Оценок - 4, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Видеомагнитофоны/видеоплееры - SLV-SE830D (972.83 kb)
Видеомагнитофоны/видеоплееры - SLV-SE830D (980.76 kb)
Фрагмент инструкции
For two-digit numbers, for example, press 2 and 3 to select “PR 23.” • If you connect additional equipment to a LINE connector or jack, you can select the input signal using the INPUT SELECT or PROG +/– buttons. • The DISPLAY information appears on the TV screen indicating information about the tape, but the information will not be recorded on the tape. • If you do not want to watch TV while recording, you can turn off the TV. When using a decoder, make sure to leave it on. Notes • The DISPLAY information does not appear during still (pause) mode or slow- motion playback. • If a tape has portions recorded in both PAL and NTSC systems, the time counter reading will not be correct. This discrepancy is due to the difference between the counting cycles of the two video systems. • You cannot watch a PAY-TV/Canal Plus programme while recording another PAY- TV/Canal Plus programme. • When you insert a non-standard commercially available tape, the remaining time may not be correct. • The remaining time is intended for rough measurement only. • About 30 seconds after the tape begins playback, the tape remaining time will be displayed. * not available on SLV-SE230D Recording TV programmes Recording what you are watching on the TV (TV Direct Rec) (not available on SLV-SE630D/E and SE230D) If you use the SMARTLINK connection, you can easily record what you are watching on the TV (other than tapes being played on the VCR). 1 Press ?/1 to turn on the VCR. 2 Insert a tape with its safety tab in place. 3 Press z REC while you are watching a TV programme or external source. The TV indicator lights up and the VCR starts recording what you are watching on the TV. Tip • The TV indicator appears in the display window after you press z REC in some situations such as: – when you are watching a source connected to the TV’s line input, or – when the TV tuner preset data for the programme position is different from the data in the VCR tuner preset. Notes • You cannot record what you are watching using this method when the VCR is in the following modes; pause, timer standby, tuner preset, Auto Set Up, and recording. • When the TV indicator is lit in the display window, do not turn off the TV nor change the TV programme position. When the TV indicator is not lit, the VCR continues recording the programme even if you change the TV programme position on the TV. • To use the TV Direct Rec function, select SMARTLINK in the INSTALLATION menu, then set TV DIRECT RECORD to ON. Basic Operations Recording TV programmes Recording TV programmes using the Dial Timer (SLV-SE830D/E only) The Dial Timer function allows you to make timer recordings of programmes without turning on your TV. Set the recording timer to record up to eight programmes, including settings made with other timer methods, that will be broadcast DIAL TIMER ?/1 x within the next month. The recording start PROGRAM +/– X time and recording stop time can be set at one minute intervals. Before you start... • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • To record from a decoder, turn it on. • Refer to “Index to parts and controls” for button locations. 1 1 DIAL TIMER Press DIAL TIMER. “DATE” and “TODAY” appear alternately in the display window. If the date and time are not set, “DAY” will appear. See step 2 in the following section, “To set the clock” to set the date and time. 2 2 DIAL TIMER Turn DIAL TIMER to set the recording date. Recording TV programmes using the Dial Timer (SLV-SE830D/E only) DIAL TIMER Press DIAL TIMER. “START” and the current time appear alternately in the display window. DIAL TIMER Turn DIAL TIMER to set the recording start time. You can set the recording start time in 15 minute intervals or adjust the time in one minute intervals by pressing the PROGRAM +/– buttons. Basic Operations PROGRAM DIAL TIMER Press DIAL TIMER. “STOP” and the recording stop time alternately appear in the display window. DIAL TIMER Turn DIAL TIMER to set the recording stop time. You can set the recording stop time in 15 minute intervals or adjust the time in one minute intervals by pressing the PROGRAM +/– buttons. PROGRAM continued Recording TV programmes using the Dial Timer (SLV-SE830D/E only) 7 7 DIAL TIMER Press DIAL TIMER. The programme position or LINE input appears in the display window. 8 8 DIAL TIMER Turn DIAL TIMER to set the programme position. INPUT SELECT To record from a decoder or other source connected to one or more of the LINE inputs, turn DIAL TIMER or press INPUT SELECT to display the connected line in the display window. 9 9 DIAL TIMER Press DIAL TIMER to complete the setting. “OK” appears in the display window for about five seconds. The indicator appears in the display window and the VCR stands by for recording. To record from a decoder or other source, leave the connected equipment switched on. To return to the previous step To return to the previous step, press the PROGRAM + and – buttons on the VCR...
Эта инструкция также подходит к моделям:Видеомагнитофоны/видеоплееры - SLV-SE230D (2.1 mb)
Видеомагнитофоны/видеоплееры - SLV-SE630D (2.1 mb)
Видеомагнитофоны/видеоплееры - SLV-SE630E (2.1 mb)
Видеомагнитофоны/видеоплееры - SLV-SE730D (2.1 mb)