These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as “Path Protected Mesh Network” and “PPMN,” refer generally to Cisco’s path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration. The Cisco ONS 15454 SDH integrates Ethernet into a SDH time-division multiplexing (TDM) p

SGM calls this ability User-Based Access. User-Based Access provides multi-level password-protected access to SGM features. Each user can have a unique user name and password. Each user can also be assigned to one of five levels of access, which control the list of SGM features accessible by that user. To configure SGM User-Based Access, perform the tasks in the following sections. Required and optional tasks are indicated. • Implementing SGM User-Based Access (Solaris Only), page 18-2 (Required

This chapter includes the following sections: • Multimedia Conference Manager Overview, page 289 • H.323 Gatekeeper Features, page 290 • H.323 Proxy Features, page 297 • H.323 Prerequisite Tasks and Restrictions, page 302 • H.323 Gatekeeper Configuration Task List, page 303 • H.323 Gatekeeper Configuration Examples, page 345 For a complete description of the H.323 gatekeeper commands used in this chapter, refer to the Cisco IOS Voice, Video, and Fax Command Reference. To locate documentation for

Note to System Installer For this apparatus, the coaxial cable shield/screen shall begrounded as close as practical to the point of entry of the cableinto the building. For products sold in the US and Canada, thisreminder is provided to call the system installer's attention toArticle 820-93 and Article 820-100 of the NEC (or CanadianElectrical Code Part 1), which provides guidelines for proper CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts

When it is time for the event to start, a message appears on the screen 30 seconds before the start of the event. You have the option to tune to the channel or to cancel the timer. The event will start if you do not press OK on the remote control within 30 seconds. To delete channels from this list, press the left arrow key to highlight the contents of the list. Select the channel you want to delete, and press the Red key to delete it. When you fi nish, press OK to save the list, or Back to canc

When OFF, the PVR will not record any scheduled events Remote Control Features Press the keys on the remote control to navigate through the menus, to access programmes, and to record programmes. Tip: Insert 2 new CR 2025-type cell batteries into the remote control. 1 Numbers change channels or find a percentage of a recording 13 2 Mode takes over TV remote control functionality 3 Arrows navigate through menus 4 Live TV displays full-screen live TV 1 Tekst STB Teletext 6 Terug goes back to previo

WARNING: This exclamation point indicates that there is a caution or warning and it is something that could damage your property or product. WEB: This globe icon indicates a noteworthy website address or e-mail address. Online Resources Website addresses in this document are listed without in front of the address because most current web browsers do not require it. If you use an older web browser, you may have to add in front of the web address. Resource Website Linksys Linksys International Glo

• Digital content is encrypted with High-Bandwidth Content Protection (HDCP) on the DVI/HDMI port. This set-top is not compatible with devices that do not support HDCP. You must use either the YPbPr or 1394 connection (which uses Digital Transmission Content Protection, or DTCP) to connect the set-top to these devices. • Also refer to the Important Notes Regarding the HDMI Interface on the Set-Top on page 11. CABLE OUT S-VIDEO OUT USB 2.0 120VAC 60Hz 80W 120 VAC 60Hz 4.2A 500W OPTICAL AUDIO OUT

The picture format for an HDTV is a combination of aspect ratio and screen resolution and is different for standard-screen and wide-screen HDTVs. What is Aspect Ratio? An aspect ratio is the ratio of the width to the height of the TV screen. The aspect ratios differ because the television industry manufactures both standard-screen and wide-screen HDTVs to appeal to consumer viewing preferences. What is the Screen Resolution and Scan Rate? The screen resolution indicates the amount of detail that

Do not use these cables if you are using the HDMI connection 8 Out 2 Connects to either a VCR or to another set of inputs (composite) on your TV (Secondary Audio Out) 9 Digital Audio Out Connects to an RCA cable that sends a digital audio signal to a surround-sound receiver or other digital audio device 10 S-Video Out Connects to S-Video input of a standard TV or VCR 11 IR Connector reserved for future use 12 Optical Audio Out Connects to an optical cable that sends a digital audio signal to a s