Оценок - 5, средний балл: 3.6
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
14 : 0 0 1 5 : 00 FGH 0 2 0 : 00 21 : 0 0 AAB 29 . 9 .9 6: 3 0 7: 0 0 IJ K 1. 1 0 3 SELECT SMART SEARCH 180MIN : 19 : 0 0 2 0 : 00 328 . 9 5 DATE TIME PROG. 30MIN. BLANK TIME SET : OK EXIT : SMART SEARCH Searching using the Smart Search function 4 Press OK. The VCR starts searching, and playback starts automatically from the beginning of the selected programme. SMART SEARCH 180MIN. NOW SEARCHING To stop searching Press x STOP. To exit the SMART SEARCH screen Press SMART SEARCH. To record in a blank space Blank space on the tape will appear as a blank row in the SMART SEARCH screen. Select the last blank row in step 3, then press OK. The VCR rewinds/fast-forwards the tape to the beginning of the blank space, then stops. Start recording. Note that “BLANK TIME” and the remaining time 14:00 15:00 FGH029.9 .93SELECT SMART SEARCH 180MIN : DATE TIME PROG. 30MIN. BLANK TIME 20:00 21:00 AAB6:30 7:00 1.10 IJK : SET EXIT : SMART SEARCH OK indication only refers to the length of the last blank space. To recall the latest data screen after you remove the tape You can display the data of the last tape used to record a programme, even after you have removed the tape. If you reinsert the tape and record additional programmes, be sure to select LATEST DATA. Otherwise, all of the data for the tape is deleted. 1 Reinsert the last tape that you used to record a programme. 2 Press SMART SEARCH. Additional Operations SMART SEARCH NO DATA LATEST DATA SELECT : SET : EXIT : SMART SEARCH OK continued Searching using the Smart Search function 3 Press M/m to highlight LATEST DATA. If you want to reset the latest data screen, highlight NO DATA and press OK, then record a programme. 14 : 0 0 1 5 : 00 FGH 0 29 . 9 .93 19 : 0 0 2 0 : 00 3 DATE TIME PROG. 28 . 9 5 SET : SELECT : OK SMART SEARCH NO DATA LATEST DATA 20 : 0 0 2 1 : 00 AAB 6: 3 0 7: 0 0 IJ K 1. 1 0 EXIT : SMART SEARCH 4 Press OK. The latest data stored in the VCR’s memory is displayed. Tips • You can store information for up to 24 programmes on a single list. • While recording, you can display the SMART SEARCH screen using the SMART SEARCH button. If you decide to stop recording, press SMART SEARCH to make the SMART SEARCH screen disappear first. Then press x STOP. Notes • You cannot use this function unless the clock is set. • Depending on the tape, the total or remaining time may not appear correctly. • If many short programmes are recorded on a tape, multiple programmes may be included in a single block. In this case, only the latest programme information will appear in the SMART SEARCH screen. • Blank time is measured from the end of the last recorded programme to the end of the tape. However, if you eject the tape and then make a new recording on the same tape, the original recorded programme(s) is displayed as a blank space. • If no information is stored in the VCR’s memory, LATEST DATA does not appear in the SMART SEARCH screen. • The station name* may not appear if the VCR does not receive station name information signals. • If you start recording a programme “D” from the middle of a previously recorded programme “A” and into another previously recorded programme “B,” the Smart Search information for the second programme “B,” which is recorded over, is deleted. Originally recorded programmes A BC Recording the programme “D” over the programme “A” and “B” AD C * not available on SLV-SE600A/E and SX600E Searching using the Smart Search function Searching using the index function The VCR automatically marks the tape with an index signal at the point where e...
Эта инструкция также подходит к моделям:Видеомагнитофоны/видеоплееры - SLV-SE600A (1.13 mb)
Видеомагнитофоны/видеоплееры - SLV-SE600E (1.13 mb)
Видеомагнитофоны/видеоплееры - SLV-SE650D (1.13 mb)
Видеомагнитофоны/видеоплееры - SLV-SE700D1 (1.13 mb)