Оценок - 2, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• If you start recording a programme “D” from the middle of a previously recorded programme “A” and into another previously recorded programme “B,” the Smart Search information for the second programme “B,” which is recorded over, is deleted. Originally recorded programmes A BC Recording the programme “D” over the programme “A” and “B” AD C * not available on SLV-SE600A/E and SX600E Searching using the Smart Search function Searching using the index function The VCR automatically marks the tape with an index signal at the point where each recording begins. Use these signals as references to find a specific recording. 1 2 3 ./> INDEX SEARCH 1 Insert an indexed tape into the VCR. 2 Press ./> INDEX SEARCH. • To search ahead, press > INDEX SEARCH. INDEX SEARCH • To search backwards, press . INDEX SEARCH. The VCR starts searching, and playback starts automatically from that point. To stop searching Press x STOP. Notes • No index signal will be added when recording starts from recording pause. However, an index signal will be marked if you change the programme position during recording pause. • When you press . INDEX SEARCH, if there is nothing recorded before the selected index signal, playback may not start exactly at the index signal. Additional Operations Searching using the index function Adjusting the picture Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape (the indicator flashes in the display window, then turns off), distortion may occur if the recording is in poor condition. In this case, manually adjust the tracking. During playback, press TRACKING +/– to display the tracking meter. The distortion should disappear as you press one of the two buttons (the indicator TRACKING Tracking meter lights up). To resume automatic tracking adjustments, eject the tape and re-insert it. About the Reality Regenerator (RR) function (not available on SLV-SE600A/E and SX600E) The Reality Regenerator (RR) function automatically restores the picture to its original quality during playback. To use the RR function, press RR. The RR button lights up. You can set RR to NORMAL or HIGH in the OPTIONS-2 menu (see page 79). To turn it off, press RR. The RR RR button turns off. About the Optimum Picture Control (OPC) function The Optimum Picture Control (OPC) function automatically improves recording and playback quality by adjusting the VCR to the condition of the video heads and tape. To maintain better picture quality, we recommend that you set OPC to ON in SELECT : OPTIONS - 1 ON OFF OFF OPC OFF NICAMHIFI AUDIO E180 EDIT AUDIO MIX AUTO LONG PLAY TAPE LENGTH RETURN the OPTIONS-1 menu (the OPC indicator lights up in the display window). For details, see page 78. SET : EXIT : MENU OK OPC playback The OPC function automatically works on all types of tapes, including rental tapes and tapes that were not recorded with OPC. OPC recording Whenever you insert a tape and start recording for the first time, the VCR adjusts to the tape using the OPC function (the OPC indicator flashes rapidly). This adjustment is retained until the tape is ejected. Adjusting the picture To deactivate the OPC function Set OPC to OFF in the OPTIONS-1 menu. The OPC indicator in the display window turns off. Tip • To set tracking to the centre position, press the TRACKING + and – buttons at the same time. Notes • You can adjust the tracking for an NTSC-recorded tape but the tracking meter won’t be displayed. • With the Auto Long Play function on, the OPC function will work only in SP mode. If the tap...
Эта инструкция также подходит к моделям:Видеомагнитофоны/видеоплееры - SLV-SE600A (1.13 mb)
Видеомагнитофоны/видеоплееры - SLV-SE600E (1.13 mb)
Видеомагнитофоны/видеоплееры - SLV-SE650D (1.13 mb)
Видеомагнитофоны/видеоплееры - SLV-SE700D1 (1.13 mb)