Оценок - 3, средний балл: 5 ( )

Производитель: Sonicare Размер: 878.42 kb Название файла: Язык инструкции:

Note: each of the first 12 brushings must be at least 1 minute in length to properly move through the Easy-start ramp-up cycle. To turn off or reactivate the Easy-start feature: 1 2 3 Attach your brush head to the handle. Place the handle in a plugged-in charger base. Press and hold the power button for 5 seconds.You will hear 1 beep if the Easy-start feature is off. If you hear 2 beeps, Easy- start is active (on). Using the Easy-start feature beyond the initial ramp-up period is not recommended and reduces Sonicare's effectiveness in removing plaque. ENGLISH 1 2 4 3 The Easy-start feature should be deactivated when Sonicare is used in clinical trials. Smartimer\ 2-minute timer . All Sonicare models come with the Smartimer feature, which automatically sets the brushing time to the 2 minutes recommended by dental professionals. . If you wish to pause or stop brushing during your 2-minute cycle, press the power button. Press the power button again and the Smartimer will pick up where you left off. . The Smartimer will automatically reset to the beginning of a 2-minute cycle if: -brushing is paused for 30 seconds or longer; -the handle is returned to the charger base. Quadpacer\ 30-second interval timer (available on select models). C . Quadpacer makes sure that you brush all sections of your mouth evenly and thoroughly.At 30,60 and 90 seconds,you will hear a short beep and a pause in brushing action.This is your signal to move to the next section of your mouth. Recharge indicator battery charge status (available on select models). . If your Sonicare has a low charge, you will hear 5 beeps after you have brushed your teeth for 2 minutes and the power button light will flash rapidly. When you hear the low charge indication, you have 3 or fewer 2-minute brushings left. 1 Place the handle in the charger base (with the Sonicare logo facing towards you) to begin the recharging process. C . The power button light flashes slowly when the handle is in the charger base to signal charging is in progress. . When the Sonicare is fully charged, the power button light is constantly on (not flashing), signalling that your Sonicare is ready for use. When not in use, keep your Sonicare in the charger base to maintain a full battery charge. 10 ENGLISH Cleaning By following these simple steps, you should get years of worry-free brushing: C C C . Rinse brush head and bristles after each use. 2 Clean the brush head at least once per week, including under the nut. 3 Clean and dry the handle periodically. 4 Clean the charger base periodically. 1 Unplug the charger before cleaning. After cleaning the charger base completely dry the charger before plugging it into an electrical outlet. Mild soap, water and a moist cloth are recommended for cleaning your Sonicare. Utilize the cord wrap feature in the underside of the charger base to store excess cord length. Replacement Brush head Sonicare brush heads should be replaced every 6 months to achieve optimal results. Use only Sonicare Advance replacement brush heads. Environment The handle contains rechargeable nickel cadmium batteries. Batteries must be recycled or disposed of in an environmentally safe way. The batteries inside your Sonicare cannot be replaced, but are easily removed for recycling. At the end of product life and prior to disposal, please remove the batteries from the handle by following the instructions below. ENGLISH 11 Please note that this process is not reversible. To help protect our environment, we encourage you to recycle at approved recycling locations. Do not dispose of the batteries in normal household waste. Removing the batteries To remove the batteries yourself, you will need a flat-head (standard) screwdriver and a small towel. Basic safety precautions should be observed when following the procedure outlined below.Be sure to protect your eyes, hands, fingers and the surface on which you are working. 1 With the brush head still attached to the power handle, completely deplete the batteries of electrical charge by pressing the power button and running a brushing cycle until it stops. Repeatedly run brushing cycles until the handle will no longer activate the brush head. 2 3 C Remove the brush head from the handle. Split the handle open by inserting the...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: