Need Help? Need to Register Your Grill? Looking for Aussie Parts & Accessories? Visit us online at Or call Aussie Customer Service at 1 800 251 7558 WARNING ! DANGER ! If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. Open lid. 4. If odor continues, keep away from the appliance and immediately call your gas supplier or your fire department. • Failure to follow these instructions could result in fire or explosion which could cause death, serious personal injury,

DANGER ! WARNING ! If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. Open lid. 4. If odor continues, keep away from the appliance and immediately call your gas supplier or your fire department. Failure to follow these instructions could result in fire or explosion which could cause property damage, personal injury or death. • This instruction manual contains important information necessary for the proper assembly and safe use of this appliance. Failure to follo

Shut off gas to the appliance. 2. Extinguish any open flame. 3. Open Lid. 4. If odor continues, immediately call your gas supplier or your fire department. FOR YOUR SAFETY 1. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. 2. An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance. • READ AND FOLLOW INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY OR USE. FAILURE TO FOLLOW THESE INSTRUCTIONS

16. Check the LP gas grill for gas leaks and burner obstructions before each use. WARNING! Do not use a flame to check for gas leaks. See Before Using Your LP Gas Grill section of this manual for correct leak test procedures. A clogged burner tube can lead to a fire beneath grill. • If the fire is in the grill portion and you can safely reach the control knobs, turn them off by turning knobs clockwise. If you cannot safely reach the control knobs or the LP cylinder valve, call the fire departmen

· Make sure there are no sharp bends in the hose or tubing. · Make sure Regulator Hose does not contact hot metal surfaces. 25 · Never connect or disconnect LP gas cylinder or fittings while grill is in use or is hot. · When the LP gas cylinder is connected, the grill must be kept outside in a well-ventilated space. Turn off all of the grill control knobs and the LP cylinder valve when grill is not in use. · Move gas hose as far away as possible from hot surfaces. How to Connect your LP gas cyli

(FIG. 5B) Hold spacers between leg and body and insert M6 x 90 bolt through leg, spacer, and slotted hole in Grill body. Attach M6 Wingnut, but do not tighten. Repeat assembly for three remaining legs. • With the help of a second person, lift the Grill into the upright position. Grill body should slide down into slotted holes and seat itself. If not, loosen the wingnuts and push down on the corners of the body. • Tighten all bolts and wingnuts. Also tighten all Bottom Shelf and Side Table bolts.

Lighting the Grill Using the Integra- Spark Ignition System · Open Lid or Hood (depending on the model) before lighting the grill to prevent an explosion from gas build-up. · The Lid (KangaTM series only) must never cover the cooking surface while the LP gas grill is in use or hot. · Always inspect the gas hose and regulator assembly before each use. If the hose is cut, damaged, or shows signs of excessive abrasion or wear, do not use the LP gas grill. Contact the manufacturer, as the hose and r

Do not add more instant light briquettes once the fire has been lit. Add regular charcoal briquettes if more are needed. 9. Once the barbecue grill has been lit, do not touch the charcoal briquettes/wood chunks to see if they are hot. Do not close hood until ready to cook. 10. Allow coals to burn out completely and let the ashes cool for 48 hours before disposing of them. 11. Dispose of cold ashes by wrapping them in heavy-duty aluminum foil and putting them in a non-combustible container. Be

Always check especially after long periods of storing the grill. If the flame is significantly yellow in color, the amount of LP gas in the air/LP gas mixture is not correct. This could be due to a blocked burner from grease drippings or from insects building a nest inside the burner or burner opening. See How to Clean the Burners. GRILL COOKING To reduce the risk of serious bodily injury, death or grill damage: · Always make sure the Grease Cup is empty and properly installed in the wire ring u

•Handle the Grill Body carefully to protect the Body finish. ASSEMBLY CONTINUED NEXT PAGE. GRILL BODY BOTTOM BODY PANEL 14 STEP 6-(CONTINUED) ASSEMBLE GRILL BODY TO CART- KANGA MODELS •Turn Grill Body upside down and position between cart legs with the Hose and Regulator on the Wheel Leg end. Do not lay Grill Body on, or step on, the Hose and Regulator. •Align slotted holes on sides of Grill Body with CASTER LOCK 6mm X 110mm BOLT 6mm X 110mm BOLT SPACER WINGNUT BODY holes through edges of legs (