Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Видеомагнитофоны/видеоплееры - SLV-SE630E (972.83 kb)
Видеомагнитофоны/видеоплееры - SLV-SE630E (980.76 kb)
Фрагмент инструкции
Select a programme position when recording TV programmes; select a line input when recording from other equipment. TV reception is poor. • Make sure the aerial cable is connected securely. • Adjust the TV aerial. The tape starts playing as soon as it is inserted. • The safety tab has been removed. To record on this tape, cover the tab hole (see page 42). The tape is ejected when you press z REC. • The safety tab has been removed. To record on this tape, cover the tab hole (see page 42). Nothing happens when you press z REC. • Make sure the tape is not at its end. Timer recording The timer does not operate. • Check that the clock is set. • Make sure a tape has been inserted. • Check that the safety tab has not been removed. • Make sure the tape is not at its end. • Make sure a programme has been set for timer recording. • Make sure your timer settings are past the current time. • Check that the decoder is turned on. • Check that the satellite tuner is turned on. • The clock stops if the VCR is disconnected from the mains. Reset the clock and timer. • Turn the power off and unplug the mains lead. The SHOWVIEW menu or the TIMER PROGRAMMING menu does not appear. • Check that TIMER METHOD in the EASY OPERATION menu is set correctly (see page 69). Additional continued Troubleshooting Symptom Remedy Timer recordingThe VPS/PDC function does not operate properly. • Check that the clock and the date are set correctly. • Check that the VPS/PDC time you set is the correct one (there might be a mistake in the TV programme guide). If the broadcast you wanted to record did not send the good VPS/PDC information, the VCR will not start recording. • If the reception is poor, the VPS/PDC signal might be altered and the VCR might not start recording. PAY-TV/Canal Plus You cannot watch PAY- TV/Canal Plus programmes when the VCR is in standby mode. • Check that DEC is set to ON for this channel in the TV STATION TABLE menu. • Make sure the PAY-TV/Canal Plus Scart cable is plugged securely. A PAY-TV/Canal Plus programme is always recorded scrambled. • Make sure the PAY-TV/Canal Plus Scart cable is plugged securely. • Check that DEC is set to ON for this channel in the TV STATION TABLE menu. Others A tape cannot be inserted. • Check that a tape is not already in the tape compartment. The remote commander does not function. • Make sure you are pointing the remote commander at the remote sensor on the VCR. • Replace all the batteries in the remote commander with new ones if they are weak. • Make sure the [TV] / [VIDEO] remote control switch is set correctly. The selected input line connector number does not appear in the display window. • Press INPUT SELECT to display the connected line. The tracking meter does not appear on the TV screen. • The recording condition of the tape is very poor and tracking cannot be adjusted. You cannot control other TVs. • Set your TV’s code number. The code number may change when you replace the batteries of the remote commander. The display window becomes dim. • The display window automatically becomes dim when the VCR is in standby or timer recording mode. The VCR needs to be cleaned. • Clean the cabinet, panel and controls with a dry, soft cloth, or a soft cloth slightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine. The Line Through function does not operate. • Set POWER SAVE in the USER SET menu to OFF (see page 67). Troubleshooting Symptoms caused by contaminated video heads • Normal picture • Rough picture • Unclear picture • No picture (or black & white screen appears) initial terminal contamination Additional Troubleshooting Specifications System Channel coverage PAL (B/G) VHF E2 to E12 VHF Italian channel A to H UHF E21 to E69 CATV S01 to S05, S1 to S20 HYPER S21 to S41 RF output signal UHF channels 21 to 69 Aerial out 75-ohm asymmetrical aerial socket Tape speed SP: PAL 23.39 mm/s (recording/ playback) NTSC 33.35 mm/s (playback only) LP: PAL 11.70 mm/s (recording/ playback)* NTSC 16.67 mm/s (playback only) EP: NTSC 11.12 mm/s (playback only)* Maximum recording/playback time 10 hrs. in LP mode (with E300 tape) Rewind time Approx. 1 min. (with E180 tape) * not available on SLV-SE230D Inputs and outputs LINE-1 (EURO AV) 21-pin Video input: pin 20 Audio input: pins 2 and 6 Video output: pin 19 Audio output: pins 1 and 3 LINE-2 (DEC/EXT)/LINE-3 (DEC/EXT) 21-pin Video input: pin 20 Audio input: pins 2 and 6 t LINE-2 L o R*1 VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (2) Input level: 327 mVrms Input impedance: more than 47 kilohms AUDIO (OUT/SORTIE) R/D L/G*2 Phono jack (2) Rated output level: 327 mVrms Load impedance: 47 kilohms Output impedance: less than 10 kilohms *1 SLV-SE830D/E only *2 not available on SLV-SE630D/E and SE230D General Power requirements 220 – 240 V AC, 50 Hz Power consumption • SLV-SE230D 15 W 1.2 W (POWER SAVE is set to ECO2, minimum) •SLV-SE630D/E 17 W 1.2 W (P...
Эта инструкция также подходит к моделям:Видеомагнитофоны/видеоплееры - SLV-SE230D (2.1 mb)
Видеомагнитофоны/видеоплееры - SLV-SE630D (2.1 mb)
Видеомагнитофоны/видеоплееры - SLV-SE730D (2.1 mb)
Видеомагнитофоны/видеоплееры - SLV-SE730E (2.1 mb)