Оценок - 5, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S. A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE. , SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G. m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S. A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA- VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VASTRA FROLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17- 33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA Printed in Malaysia WH82930 Connect external component such as a TV or DVD player to this unit. Connect your TV or DVD player to this unit using appropriate cables as shown below. Connecting a subwoofer enhances bass sound for listening enjoyment. ................ For further information on connecting other components, see pages 15 to 22 in the Owner’s Manual. QUICK REFERENCE GUIDE C2006 All rights reserved. RS-232C REMOTE IN AUX OPTICAL DIGITAL IN AUDIO IN VIDEO IN VIDEO OUT COMPONENT COMPONENT COMPONENT SUBWOOFER DVD/AUX DVD COAXIAL TV/STB TV/STB VCR VCR STB Video output Component video output Coaxial digital output Optical digital output Analog audio output R L Video input Component video input Monaural input DVD player TV Decide where to install this unit. Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner. This unit Connecting external components to this unit Installing this unit When installing this unit under your TV, place it in a TV cabinet as shown below. Make sure that the cabinet is large enough to allow adequate ventilation space around this unit. To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor. When installing this unit above your TV, place it on the top panel of a commercially available rack as shown below. Make sure that the top panel of the rack is wide and stable enough to support the weight of this unit. This quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner’s Manual. Install this unit either above or under your TV. Please read the following for reference. For further information on installation, see pages 11 and 13 in the Owner’s Manual. Make sure you use the supplied fasteners to prevent an accidental fall of this unit (see page 14 in the Owner’s Manual). Install this unit in the exact center of the wall when it is measured from the left and right corners. Install this unit in the corner at a 40° to 50° angle from the adjacent walls. 40° to 50° An object, such as furniture An object, such as furniture To the AC outlet Subwoofer More than 1.8 m (6.0 ft) Within 1 m (3.3 ft) upper or lower from the center Optimizer microphone Cardboard microphone stand Sofa Place the optimizer microphone on the extended center line of this unit and 1.8 m (6.0 ft) or more away from it. Also, make sure place the optimizer microphone within 1 m (3.3 ft) upper or lower from the center height of this unit. y If a subwoofer is connected to this unit, turn on the power of your subwoofer and then carry out the AUTO SETUP procedure (see the backside) or select “SWFR” for “BASS OUT” in “SUBWOOFER SET” (see page 67 in the Owner’s Manual). Optimizer microphone Center line Cables used for connections Connect cables in the following order. For the connection 2, use either (a) or (b). If your DVD player has component video output jacks, we suggest using the cable (b). 1 Digital audio pin cable (supplied) 2a Video pin cable 2b Component video pin cable 3 Optical cable (supplied) 4 Audio pin cable (supplied) 5 Video pin cable (supplied) 6 Component video pin cable (in case of a component connection) 7 Subwoofer pin cable (in case you connect a subwoofer) 8 Power supply cable (supplied) 1 4 3 2a 5 6 Setting up the listening environment automatically Connect the optimizer microphone to this unit. You can automatically adjust the various channel settings that best match your listening environment using the supplied optimizer microphone. Follow the procedure below to connect the optimizer microphone to this unit and place it in a proper location. Set the optimizer microphone at your normal listening position. Use the supplied cardboard microphone stand or a tripod to place the optimizer microphone at the same height as your ears would be when you are seated. Assemble the cardboard microphone stand and place the optimizer microphone on the top of the stand. Optimizer microphone (supplied) Cardboard microphone stand (supplied) If you have set the optimizer microphone, follow the steps on the backside to start th...