Оценок - 4, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The recording start time and recording stop time can be set at one minute intervals. DIAL TIMER ?/1 ON/STANDBY x STOP X PROGRAM +/– Before you start... • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • To record from a decoder, turn it on. 1 2 3 4 5 6 7 8 9 0 INPUT SELECT 1 1 Press DIAL TIMER. DIAL TIMER “DATE” and “TODAY” appear alternately in the display window. If the date and time are not set, “DAY” will appear. See step 2 in the following section, “To set the clock” to set the date and time. SP VIDEO OPC SP VIDEO OPC Recording TV programmes using the Dial Timer (SLV-SE800D1/D2/E and SX800D only) Turn DIAL TIMER to set the recording date. DIAL TIMER VIDEOSP OPC Press DIAL TIMER. DIAL TIMER “START” and the current time appear alternately in the display window. SP VIDEO OPC SP VIDEO OPC Turn DIAL TIMER to set the recording start time. DIAL TIMER You can set the recording start time in 15 minute intervals or adjust the time in one minute intervals by pressing the PROGRAM +/– buttons. SP VIDEO OPC Basic Operations PROGRAM TRACKING Press DIAL TIMER. DIAL TIMER “STOP” and the recording stop time appear alternately in the display window. SP VIDEO OPC SP VIDEO OPC continued Recording TV programmes using the Dial Timer (SLV-SE800D1/D2/E and SX800D only) 6 6 Turn DIAL TIMER to set the recording stop time. DIAL TIMER TRACKING You can set the recording stop time in 15 minute intervals or adjust the time in one minute intervals by pressing the PROGRAM +/– buttons. PROGRAM VIDEOSP OPC 7 7 Press DIAL TIMER. DIAL TIMER The programme position or station name appears in the display window. VIDEOSP OPC 8 8 Turn DIAL TIMER to set the programme position. DIAL TIMER To record from a decoder or other source connected to one or more of the LINE inputs, turn DIAL TIMER or press INPUT SELECT to display the connected line in the display window. SP VIDEO OPC INPUT SELECT 9 9 Press DIAL TIMER to complete the setting. DIAL TIMER “OK” appears in the display window for about five seconds. The indicator appears in the display window and the VCR stands by for recording. To record from a decoder or other source, leave the connected equipment switched on. To return to the previous step To return to the previous step, press the PROGRAM + and – buttons on the VCR at the same time during any of the Dial Timer settings. To stop recording To stop the VCR while recording, press x STOP. Recording TV programmes using the Dial Timer (SLV-SE800D1/D2/E and SX800D only) To use the VCR after setting the timer To use the VCR before a recording begins, just press ?/1. The indicator turns off and the VCR switches on. Remember to press ?/1 to reset the VCR to recording standby after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter (page 42). • Display tape information on the TV screen (page 45). • Check the timer settings (page 68). • Watch another TV programme (page 45). To set the clock 1 Turn DIAL TIMER so that “CLOCK” appears in the display window. 2 Press DIAL TIMER. “DAY” appears in the display window. 3 Turn DIAL TIMER to set the day. 4 Press DIAL TIMER. “MONTH” appears in the display window. 5 Turn and press DIAL TIMER to set the month, and then the year. After you set the year, “CLOCK” appears in the display window again. 6 Turn and press DIAL TIMER to set the hour and minute. 7 When you have finished setting the time, press DIAL TIMER to start the clock. Tips • To cancel a Dial Timer setting, press x STOP on the VCR while you are making the setting. • The programme is recorded in the current tape speed mode. To change the tape speed, press SP/LP before you complete the setting in step 9. • When you are recording a programme in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the LP mode. Note that some interference will appear on the picture at the point the tape speed is changed. If you want to keep the same tape speed, set AUTO LONG PLAY to OFF in the OPTIONS-1 menu (page 79). • To check, change, or cancel the programme setting, see “Checking/changing/cancelling timer settings” (page 68). Notes • If eight programmes have already been set using the ShowView system or the TIMER menu, “FULL” appears in the display window for about five seconds. • The indicator flashes in the display window when you complete the setting in step 9 with no tape inserted. • If you set the clock using the Auto Clock Set function and AUTO ADJUST is set to ON, the clock will adjust itself to the incoming time signal regardless of adjustments made with the Dial Timer. Be sure you have set the Auto Clock Set correctly. • The station name may not appear if the VCR does not receive station name information signals. Basic Operations continued Recording TV programmes using the Dial Timer (SLV-SE800D1/D2/E and SX800D only) About the Demonstration Mode The Dial Timer function has a Demonstration Mode th...
Эта инструкция также подходит к моделям:Видеомагнитофоны/видеоплееры - SLV-SE600A (1.13 mb)
Видеомагнитофоны/видеоплееры - SLV-SE600E (1.13 mb)
Видеомагнитофоны/видеоплееры - SLV-SE650D (1.13 mb)
Видеомагнитофоны/видеоплееры - SLV-SE700D1 (1.13 mb)