Оценок - 4, средний балл: 3.8 ( )

Производитель: Samsung Размер: 7.2 mb Название файла: Язык инструкции:

We hope you enjoy the state-of-art features and efficiencies that this new appliance offers. Selecting the best location for the Refrigerator • A location with easy access to the water supply. • A location without direct exposure to sunlight. • A location with level (or nearly level) flooring. • A location with enough space for the Refrigerator doors to open easily. • Allow sufficient space to the right, left, back and top for air circulation. If the Refrigerator does not have enough space, the internal cooling system may not work properly. • Please ensure that appliance can be moved freely in the event of maintenance & service. First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc. • Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower. • If you install the Refrigerator where is below 10.C, it may not function in optimum level. • Do not locate the refrigerator where the wet condition. When moving your refrigerator To prevent floor damage be sure the front leveling legs are in the up position(above the floor). Refer to ‘Adjusting the doors’ in the manual (on page 23) FLOORING For proper installation, this refrigerator must be placed on a level surface of hard material that is the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator, or approximately 106kg. To protect the finish of the flooring, cut a large section of the cardboard carton and place under the refrigerator where you are working. When moving the refrigerator, be sure to pull it straight out and return it to position by pushing it straight in. 150mm 100mm 100mm 150mm 100mm 100mm Flat-blade screwdriver(-) Control Lever 817mm RF62* : 1172mm RF67* : 1222mm RF62* : 1125mm RF67* : 1175mm 817mm 665mm 1492mm 1492mm RF62*:1455mm RF67*:1505mm 817mm Drawer-Type Swing-Type caution setting up _11 01 setting up setting up your refrigerator Insta llation of the water line (Auto Ice Maker Model) Before you install the water line • The water line installation is not warranted by the refrigerator manufacturer. So before you install the water line, read the whole steps for installing and follow these instructions carefully to minimize the risk of expensive water damage. • Banging pipes (water banging in the pipes) in house plumbing can cause damage to fridge parts and lead to water leakage or flooding. Call a qualified plumber to correct the problem before installing the water supply line to the fridge. • To prevent burns and product damage, do not hook up the water line to the hot water line. • Do not install the water line in areas where temperatures fall below freezing. • When using any electrical device (such as a power drill) during installation, be sure the device is insulated or wired in a manner to prevent electric shock. • All installations must be in a accordance with local plumbing code requirements. • Water line Kit and water filter are not covered by Samsung’s Warranty. The manufacturer (or dealer, installer) of them is responsible for any defects and all the loss caused by water filter & water line kit. • The filter should be replaced according to manufacturer (or dealer)’s instruction. • To order additional water filters, please contact the manufacturer (or dealer) of the filter. Check the accessories listed below. Using the water filter (not provided) Connecting to water supply line • Shut off the main water supply line and turn the Ice maker to the off position. • Locate the nearest cold drinking water line. • Follow the instructions in the water filter installation kit. • After connecting the water supply line to the Cartridge Holder inlet and installing the Filter Cartridge (insert plastic line in fully). • Turn on water supply and flush 3L into a bucket to clear the water filter. • The water filter must be installed outside the refrigerator. It is not provided with your new refrigerator. The filter cartridge (8) and holder (9) kit can be purchased from the retailer where you purchased this refrigerator. • Do not use copper line. • Cut the tubing, making sure the ends are square and clean. Water line fixer and screws Pipe connector Water line Fastner - Refer to ‘MAKING MINOR ADJUSTMENTS BETWEEN DOORS’(on page 24) Incorrect Correct 90 degree 1. C old Water line 2. P ipe Clamp. 3. P lastic line 4. C ompression Nut 5. C ompression Sleeve 6. P acking Nut 7. Shut Off Valve 8. Filter Cartridge 9. C artridge Holder 12_ setting up Connect the water line to the fridge • Connect the plastic line on the back of your fridge to the cartridge holder outlet (fully insert the plastic line to the cartridge holder outlet). • Insert plastic clip to the cartridge holder inlet and outlet. • Turn water on and check for any leakage. • You can purchase the necessary filter cartridge at the retailer where ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: