B. PREPARING OIL FOR FILTRATION NOTE: Oil in fryer must be between 250° - 350°F. 1. Turn fryer completely off. 2. Remove screen from over tubes/element with tongs or a Drain Clean Out Rod. Refer to Figure 3. FIGURE 3. REMOVE SCREEN OVERTUBES/ELEMENTS CAUTION Screen over tubes will be very hot and should be moved to a safe place. 3. Use spoon provided to stir oil. Bubbling will occur until all water is removed. Failure to do so will clog the filter paper. Refer to Figure 4. NOTE: Water settles in

_ Epurateur d'air TrueAif M English........................ USA: 1-800-851-8900 Français...................... Canada : 1-800-267-2826 840076500 FINAL APPROVAL: DATE: (7/. /Ж/oä I ■Q- 2 9 ■4/jk 5/¿.

2 USA: 1-800-851-8900 Francais ............................................ 17 Canada : 1-800-267-2826 Espanol .............................................. 32 Mexico: 01 800 71 16 100 Le invitamos a leer cuidadosamente este instructivo antes de usar su aparato. Epurateur d’air Purificador de aire 840129900 (Signer's identity unknown) Signed by EAD Time: 2005.02.03 14:46:47 -05'00' Reason: I am the author of this document Location: 5.5 X 8.5", English/French/Spanish, 48 pages, saddle stitch/Con

Unfold and flatten out the black carbon pre-filter. Attach the four corners of the carbon pre-filter to the four hook fasteners on the HEPA filter. Locate the black carbon pre-filter. It will be folded inside a plastic bag. Remove and discard the plastic bag. Installing the Carbon Pre-Filter Insert the two tabs on the bottom of the intake grille into the holes on the bottom ledge of the air purifier. Pivot the intake grille into place and lightly press on the upper corners of the grille to snap

Filter(s) OK Replace Filter(s) 1 2 The carbon pre-filter will last approximately three months. NOTE: You must reinstall and snap the intake grille before checking the filters with the gauge. The air purifier will not operate if the grille is not in place. Insert either end of the filter check gauge into the recessed hole on the top of outlet grille. Turn the fan on QuickClean.™ The colored cylinder should float up the filter check gauge. If it does not move from the bottom of the gauge, the filt

Intake Grille 2. Carbon Pre-Filter 3. HEPA Filter 4. Filter Check Gauge 5. Control Panel 6. Outlet Grille Pieces et caracteristiques 1. Grille d’entree 2. Prefiltre a charbon 3. Filtre HEPA 4. Jauge de verification du filtre 5. Tableau de commande 6. Grille de sortie EN FR 840115800 ENv00.qxd 6/6/03 9:01 AM Page 2 4 5 How to Assemble and Use IMPORTANT: Your Hamilton Beach air purifier is designed for easy use and maintenance. Make sure HEPA filter, and carbon pre-filter are properly installed be