separately sold and specially designed for Panasonic car-audio/AV system, and to connect directly to the car battery. Use the cord having the fuse capacity larger than that of this unit. Connect the power cord and other cords corresponding to the power supply after all the connections to the speaker are completed. Keep the battery lead (yellow) away from the speaker cord. Make sure to use the ground lead (black) separately sold and specially designed for car audio system, and to connect it to the metal portion of the car chassis. Wire the battery lead (yellow), the ground lead (black), the speaker cords, and this unit with as much distance as possible from the antenna, the antenna cords and the car stereo (car radio). If the ground wire is common to both left/right and f...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: