Оценок - 4, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
( 22) FUNC. [ MENU] [ DISPLAY SETUP] [LANGUAGE ] Desired language FUNC. NOTES • If you changed the language by mistake, follow the mark next to the menu item to change the setting. • The display that appears in some menu screens refers to the name of buttons on the camcorder and will not change, regardless of the language selected. 24 • Preparations 90° 180° Changing the Time Zone Change the time zone to match your location. The default setting is New York. FUNC. ( 22) FUNC. [ MENU] [ DATE/TIME SETUP] [T.ZONE/DST] Desired time zone* FUNC. * To adjust for daylight saving time, select the area name marked with a . World Time Zones Once you have set the time zone, date and time, you do not need to reset the clock every time you travel to another time zone. Select the time zone to match the local time at your destination, referring to the date and time displayed on the screen. 1 Open the date and time setup screen. FUNC. [ MENU] [ DATE/TIME SETUP] [T.ZONE/DST] 2 Move the orange selection frame ( ) to the time zone. 3 Select ( ) the area that corresponds to the local time at your destination and press . • Refer to the changing date and time displayed on the screen. • To adjust for daylight saving time, select the area name marked with a . 4 Press FUNC. to close the menu. Getting Ready to Start Recording Opening the Lens Cover and Adjusting the LCD screen Before you start recording, open the lens cover. Move the lens cover switch down to to open the lens cover. Rotating the LCD Panel Open the LCD panel 90 degrees. You can rotate the panel 90 degrees downward. You can rotate the panel 180 degrees toward the lens (allowing the subject to monitor the LCD screen while you use the viewfinder). This is the only case where you can use the viewfinder and the LCD screen simultaneously. Rotating the LCD panel 180 degrees can be useful when you wish to include Preparations • 25 yourself in the picture when recording with the self timer. 180° Subject can monitor the LCD screen NOTES About the LCD and viewfinder screen: The screens are produced using extremely high-precision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black, red, blue or green dots. This has no effect on the recorded image and does not constitute a malfunction. LCD Backlight You can set the brightness of the LCD screen to normal or bright. Hold DISP. pressed down for more than 2 seconds. Repeat this action to toggle between the normal and bright settings. NOTES • This setting does not affect the brightness of the recording. • Using the bright setting will shorten the effective usage time of the battery pack. Inserting and Removing a Disc Use only 8 cm (3 in.) mini DVD discs marked with the DVD-R logo (including DVD-R DL) or the DVD-RW logo. Refer also to Discs that have been tested ( 6). Before inserting the disc be sure to check that the recording surface is clean. If necessary, use a soft lens- cleaning cloth to remove any fingerprints, dirt buildup or smudges from the disc surface. Inserting the Disc ( 21) Pick up lens 1 Turn the switch to ON to set the camcorder in mode. 2 Slide fully in the direction of the arrow and gently open the disc cover completely until it stops. OPEN 26 • Preparations OPEN Retract the grip belt under the camcorder so it will not get in the way of the disc cover. 3 Insert the disc and press its center firmly until it clicks in place. • Insert the disc with the recording side facing down (single sided discs – label side facing out). • Be careful not to touch the recording surface of the disc or the pick up lens. 4 Close the disc cover. Do not force the cover closed if the disc is not correctly inserted and firmly set in place. NOTES The process of recognizing a disc may take a moment. The display will move while the disc is being read. Wait until the camcorder finishes recognizing the disc before you start recording. WHEN USING DVD-R/DVD-R DL DISCS You can start recording movies once the record pause indicator appears. WHEN USING DVD-RW DISCS You need to initialize new discs before you can start recording. The disc initialization screen will appear when a new DVD-RW disc is first inserted if the / switch is set to (movies). If the disc is already initialized, you can start recording movies once the record pause indicator appears. Otherwise, perform the following steps to initialize the disc. Select ( ) the desired disc specification and press . For a comparison between the VIDEO and VR specifications, see How to Select a DVD Disc ( 5). A confirmation message will appear on the screen. Select ( ) [YES] and press to start the disc initialization, or select [NO] and press to return and select a different disc specification. • The disc initialization will take approximately one minute. Avoid moving the camcorder while the operation is in progress. • You can start recording movies once the record pause indicator appears. Rem...
Эта инструкция также подходит к моделям:Видеокамеры - DC320 (3.4 mb)